mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
1a7414f626
This patch fixes the mmc tuning command failures when tuning pattern data needs to read back for comparision against the expected bit pattern. Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
700 lines
18 KiB
C
700 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2011, Marvell Semiconductor Inc.
|
|
* Lei Wen <leiwen@marvell.com>
|
|
*
|
|
* Back ported to the 8xx platform (from the 8260 platform) by
|
|
* Murray.Jensen@cmst.csiro.au, 27-Jan-01.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <sdhci.h>
|
|
|
|
#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
|
|
void *aligned_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
|
|
#else
|
|
void *aligned_buffer;
|
|
#endif
|
|
|
|
static void sdhci_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
/* Wait max 100 ms */
|
|
timeout = 100;
|
|
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
|
|
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
|
|
if (timeout == 0) {
|
|
printf("%s: Reset 0x%x never completed.\n",
|
|
__func__, (int)mask);
|
|
return;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
static void sdhci_cmd_done(struct sdhci_host *host, struct mmc_cmd *cmd)
|
|
{
|
|
int i;
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
/* CRC is stripped so we need to do some shifting. */
|
|
for (i = 0; i < 4; i++) {
|
|
cmd->response[i] = sdhci_readl(host,
|
|
SDHCI_RESPONSE + (3-i)*4) << 8;
|
|
if (i != 3)
|
|
cmd->response[i] |= sdhci_readb(host,
|
|
SDHCI_RESPONSE + (3-i)*4-1);
|
|
}
|
|
} else {
|
|
cmd->response[0] = sdhci_readl(host, SDHCI_RESPONSE);
|
|
}
|
|
}
|
|
|
|
static void sdhci_transfer_pio(struct sdhci_host *host, struct mmc_data *data)
|
|
{
|
|
int i;
|
|
char *offs;
|
|
for (i = 0; i < data->blocksize; i += 4) {
|
|
offs = data->dest + i;
|
|
if (data->flags == MMC_DATA_READ)
|
|
*(u32 *)offs = sdhci_readl(host, SDHCI_BUFFER);
|
|
else
|
|
sdhci_writel(host, *(u32 *)offs, SDHCI_BUFFER);
|
|
}
|
|
}
|
|
|
|
static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
|
|
unsigned int start_addr)
|
|
{
|
|
unsigned int stat, rdy, mask, timeout, block = 0;
|
|
bool transfer_done = false;
|
|
#ifdef CONFIG_MMC_SDHCI_SDMA
|
|
unsigned char ctrl;
|
|
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
|
|
ctrl &= ~SDHCI_CTRL_DMA_MASK;
|
|
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
|
|
#endif
|
|
|
|
timeout = 1000000;
|
|
rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL;
|
|
mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE;
|
|
do {
|
|
stat = sdhci_readl(host, SDHCI_INT_STATUS);
|
|
if (stat & SDHCI_INT_ERROR) {
|
|
pr_debug("%s: Error detected in status(0x%X)!\n",
|
|
__func__, stat);
|
|
return -EIO;
|
|
}
|
|
if (!transfer_done && (stat & rdy)) {
|
|
if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask))
|
|
continue;
|
|
sdhci_writel(host, rdy, SDHCI_INT_STATUS);
|
|
sdhci_transfer_pio(host, data);
|
|
data->dest += data->blocksize;
|
|
if (++block >= data->blocks) {
|
|
/* Keep looping until the SDHCI_INT_DATA_END is
|
|
* cleared, even if we finished sending all the
|
|
* blocks.
|
|
*/
|
|
transfer_done = true;
|
|
continue;
|
|
}
|
|
}
|
|
#ifdef CONFIG_MMC_SDHCI_SDMA
|
|
if (!transfer_done && (stat & SDHCI_INT_DMA_END)) {
|
|
sdhci_writel(host, SDHCI_INT_DMA_END, SDHCI_INT_STATUS);
|
|
start_addr &= ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1);
|
|
start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE;
|
|
sdhci_writel(host, start_addr, SDHCI_DMA_ADDRESS);
|
|
}
|
|
#endif
|
|
if (timeout-- > 0)
|
|
udelay(10);
|
|
else {
|
|
printf("%s: Transfer data timeout\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (!(stat & SDHCI_INT_DATA_END));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* No command will be sent by driver if card is busy, so driver must wait
|
|
* for card ready state.
|
|
* Every time when card is busy after timeout then (last) timeout value will be
|
|
* increased twice but only if it doesn't exceed global defined maximum.
|
|
* Each function call will use last timeout value.
