mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
ee1363f2da
This is an error in my side in the initial submission: nobody calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
340 lines
6.8 KiB
ArmAsm
340 lines
6.8 KiB
ArmAsm
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2005
|
|
* STMicrolelctronics, <www.st.com>
|
|
*
|
|
* (C) Copyright 2004, ARM Ltd.
|
|
* Philippe Robin, <philippe.robin@arm.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
/* Jump to the flash address */
|
|
ldr r0, =CFG_ONENAND_BASE
|
|
|
|
/*
|
|
* Make it independent whether we boot from 0x0 or 0x30000000.
|
|
* Non-portable: it relies on the knowledge that ip has to be updated
|
|
*/
|
|
orr ip, ip, r0 /* adjust return address of cpu_init_crit */
|
|
orr lr, lr, r0 /* adjust return address */
|
|
orr pc, pc, r0 /* jump to the normal address */
|
|
nop
|
|
|
|
/* Initialize PLL, Remap clear, FSMC, MPMC here! */
|
|
/* What about GPIO, CLCD and UART */
|
|
|
|
/* PLL Initialization */
|
|
/* Prog the PLL1 @ 266 MHz ==> SDRAM Clock = 100.8 MHz */
|
|
ldr r0, =NOMADIK_SRC_BASE
|
|
|
|
ldr r1, =0x2B013502
|
|
|
|
str r1, [r0, #0x14]
|
|
|
|
/* Used to set all the timers clock to 2.4MHZ */
|
|
ldr r1, =0x2AAAA004
|
|
str r1, [r0]
|
|
|
|
ldr r1, =0x10000000
|
|
str r1, [r0, #0x10]
|
|
|
|
/* FSMC setup ---- */
|
|
ldr r0, =NOMADIK_FSMC_BASE
|
|
|
|
ldr r1, =0x10DB /* For 16-bit NOR flash */
|
|
str r1, [r0, #0x08]
|
|
|
|
ldr r1, =0x03333333 /* For 16-bit NOR flash */
|
|
str r1, [r0, #0xc]
|
|
|
|
/* oneNAND setting */
|
|
ldr r1, =0x0000105B /* BCR0 Prog control register */
|
|
str r1, [r0]
|
|
|
|
ldr r1, =0x0A200551 /* BTR0 Prog timing register */
|
|
str r1, [r0, #0x04]
|
|
|
|
/* preload the instructions into icache */
|
|
add r0, pc, #0x1F
|
|
bic r0, r0, #0x1F
|
|
mcr p15, 0, r0, c7, c13, 1
|
|
add r0, r0, #0x20
|
|
mcr p15, 0, r0, c7, c13, 1
|
|
|
|
/* Now Clear Remap */
|
|
ldr r0, =NOMADIK_SRC_BASE
|
|
|
|
ldr r1, =0x2004
|
|
str r1, [r0]
|
|
|
|
ldr r1, =0x10000000
|
|
str r1, [r0, #0x10]
|
|
|
|
ldr r0, =0x101E9000
|
|
ldr r1, =0x2004
|
|
str r1, [r0]
|
|
|
|
ldr r0, =NOMADIK_SRC_BASE
|
|
ldr r1, =0x2104
|
|
str r1, [r0]
|
|
|
|
/* FSMC setup -- */
|
|
mov r0, #(NOMADIK_FSMC_BASE & 0x10000000)
|
|
orr r0, r0, #(NOMADIK_FSMC_BASE & 0x0FFFFFFF)
|
|
|
|
ldr r1, =0x10DB /* For 16-bit NOR flash */
|
|
str r1, [r0, #0x8]
|
|
|
|
ldr r1, =0x03333333 /* For 16-bit NOR flash */
|
|
