mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
83083febf5
In cases when the same SPL should run on boards with i.MX8MM, that differ in DDR configuration, it is necessary to try different parameters and check if the training done by the firmware suceeds or not. Therefore we return the DDR training/initialization success to the upper layer in order to be able to retry with different settings if necessary. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
190 lines
3.8 KiB
C
190 lines
3.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/ddr.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/ddr.h>
|
|
#include <asm/arch/lpddr4_define.h>
|
|
|
|
static inline void poll_pmu_message_ready(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
do {
|
|
reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0004);
|
|
} while (reg & 0x1);
|
|
}
|
|
|
|
static inline void ack_pmu_message_receive(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0031, 0x0);
|
|
|
|
do {
|
|
reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0004);
|
|
} while (!(reg & 0x1));
|
|
|
|
reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0031, 0x1);
|
|
}
|
|
|
|
static inline unsigned int get_mail(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
poll_pmu_message_ready();
|
|
|
|
reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0032);
|
|
|
|
ack_pmu_message_receive();
|
|
|
|
return reg;
|
|
}
|
|
|
|
static inline unsigned int get_stream_message(void)
|
|
{
|
|
unsigned int reg, reg2;
|
|
|
|
poll_pmu_message_ready();
|
|
|
|
reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0032);
|
|
|
|
reg2 = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0034);
|
|
|
|
reg2 = (reg2 << 16) | reg;
|
|
|
|
ack_pmu_message_receive();
|
|
|
|
return reg2;
|
|
}
|
|
|
|
static inline void decode_major_message(unsigned int mail)
|
|
{
|
|
debug("[PMU Major message = 0x%08x]\n", mail);
|
|
}
|
|
|
|
static inline void decode_streaming_message(void)
|
|
{
|
|
unsigned int string_index, arg __maybe_unused;
|
|
int i = 0;
|
|
|
|
string_index = get_stream_message();
|
|
debug("PMU String index = 0x%08x\n", string_index);
|
|
while (i < (string_index & 0xffff)) {
|
|
arg = get_stream_message();
|
|
debug("arg[%d] = 0x%08x\n", i, arg);
|
|
i++;
|
|
}
|
|
|
|
debug("\n");
|
|
}
|
|
|
|
int wait_ddrphy_training_complete(void)
|
|
{
|
|
unsigned int mail;
|
|
|
|
while (1) {
|
|
mail = get_mail();
|
|
decode_major_message(mail);
|
|
if (mail == 0x08) {
|
|
decode_streaming_message();
|
|
} else if (mail == 0x07) {
|
|
debug("Training PASS\n");
|
|
return 0;
|
|
} else if (mail == 0xff) {
|
|
debug("Training FAILED\n");
|
|
return -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
void ddrphy_init_set_dfi_clk(unsigned int drate)
|
|
{
|
|
switch (drate) {
|
|
case 3200:
|
|
dram_pll_init(MHZ(800));
|
|
dram_disable_bypass();
|
|
break;
|
|
case 3000:
|
|
dram_pll_init(MHZ(750));
|
|
dram_disable_bypass();
|
|
break;
|
|
case 2400:
|
|
dram_pll_init(MHZ(600));
|
|
dram_disable_bypass();
|
|
break;
|
|
case 1600:
|
|
dram_pll_init(MHZ(400));
|
|
dram_disable_bypass();
|
|
break;
|
|
case 1066:
|
|
dram_pll_init(MHZ(266));
|
|
dram_disable_bypass();
|
|
break;
|
|
case 667:
|
|
dram_pll_init(MHZ(167));
|
|
dram_disable_bypass();
|
|
break;
|
|
case 400:
|
|
dram_enable_bypass(MHZ(400));
|
|
break;
|
|
case 100:
|
|
dram_enable_bypass(MHZ(100));
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
void ddrphy_init_read_msg_block(enum fw_type type)
|
|
{
|
|
}
|
|
|
|
void lpddr4_mr_write(unsigned int mr_rank, unsigned int mr_addr,
|
|
unsigned int mr_data)
|
|
{
|
|
unsigned int tmp;
|
|
/*
|
|
* 1. Poll MRSTAT.mr_wr_busy until it is 0.
|
|
* This checks that there is no outstanding MR transaction.
|
|
* No writes should be performed to MRCTRL0 and MRCTRL1 if
|
|
* MRSTAT.mr_wr_busy = 1.
|
|
*/
|
|
do {
|
|
tmp = reg32_read(DDRC_MRSTAT(0));
|
|
} while (tmp & 0x1);
|
|
/*
|
|
* 2. Write the MRCTRL0.mr_type, MRCTRL0.mr_addr, MRCTRL0.mr_rank and
|
|
* (for MRWs) MRCTRL1.mr_data to define the MR transaction.
|
|
*/
|
|
reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4));
|
|
reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8) | mr_data);
|
|
reg32setbit(DDRC_MRCTRL0(0), 31);
|
|
}
|
|
|
|
unsigned int lpddr4_mr_read(unsigned int mr_rank, unsigned int mr_addr)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x1);
|
|
do {
|
|
tmp = reg32_read(DDRC_MRSTAT(0));
|
|
} while (tmp & 0x1);
|
|
|
|
reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4) | 0x1);
|
|
reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8));
|
|
reg32setbit(DDRC_MRCTRL0(0), 31);
|
|
do {
|
|
tmp = reg32_read(DRC_PERF_MON_MRR0_DAT(0));
|
|
} while ((tmp & 0x8) == 0);
|
|
tmp = reg32_read(DRC_PERF_MON_MRR1_DAT(0));
|
|
tmp = tmp & 0xff;
|
|
reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x4);
|
|
|
|
return tmp;
|
|
}
|