|
|
*/
|
|
#define SDHCI_CMD_MAX_TIMEOUT 3200
|
|
#define SDHCI_CMD_DEFAULT_TIMEOUT 100
|
|
#define SDHCI_READ_STATUS_TIMEOUT 1000
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
static int sdhci_send_command(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
#else
|
|
static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
#endif
|
|
struct sdhci_host *host = mmc->priv;
|
|
unsigned int stat = 0;
|
|
int ret = 0;
|
|
int trans_bytes = 0, is_aligned = 1;
|
|
u32 mask, flags, mode;
|
|
unsigned int time = 0, start_addr = 0;
|
|
int mmc_dev = mmc_get_blk_desc(mmc)->devnum;
|
|
ulong start = get_timer(0);
|
|
|
|
/* Timeout unit - ms */
|
|
static unsigned int cmd_timeout = SDHCI_CMD_DEFAULT_TIMEOUT;
|
|
|
|
mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT;
|
|
|
|
/* We shouldn't wait for data inihibit for stop commands, even
|
|
though they might use busy signaling */
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION ||
|
|
((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
|
|
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) && !data))
|
|
mask &= ~SDHCI_DATA_INHIBIT;
|
|
|
|
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
|
|
if (time >= cmd_timeout) {
|
|
printf("%s: MMC: %d busy ", __func__, mmc_dev);
|
|
if (2 * cmd_timeout <= SDHCI_CMD_MAX_TIMEOUT) {
|
|
cmd_timeout += cmd_timeout;
|
|
printf("timeout increasing to: %u ms.\n",
|
|
cmd_timeout);
|
|
} else {
|
|
puts("timeout.\n");
|
|
return -ECOMM;
|
|
}
|
|
}
|
|
time++;
|
|
udelay(1000);
|
|
}
|
|
|
|
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
|
|
|
|
mask = SDHCI_INT_RESPONSE;
|
|
if ((cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
|
|
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) && !data)
|
|
mask = SDHCI_INT_DATA_AVAIL;
|
|
|
|
if (!(cmd->resp_type & MMC_RSP_PRESENT))
|
|
flags = SDHCI_CMD_RESP_NONE;
|
|
else if (cmd->resp_type & MMC_RSP_136)
|
|
flags = SDHCI_CMD_RESP_LONG;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
flags = SDHCI_CMD_RESP_SHORT_BUSY;
|
|
if (data)
|
|
mask |= SDHCI_INT_DATA_END;
|
|
} else
|
|
flags = SDHCI_CMD_RESP_SHORT;
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= SDHCI_CMD_CRC;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
flags |= SDHCI_CMD_INDEX;
|
|
if (data || cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
|
|
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
|
|
flags |= SDHCI_CMD_DATA;
|
|
|
|
/* Set Transfer mode regarding to data flag */
|
|
if (data) {
|
|
sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
|
|
mode = SDHCI_TRNS_BLK_CNT_EN;
|
|
trans_bytes = data->blocks * data->blocksize;
|
|
if (data->blocks > 1)
|
|
mode |= SDHCI_TRNS_MULTI;
|
|
|
|
if (data->flags == MMC_DATA_READ)
|
|
mode |= SDHCI_TRNS_READ;
|
|
|
|
#ifdef CONFIG_MMC_SDHCI_SDMA
|
|
if (data->flags == MMC_DATA_READ)
|
|
start_addr = (unsigned long)data->dest;
|
|
else
|
|
start_addr = (unsigned long)data->src;
|
|
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
|
|
(start_addr & 0x7) != 0x0) {
|
|
is_aligned = 0;
|
|
start_addr = (unsigned long)aligned_buffer;
|
|
if (data->flags != MMC_DATA_READ)
|
|
memcpy(aligned_buffer, data->src, trans_bytes);
|
|
}
|
|
|
|
#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
|
|
/*
|
|
* Always use this bounce-buffer when
|
|
* CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is defined
|
|
*/
|
|
is_aligned = 0;
|
|
start_addr = (unsigned long)aligned_buffer;
|
|
if (data->flags != MMC_DATA_READ)