str r1, [r0, #0xc]
|
|
|
|
/* MPMC Setup */
|
|
ldr r0, =NOMADIK_MPMC_BASE
|
|
|
|
ldr r1, =0xF00003
|
|
str r1, [r0] /* Enable the MPMC and the DLL */
|
|
|
|
ldr r1, =0x183
|
|
str r1, [r0, #0x20]
|
|
|
|
ldr r2, =NOMADIK_PMU_BASE
|
|
|
|
ldr r1, =0x1111
|
|
str r1, [r2]
|
|
|
|
ldr r1, =0x1111 /* Prog the, mand delay strategy */
|
|
str r1, [r0, #0x28]
|
|
|
|
ldr r1, =0x103 /* NOP ,mand */
|
|
str r1, [r0, #0x20]
|
|
|
|
/* FIXME -- Wait required here */
|
|
|
|
ldr r1, =0x103 /* PALL ,mand*/
|
|
str r1, [r0, #0x20]
|
|
|
|
ldr r1, =0x1
|
|
str r1, [r0, #0x24] /* To do at least two auto-refresh */
|
|
|
|
/* FIXME -- Wait required here */
|
|
|
|
/* Auto-refresh period = 7.8us @ SDRAM Clock = 100.8 MHz */
|
|
ldr r1, =0x31
|
|
str r1, [r0, #0x24]
|
|
|
|
/* Prog Little Endian, Not defined in 8800 board */
|
|
ldr r1, =0x0
|
|
str r1, [r0, #0x8]
|
|
|
|
|
|
ldr r1, =0x2
|
|
str r1, [r0, #0x30] /* Prog tRP timing */
|
|
|
|
ldr r1, =0x4 /* Change for 8815 */
|
|
str r1, [r0, #0x34] /* Prog tRAS timing */
|
|
|
|
ldr r1, =0xB
|
|
str r1, [r0, #0x38] /* Prog tSREX timing */
|
|
|
|
|
|
ldr r1, =0x1
|
|
str r1, [r0, #0x44] /* Prog tWR timing */
|
|
|
|
ldr r1, =0x8
|
|
str r1, [r0, #0x48] /* Prog tRC timing */
|
|
|
|
ldr r1, =0xA
|
|
str r1, [r0, #0x4C] /* Prog tRFC timing */
|
|
|
|
ldr r1, =0xB
|
|
str r1, [r0, #0x50] /* Prog tXSR timing */
|
|
|
|
ldr r1, =0x1
|
|
str r1, [r0, #0x54] /* Prog tRRD timing */
|
|
|
|
ldr r1, =0x1
|
|
str r1, [r0, #0x58] /* Prog tMRD timing */
|
|
|
|
ldr r1, =0x1
|
|
str r1, [r0, #0x5C] /* Prog tCDLR timing */
|
|
|
|
/* DDR-SDRAM MEMORY IS ON BANK0 8815 */
|
|
ldr r1, =0x304 /* Prog RAS and CAS for CS 0 */
|
|
str r1, [r0, #0x104]
|
|
|
|
/* SDR-SDRAM MEMORY IS ON BANK1 8815 */
|
|
ldr r1, =0x304 /* Prog RAS and CAS for CS 1 */
|
|
str r1, [r0, #0x124]
|
|
/* THE DATA BUS WIDE IS PROGRAM FOR 16-BITS */
|
|
/* DDR-SDRAM MEMORY IS ON BANK0*/
|
|
|
|
ldr r1, =0x884 /* 8815 : config reg in BRC for CS0 */
|
|
str r1, [r0, #0x100]
|
|
|
|
/*SDR-SDRAM MEMORY IS ON BANK1*/
|
|
|
|
ldr r1, =0x884 /* 8815 : config reg in BRC for CS1 */
|
|
str r1, [r0, #0x120]
|
|
|
|
ldr r1, =0x83 /*MODE Mand*/
|
|
str r1, [r0, #0x20]
|
|
|
|
/* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK0 */
|
|
|
|
ldr r1, =0x62000 /*Data in*/
|
|
ldr r1, [r1]
|
|
|
|
/* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK1 */
|
|
|
|
ldr r1, =0x8062000
|
|
ldr r1, [r1]
|
|
|
|
