u-boot/arch/arm/cpu/armv7/ls102xa/soc.c
Yao Yuan 6c4a1eba3f armv7/fsl-ls102xa: Workaround for DDR erratum A008514
This is a workaround for hardware erratum.
Write the value of 63b2_0042h to EDDRTQCFG will optimal the
memory controller performance.

The value: 63b2_0042h comes from the hardware team.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-15 08:57:32 +08:00

90 lines
2.6 KiB
C

/*
* Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/ls102xa_soc.h>
unsigned int get_soc_major_rev(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr, major;
svr = in_be32(&gur->svr);
major = SVR_MAJ(svr);
return major;
}
int arch_soc_init(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
unsigned int major;
#ifdef CONFIG_FSL_QSPI
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
#ifdef CONFIG_FSL_DCU_FB
out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
#endif
/* Configure Little endian for SAI, ASRC and SPDIF */
out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE);
/*
* Enable snoop requests and DVM message requests for
* All the slave insterfaces.
*/
out_le32(&cci->slave[0].snoop_ctrl,
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
out_le32(&cci->slave[1].snoop_ctrl,
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
out_le32(&cci->slave[2].snoop_ctrl,
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
out_le32(&cci->slave[4].snoop_ctrl,
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
major = get_soc_major_rev();
if (major == SOC_MAJOR_VER_1_0) {
/*
* Set CCI-400 Slave interface S1, S2 Shareable Override
* Register All transactions are treated as non-shareable
*/
out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
/* Workaround for the issue that DDR could not respond to
* barrier transaction which is generated by executing DSB/ISB
* instruction. Set CCI-400 control override register to
* terminate the barrier transaction. After DDR is initialized,
* allow barrier transaction to DDR again */
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
}
/* Enable all the snoop signal for various masters */
out_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR |
SCFG_SNPCNFGCR_DCU_RD_WR |
SCFG_SNPCNFGCR_SATA_RD_WR |
SCFG_SNPCNFGCR_USB3_RD_WR |
SCFG_SNPCNFGCR_DBG_RD_WR |
SCFG_SNPCNFGCR_EDMA_SNP);
/*
* Memory controller require a register write before being enabled.
* Affects: DDR
* Register: EDDRTQCFG
* Description: Memory controller performance is not optimal with
* default internal target queue register values.
* Workaround: Write a value of 63b2_0042h to address: 157_020Ch.
*/
out_be32(&scfg->eddrtqcfg, 0x63b20042);
return 0;
}