|
|
memcpy(aligned_buffer, data->src, trans_bytes);
|
|
#endif
|
|
|
|
sdhci_writel(host, start_addr, SDHCI_DMA_ADDRESS);
|
|
mode |= SDHCI_TRNS_DMA;
|
|
#endif
|
|
sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
|
|
data->blocksize),
|
|
SDHCI_BLOCK_SIZE);
|
|
sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
|
|
sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
|
|
} else if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
|
|
}
|
|
|
|
sdhci_writel(host, cmd->cmdarg, SDHCI_ARGUMENT);
|
|
#ifdef CONFIG_MMC_SDHCI_SDMA
|
|
if (data) {
|
|
trans_bytes = ALIGN(trans_bytes, CONFIG_SYS_CACHELINE_SIZE);
|
|
flush_cache(start_addr, trans_bytes);
|
|
}
|
|
#endif
|
|
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->cmdidx, flags), SDHCI_COMMAND);
|
|
start = get_timer(0);
|
|
do {
|
|
stat = sdhci_readl(host, SDHCI_INT_STATUS);
|
|
if (stat & SDHCI_INT_ERROR)
|
|
break;
|
|
|
|
if (get_timer(start) >= SDHCI_READ_STATUS_TIMEOUT) {
|
|
if (host->quirks & SDHCI_QUIRK_BROKEN_R1B) {
|
|
return 0;
|
|
} else {
|
|
printf("%s: Timeout for status update!\n",
|
|
__func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
} while ((stat & mask) != mask);
|
|
|
|
if ((stat & (SDHCI_INT_ERROR | mask)) == mask) {
|
|
sdhci_cmd_done(host, cmd);
|
|
sdhci_writel(host, mask, SDHCI_INT_STATUS);
|
|
} else
|
|
ret = -1;
|
|
|
|
if (!ret && data)
|
|
ret = sdhci_transfer_data(host, data, start_addr);
|
|
|
|
if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD)
|
|
udelay(1000);
|
|
|
|
stat = sdhci_readl(host, SDHCI_INT_STATUS);
|
|
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
|
|
if (!ret) {
|
|
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
|
|
!is_aligned && (data->flags == MMC_DATA_READ))
|
|
memcpy(data->dest, aligned_buffer, trans_bytes);
|
|
return 0;
|
|
}
|
|
|
|
sdhci_reset(host, SDHCI_RESET_CMD);
|
|
sdhci_reset(host, SDHCI_RESET_DATA);
|
|
if (stat & SDHCI_INT_TIMEOUT)
|
|
return -ETIMEDOUT;
|
|
else
|
|
return -ECOMM;
|
|
}
|
|
|
|
#if defined(CONFIG_DM_MMC) && defined(MMC_SUPPORTS_TUNING)
|
|
static int sdhci_execute_tuning(struct udevice *dev, uint opcode)
|
|
{
|
|
int err;
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
struct sdhci_host *host = mmc->priv;
|
|
|
|
debug("%s\n", __func__);
|
|
|
|
if (host->ops && host->ops->platform_execute_tuning) {
|
|
err = host->ops->platform_execute_tuning(mmc, opcode);
|
|
if (err)
|
|
return err;
|
|
return 0;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
|
|
{
|
|
struct sdhci_host *host = mmc->priv;
|
|
unsigned int div, clk = 0, timeout;
|
|
|
|
/* Wait max 20 ms */
|
|
timeout = 200;
|
|
while (sdhci_readl(host, SDHCI_PRESENT_STATE) &
|
|
(SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)) {
|
|
if (timeout == 0) {
|
|
printf("%s: Timeout to wait cmd & data inhibit\n",
|
|
__func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
timeout--;
|
|
udelay(100);
|
|
}
|
|
|
|
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
|
|
|
|
if (clock == 0)
|
|
return 0;
|
|
|
|
if (host->ops && host->ops->set_delay)
|
|
host->ops->set_delay(host);
|
|
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
|
|
/*
|
|
* Check if the Host Controller supports Programmable Clock
|
|
* Mode.
|
|
*/
|
|
if (host->clk_mul) {
|
|
for (div = 1; div <= 1024; div++) {
|
|
if ((host->max_clk / div) <= clock)
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Set Programmable Clock Mode in the Clock
|
|
* Control register.