ldr r1, =0x003
|
|
str r1, [r0, #0x20]
|
|
|
|
/* ENABLE ALL THE BUFFER FOR EACH AHB PORT*/
|
|
|
|
ldr r1, =0x01 /* Enable buffer 0 */
|
|
str r1, [r0, #0x400]
|
|
|
|
ldr r1, =0x01 /* Enable buffer 1 */
|
|
str r1, [r0, #0x420]
|
|
|
|
ldr r1, =0x01 /* Enable buffer 2 */
|
|
str r1, [r0, #0x440]
|
|
|
|
ldr r1, =0x01 /* Enable buffer 3 */
|
|
str r1, [r0, #0x460]
|
|
|
|
ldr r1, =0x01 /* Enable buffer 4 */
|
|
str r1, [r0, #0x480]
|
|
|
|
ldr r1, =0x01 /* Enable buffer 5 */
|
|
str r1, [r0, #0x4A0]
|
|
|
|
/* GPIO settings */
|
|
|
|
ldr r0, =NOMADIK_GPIO1_BASE
|
|
|
|
ldr r1, =0xC0600000
|
|
str r1, [r0, #0x20]
|
|
|
|
ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */
|
|
str r1, [r0, #0x24]
|
|
|
|
ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */
|
|
str r1, [r0, #0x28]
|
|
|
|
ldr r0, =NOMADIK_GPIO0_BASE
|
|
|
|
ldr r1, =0xFFFFFFFF
|
|
str r1, [r0, #0x20]
|
|
|
|
ldr r1, =0x00
|
|
str r1, [r0, #0x24]
|
|
|
|
ldr r1, =0x00
|
|
str r1, [r0, #0x28]
|
|
|
|
/* Configure CPLD_CTRL register for enabling MUX logic for UART0/UART2 */
|
|
|
|
ldr r0, =NOMADIK_FSMC_BASE
|
|
|
|
ldr r1, =0x10DB /* INIT FSMC bank 0 */
|
|
str r1, [r0, #0x00]
|
|
|
|
ldr r1, =0x0FFFFFFF
|
|
str r1, [r0, #0x04]
|
|
|
|
ldr r1, =0x010DB /* INIT FSMC bank 1 */
|
|
str r1, [r0, #0x08]
|
|
|
|
ldr r1, =0x00FFFFFFF
|
|
str r1, [r0, #0x0C]
|
|
|
|
ldr r0, =NOMADIK_UART0_BASE
|
|
|
|
ldr r1, =0x00000000
|
|
str r1, [r0, #0x30]
|
|
|
|
ldr r1, =0x0000004e
|
|
str r1, [r0, #0x24]
|
|
|
|
ldr r1, =0x00000008
|
|
str r1, [r0, #0x28]
|
|
|
|
ldr r1, =0x00000060
|
|
str r1, [r0, #0x2C]
|
|
|
|
ldr r1, =0x00000301
|
|
str r1, [r0, #0x30]
|
|
|
|
ldr r1, =0x00000066
|
|
str r1, [r0]
|
|
|
|
ldr r0, =NOMADIK_UART1_BASE
|
|
|
|
ldr r1, =0x00000000
|
|
str r1, [r0, #0x30]
|
|
|
|
ldr r1, =0x0000004e
|
|
str r1, [r0, #0x24]
|
|
|
|
ldr r1, =0x00000008
|
|
str r1, [r0, #0x28]
|
|
|
|
ldr r1, =0x00000060
|
|
str r1, [r0, #0x2C]
|
|
|
|
ldr r1, =0x00000301
|
|
str r1, [r0, #0x30]
|
|
|
|
ldr r1, =0x00000066
|
|
str r1, [r0]
|
|
|
|
ldr r0, =NOMADIK_UART2_BASE
|
|
|
|
ldr r1, =0x00000000
|
|
str r1, [r0, #0x30]
|
|
|
|
ldr r1, =0x0000004e
|
|
str r1, [r0, #0x24]
|
|
|
|
ldr r1, =0x00000008
|
|
str r1, [r0, #0x28]
|
|
|
|
ldr r1, =0x00000060
|
|
str r1, [r0, #0x2C]
|
|
|
|
ldr r1, =0x00000301
|
|
str r1, [r0, #0x30]
|
|
|
|
ldr r1, =0x00000066
|
|
str r1, [r0]
|
|
|
|
/* Configure CPLD to enable UART0 */
|
|
|
|
mov pc, lr
|