u-boot/board/xes/xpedite1000/xpedite1000.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

184 lines
5 KiB
C

/*
* Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <spd_sdram.h>
#include <i2c.h>
#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
unsigned long sdrreg;
/*
* Enable GPIO for pins 18 - 24
* 18 = SEEPROM_WP
* 19 = #M_RST
* 20 = #MONARCH
* 21 = #LED_ALARM
* 22 = #LED_ACT
* 23 = #LED_STATUS1
* 24 = #LED_STATUS2
*/
mfsdr(SDR0_PFC0, sdrreg);
mtsdr(SDR0_PFC0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00);
out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
LED0_OFF();
LED1_OFF();
LED2_OFF();
LED3_OFF();
/* Setup the external bus controller/chip selects */
mtebc(PB0AP, 0x04055200); /* 16MB Strata FLASH */
mtebc(PB0CR, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */
mtebc(PB1AP, 0x04055200); /* 512KB Socketed AMD FLASH */
mtebc(PB1CR, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */
mtebc(PB6AP, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */
mtebc(PB6CR, 0xf00da000); /* BAS=0xf00 64MB R/W i6-bit */
mtebc(PB7AP, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */
mtebc(PB7CR, 0xf40da000); /* BAS=0xf40 64MB R/W 16-bit */
/*
* Setup the interrupt controller polarities, triggers, etc.
*
* Because of the interrupt handling rework to handle 440GX interrupts
* with the common code, we needed to change names of the UIC registers.
* Here the new relationship:
*
* U-Boot name 440GX name
* -----------------------
* UIC0 UICB0
* UIC1 UIC0
* UIC2 UIC1
* UIC3 UIC2
*/
mtdcr(UIC1SR, 0xffffffff); /* clear all */
mtdcr(UIC1ER, 0x00000000); /* disable all */
mtdcr(UIC1CR, 0x00000003); /* SMI & UIC1 crit are critical */
mtdcr(UIC1PR, 0xfffffe00); /* per ref-board manual */
mtdcr(UIC1TR, 0x01c00000); /* per ref-board manual */
mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
mtdcr(UIC1SR, 0xffffffff); /* clear all */
mtdcr(UIC2SR, 0xffffffff); /* clear all */
mtdcr(UIC2ER, 0x00000000); /* disable all */
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
mtdcr(UIC2PR, 0xffffc0ff); /* per ref-board manual */
mtdcr(UIC2TR, 0x00ff8000); /* per ref-board manual */
mtdcr(UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
mtdcr(UIC2SR, 0xffffffff); /* clear all */
mtdcr(UIC3SR, 0xffffffff); /* clear all */
mtdcr(UIC3ER, 0x00000000); /* disable all */
mtdcr(UIC3CR, 0x00000000); /* all non-critical */
mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
mtdcr(UIC3TR, 0x00ff8c0f); /* per ref-board manual */
mtdcr(UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
mtdcr(UIC3SR, 0xffffffff); /* clear all */
mtdcr(UIC0SR, 0xfc000000); /* clear all */
mtdcr(UIC0ER, 0x00000000); /* disable all */
mtdcr(UIC0CR, 0x00000000); /* all non-critical */
mtdcr(UIC0PR, 0xfc000000); /* */
mtdcr(UIC0TR, 0x00000000); /* */
mtdcr(UIC0VR, 0x00000001); /* */
LED0_ON();
return 0;
}
int checkboard(void)
{
char buf[64];
int i;
printf("Board: X-ES %s PMC SBC\n", CONFIG_SYS_BOARD_NAME);
printf(" ");
i = getenv_f("board_rev", buf, sizeof(buf));
if (i > 0)
printf("Rev %s, ", buf);
i = getenv_f("serial#", buf, sizeof(buf));
if (i > 0)
printf("Serial# %s, ", buf);
i = getenv_f("board_cfg", buf, sizeof(buf));
if (i > 0)
printf("Cfg %s", buf);
printf("\n");
return 0;
}
phys_size_t initdram(int board_type)
{
return spd_sdram();
}
/*
* Override weak pci_pre_init()
*
* This routine is called just prior to registering the hose and gives
* the board the opportunity to check things. Returning a value of zero
* indicates that things are bad & PCI initialization should be aborted.
*
* Different boards may wish to customize the pci controller structure
* (add regions, override default access routines, etc) or perform
* certain pre-initialization actions.
*/
#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller * hose)
{
unsigned long strap;
/* See if we're supposed to setup the pci */
mfsdr(SDR0_SDSTP1, strap);
if ((strap & 0x00010000) == 0)
return 0;
#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
/* Setup System Device Register PCIL0_XCR */
mfsdr(SDR0_XCR, strap);
strap &= 0x0f000000;
mtsdr(SDR0_XCR, strap);
#endif
return 1;
}
#endif /* defined(CONFIG_PCI) */
#if defined(CONFIG_PCI)
/*
* Override weak is_pci_host()
*
* This routine is called to determine if a pci scan should be
* performed. With various hardware environments (especially cPCI and
* PPMC) it's insufficient to depend on the state of the arbiter enable
* bit in the strap register, or generic host/adapter assumptions.
*
* Rather than hard-code a bad assumption in the general 440 code, the
* 440 pci code requires the board to decide at runtime.
*
* Return 0 for adapter mode, non-zero for host (monarch) mode.
*/
int is_pci_host(struct pci_controller *hose)
{
return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
}
#endif /* defined(CONFIG_PCI) */
#ifdef CONFIG_POST
/*
* Returns 1 if keys pressed to start the power-on long-running tests
* Called from board_init_f().
*/
int post_hotkeys_pressed(void)
{
return ctrlc();
}
#endif