|
|
*/
|
|
clk = SDHCI_PROG_CLOCK_MODE;
|
|
div--;
|
|
} else {
|
|
/* Version 3.00 divisors must be a multiple of 2. */
|
|
if (host->max_clk <= clock) {
|
|
div = 1;
|
|
} else {
|
|
for (div = 2;
|
|
div < SDHCI_MAX_DIV_SPEC_300;
|
|
div += 2) {
|
|
if ((host->max_clk / div) <= clock)
|
|
break;
|
|
}
|
|
}
|
|
div >>= 1;
|
|
}
|
|
} else {
|
|
/* Version 2.00 divisors must be a power of 2. */
|
|
for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
|
|
if ((host->max_clk / div) <= clock)
|
|
break;
|
|
}
|
|
div >>= 1;
|
|
}
|
|
|
|
if (host->ops && host->ops->set_clock)
|
|
host->ops->set_clock(host, div);
|
|
|
|
clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
|
|
clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
|
|
<< SDHCI_DIVIDER_HI_SHIFT;
|
|
clk |= SDHCI_CLOCK_INT_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
|
|
/* Wait max 20 ms */
|
|
timeout = 20;
|
|
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
|
|
& SDHCI_CLOCK_INT_STABLE)) {
|
|
if (timeout == 0) {
|
|
printf("%s: Internal clock never stabilised.\n",
|
|
__func__);
|
|
return -EBUSY;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
|
|
clk |= SDHCI_CLOCK_CARD_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
return 0;
|
|
}
|
|
|
|
static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
|
|
{
|
|
u8 pwr = 0;
|
|
|
|
if (power != (unsigned short)-1) {
|
|
switch (1 << power) {
|
|
case MMC_VDD_165_195:
|
|
pwr = SDHCI_POWER_180;
|
|
break;
|
|
case MMC_VDD_29_30:
|
|
case MMC_VDD_30_31:
|
|
pwr = SDHCI_POWER_300;
|
|
break;
|
|
case MMC_VDD_32_33:
|
|
case MMC_VDD_33_34:
|
|
pwr = SDHCI_POWER_330;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (pwr == 0) {
|
|
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
|
|
return;
|
|
}
|
|
|
|
pwr |= SDHCI_POWER_ON;
|
|
|
|
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
|
|
}
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
static int sdhci_set_ios(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
#else
|
|
static int sdhci_set_ios(struct mmc *mmc)
|
|
{
|
|
#endif
|
|
u32 ctrl;
|
|
struct sdhci_host *host = mmc->priv;
|
|
|
|
if (host->ops && host->ops->set_control_reg)
|
|
host->ops->set_control_reg(host);
|
|
|
|
if (mmc->clock != host->clock)
|
|
sdhci_set_clock(mmc, mmc->clock);
|
|
|
|
if (mmc->clk_disable)
|
|
sdhci_set_clock(mmc, 0);
|
|
|
|
/* Set bus width */
|
|
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
|
|
if (mmc->bus_width == 8) {
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
|
|
(host->quirks & SDHCI_QUIRK_USE_WIDE8))
|
|
ctrl |= SDHCI_CTRL_8BITBUS;
|
|
} else {
|
|
if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
|
|
(host->quirks & SDHCI_QUIRK_USE_WIDE8))
|
|
ctrl &= ~SDHCI_CTRL_8BITBUS;
|
|
if (mmc->bus_width == 4)
|
|
ctrl |= SDHCI_CTRL_4BITBUS;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
}
|
|
|
|
if (mmc->clock > 26000000)
|
|
ctrl |= SDHCI_CTRL_HISPD;
|
|
else
|
|
ctrl &= ~SDHCI_CTRL_HISPD;
|
|
|
|
if ((host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) ||
|
|
(host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE))
|
|
ctrl &= ~SDHCI_CTRL_HISPD;
|
|
|
|
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
|
|
|
|
/* If available, call the driver specific "post" set_ios() function */
|
|
if (host->ops && host->ops->set_ios_post)
|
|
host->ops->set_ios_post(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdhci_init(struct mmc *mmc)
|
|
{
|
|
struct sdhci_host *host = mmc->priv;
|
|
|
|
sdhci_reset(host, SDHCI_RESET_ALL);
|
|
|
|
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
|
|
aligned_buffer = memalign(8, 512*1024);
|
|
if (!aligned_buffer) {
|
|
printf("%s: Aligned buffer alloc failed!!!\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
|
|
|
|
if (host->ops && host->ops->get_cd)
|
|
host->ops->get_cd(host);
|
|
|
|
/* Enable only interrupts served by the SD controller */
|
|
sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
|
|
SDHCI_INT_ENABLE);
|
|
/* Mask all sdhci interrupt sources */
|
|
sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
int sdhci_probe(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
return sdhci_init(mmc);
|
|
}
|
|
|
|
const struct dm_mmc_ops sdhci_ops = {
|
|
.send_cmd = sdhci_send_command,
|
|
.set_ios = sdhci_set_ios,
