u-boot/board/esd/pci405/writeibm.S
Wolfgang Denk 1b387ef55c SPDX: fix IBM-pibs license identifier
The SPDX License List version 1.19 now contains an official entry for
the IBM-pibs license.  However, instead of our suggestion "ibm-pibs",
the SPDX License List uses "IBM-pibs", with the following rationale:
"The reason being that all other SPDX License List short identifiers
tend towards using capital letters unless spelling a word.  I'd prefer
to be consistent to this end".

Change the license IDs to use the official name.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-09-20 10:30:54 -04:00

205 lines
3.8 KiB
ArmAsm

/*
* SPDX-License-Identifier: GPL-2.0 IBM-pibs
*/
/*----------------------------------------------------------------------------- */
/* Function: ext_bus_cntlr_init */
/* Description: Initializes the External Bus Controller for the external */
/* peripherals. IMPORTANT: For pass1 this code must run from */
/* cache since you can not reliably change a peripheral banks */
/* timing register (pbxap) while running code from that bank. */
/* For ex., since we are running from ROM on bank 0, we can NOT */
/* execute the code that modifies bank 0 timings from ROM, so */
/* we run it from cache. */
/* Bank 0 - Flash and SRAM */
/* Bank 1 - NVRAM/RTC */
/* Bank 2 - Keyboard/Mouse controller */
/* Bank 3 - IR controller */
/* Bank 4 - not used */
/* Bank 5 - not used */
/* Bank 6 - not used */
/* Bank 7 - FPGA registers */
/*----------------------------------------------------------------------------- */
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
.globl write_without_sync
write_without_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start1:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id */
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
b start1
blr /* never reached !!!! */
.globl write_with_sync
write_with_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start2:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id */
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
sync
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
sync
b start2
blr /* never reached !!!! */
.globl write_with_less_sync
write_with_less_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start2b:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id */
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
sync
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
/* sync */
b start2b
blr /* never reached !!!! */
.globl write_with_more_sync
write_with_more_sync:
/*
* Write one values to host via pci busmastering
* ptr = 0xc0000000 -> 0x01000000 (PCI)
* *ptr = 0x01234567;
*/
addi r31,0,0
lis r31,0xc000
start3:
lis r0,0x0123
ori r0,r0,0x4567
stw r0,0(r31)
sync
/*
* Read one value back
* ptr = (volatile unsigned long *)addr;
* val = *ptr;
*/
lwz r0,0(r31)
sync
/*
* One pci config write
* ibmPciConfigWrite(0x2e, 2, 0x1234);
*/
/* subsystem id (PCIC0_SBSYSVID)*/
li r4,0x002C
oris r4,r4,0x8000
lis r3,0xEEC0
stwbrx r4,0,r3
sync
li r5,0x1234
ori r3,r3,0x4
stwbrx r5,0,r3
sync
b start3
blr /* never reached !!!! */