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
.execute_tuning = sdhci_execute_tuning,
|
|
#endif
|
|
};
|
|
#else
|
|
static const struct mmc_ops sdhci_ops = {
|
|
.send_cmd = sdhci_send_command,
|
|
.set_ios = sdhci_set_ios,
|
|
.init = sdhci_init,
|
|
};
|
|
#endif
|
|
|
|
int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
|
|
u32 f_max, u32 f_min)
|
|
{
|
|
u32 caps, caps_1 = 0;
|
|
|
|
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
|
|
|
|
#ifdef CONFIG_MMC_SDHCI_SDMA
|
|
if (!(caps & SDHCI_CAN_DO_SDMA)) {
|
|
printf("%s: Your controller doesn't support SDMA!!\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
if (host->quirks & SDHCI_QUIRK_REG32_RW)
|
|
host->version =
|
|
sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
|
|
else
|
|
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
|
|
|
|
cfg->name = host->name;
|
|
#ifndef CONFIG_DM_MMC
|
|
cfg->ops = &sdhci_ops;
|
|
#endif
|
|
|
|
/* Check whether the clock multiplier is supported or not */
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
|
|
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
|
|
host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
|
|
SDHCI_CLOCK_MUL_SHIFT;
|
|
}
|
|
|
|
if (host->max_clk == 0) {
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
|
|
host->max_clk = (caps & SDHCI_CLOCK_V3_BASE_MASK) >>
|
|
SDHCI_CLOCK_BASE_SHIFT;
|
|
else
|
|
host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >>
|
|
SDHCI_CLOCK_BASE_SHIFT;
|
|
host->max_clk *= 1000000;
|
|
if (host->clk_mul)
|
|
host->max_clk *= host->clk_mul;
|
|
}
|
|
if (host->max_clk == 0) {
|
|
printf("%s: Hardware doesn't specify base clock frequency\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
if (f_max && (f_max < host->max_clk))
|
|
cfg->f_max = f_max;
|
|
else
|
|
cfg->f_max = host->max_clk;
|
|
if (f_min)
|
|
cfg->f_min = f_min;
|
|
else {
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
|
|
cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_300;
|
|
else
|
|
cfg->f_min = cfg->f_max / SDHCI_MAX_DIV_SPEC_200;
|
|
}
|
|
cfg->voltages = 0;
|
|
if (caps & SDHCI_CAN_VDD_330)
|
|
cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
if (caps & SDHCI_CAN_VDD_300)
|
|
cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
|
|
if (caps & SDHCI_CAN_VDD_180)
|
|
cfg->voltages |= MMC_VDD_165_195;
|
|
|
|
if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
|
|
cfg->voltages |= host->voltages;
|
|
|
|
cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
|
|
|
|
/* Since Host Controller Version3.0 */
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
|
|
if (!(caps & SDHCI_CAN_DO_8BIT))
|
|
cfg->host_caps &= ~MMC_MODE_8BIT;
|
|
}
|
|
|
|
if (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE) {
|
|
cfg->host_caps &= ~MMC_MODE_HS;
|
|
cfg->host_caps &= ~MMC_MODE_HS_52MHz;
|
|
}
|
|
|
|
if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
|
|
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
|
|
|
|
if (!(cfg->voltages & MMC_VDD_165_195) ||
|
|
(host->quirks & SDHCI_QUIRK_NO_1_8_V))
|
|
caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
|
|
SDHCI_SUPPORT_DDR50);
|
|
|
|
if (caps_1 & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
|
|
SDHCI_SUPPORT_DDR50))
|
|
cfg->host_caps |= MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25);
|
|
|
|
if (caps_1 & SDHCI_SUPPORT_SDR104) {
|
|
cfg->host_caps |= MMC_CAP(UHS_SDR104) | MMC_CAP(UHS_SDR50);
|
|
/*
|
|
* SD3.0: SDR104 is supported so (for eMMC) the caps2
|
|
* field can be promoted to support HS200.
|
|
*/
|
|
cfg->host_caps |= MMC_CAP(MMC_HS_200);
|
|
} else if (caps_1 & SDHCI_SUPPORT_SDR50) {
|
|
cfg->host_caps |= MMC_CAP(UHS_SDR50);
|
|
}
|
|
|
|
if (caps_1 & SDHCI_SUPPORT_DDR50)
|
|
cfg->host_caps |= MMC_CAP(UHS_DDR50);
|
|
|
|
if (host->host_caps)
|
|
cfg->host_caps |= host->host_caps;
|
|
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BLK
|
|
int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg)
|
|
{
|
|
return mmc_bind(dev, mmc, cfg);
|
|
}
|
|
#else
|
|
int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min)
|
|
{
|
|
int ret;
|
|
|
|
ret = sdhci_setup_cfg(&host->cfg, host, f_max, f_min);
|
|
if (ret)
|
|
return ret;
|
|
|
|
host->mmc = mmc_create(&host->cfg, host);
|
|
if (host->mmc == NULL) {
|
|
printf("%s: mmc create fail!\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|