mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
c2120fbfbc
The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
350 lines
9.5 KiB
C
350 lines
9.5 KiB
C
/*
|
|
*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004-2008, 2012 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <asm/immap.h>
|
|
#include <asm/io.h>
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
#include <config.h>
|
|
#include <net.h>
|
|
#include <asm/fec.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_MCF5301x
|
|
void cpu_init_f(void)
|
|
{
|
|
scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
|
|
|
|
out_be32(&scm1->mpr, 0x77777777);
|
|
out_be32(&scm1->pacra, 0);
|
|
out_be32(&scm1->pacrb, 0);
|
|
out_be32(&scm1->pacrc, 0);
|
|
out_be32(&scm1->pacrd, 0);
|
|
out_be32(&scm1->pacre, 0);
|
|
out_be32(&scm1->pacrf, 0);
|
|
out_be32(&scm1->pacrg, 0);
|
|
|
|
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
|
|
&& defined(CONFIG_SYS_CS0_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS0_CS0);
|
|
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
|
|
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
|
|
out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
|
|
&& defined(CONFIG_SYS_CS1_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS1_CS1);
|
|
out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
|
|
out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
|
|
out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
|
|
&& defined(CONFIG_SYS_CS2_CTRL))
|
|
out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
|
|
out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
|
|
out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
|
|
&& defined(CONFIG_SYS_CS3_CTRL))
|
|
out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
|
|
out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
|
|
out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
|
|
&& defined(CONFIG_SYS_CS4_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS4);
|
|
out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
|
|
out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
|
|
out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
|
|
&& defined(CONFIG_SYS_CS5_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS5);
|
|
out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
|
|
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
|
|
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_FSL
|
|
out_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_SDA_SDA | GPIO_PAR_FECI2C_SCL_SCL);
|
|
#endif
|
|
|
|
icache_enable();
|
|
}
|
|
|
|
/* initialize higher level parts of CPU like timers */
|
|
int cpu_init_r(void)
|
|
{
|
|
#ifdef CONFIG_MCFFEC
|
|
ccm_t *ccm = (ccm_t *) MMAP_CCM;
|
|
#endif
|
|
#ifdef CONFIG_MCFRTC
|
|
rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
|
|
rtcex_t *rtcex = (rtcex_t *) &rtc->extended;
|
|
|
|
out_be32(&rtcex->gocu, CONFIG_SYS_RTC_CNT);
|
|
out_be32(&rtcex->gocl, CONFIG_SYS_RTC_SETUP);
|
|
|
|
#endif
|
|
#ifdef CONFIG_MCFFEC
|
|
if (CONFIG_SYS_FEC0_MIIBASE != CONFIG_SYS_FEC1_MIIBASE)
|
|
setbits_be16(&ccm->misccr, CCM_MISCCR_FECM);
|
|
else
|
|
clrbits_be16(&ccm->misccr, CCM_MISCCR_FECM);
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
void uart_port_conf(int port)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
/* Setup Ports: */
|
|
switch (port) {
|
|
case 0:
|
|
clrbits_8(&gpio->par_uart,
|
|
GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
|
|
setbits_8(&gpio->par_uart,
|
|
GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
|
|
break;
|
|
case 1:
|
|
#ifdef CONFIG_SYS_UART1_ALT1_GPIO
|
|
clrbits_8(&gpio->par_simp1h,
|
|
GPIO_PAR_SIMP1H_DATA1_UNMASK |
|
|
GPIO_PAR_SIMP1H_VEN1_UNMASK);
|
|
setbits_8(&gpio->par_simp1h,
|
|
GPIO_PAR_SIMP1H_DATA1_U1TXD |
|
|
GPIO_PAR_SIMP1H_VEN1_U1RXD);
|
|
#elif defined(CONFIG_SYS_UART1_ALT2_GPIO)
|
|
clrbits_8(&gpio->par_ssih,
|
|
GPIO_PAR_SSIH_RXD_UNMASK |
|
|
GPIO_PAR_SSIH_TXD_UNMASK);
|
|
setbits_8(&gpio->par_ssih,
|
|
GPIO_PAR_SSIH_RXD_U1RXD |
|
|
GPIO_PAR_SSIH_TXD_U1TXD);
|
|
#endif
|
|
break;
|
|
case 2:
|
|
#ifdef CONFIG_SYS_UART2_PRI_GPIO
|
|
setbits_8(&gpio->par_uart,
|
|
GPIO_PAR_UART_U2TXD |
|
|
GPIO_PAR_UART_U2RXD);
|
|
#elif defined(CONFIG_SYS_UART2_ALT1_GPIO)
|
|
clrbits_8(&gpio->par_dspih,
|
|
GPIO_PAR_DSPIH_SIN_UNMASK |
|
|
GPIO_PAR_DSPIH_SOUT_UNMASK);
|
|
setbits_8(&gpio->par_dspih,
|
|
GPIO_PAR_DSPIH_SIN_U2RXD |
|
|
GPIO_PAR_DSPIH_SOUT_U2TXD);
|
|
#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
|
|
clrbits_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_SDA_UNMASK |
|
|
GPIO_PAR_FECI2C_SCL_UNMASK);
|
|
setbits_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_SDA_U2TXD |
|
|
GPIO_PAR_FECI2C_SCL_U2RXD);
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
int fecpin_setclear(struct eth_device *dev, int setclear)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
struct fec_info_s *info = (struct fec_info_s *)dev->priv;
|
|
|
|
if (setclear) {
|
|
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
|
|
setbits_8(&gpio->par_fec,
|
|
GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC);
|
|
setbits_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_MDC0 | GPIO_PAR_FECI2C_MDIO0);
|
|
} else {
|
|
setbits_8(&gpio->par_fec,
|
|
GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC);
|
|
setbits_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_MDC1 | GPIO_PAR_FECI2C_MDIO1);
|
|
}
|
|
} else {
|
|
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
|
|
clrbits_8(&gpio->par_fec,
|
|
GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC);
|
|
clrbits_8(&gpio->par_feci2c, ~GPIO_PAR_FECI2C_RMII0_UNMASK);
|
|
} else {
|
|
clrbits_8(&gpio->par_fec,
|
|
GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC);
|
|
clrbits_8(&gpio->par_feci2c, ~GPIO_PAR_FECI2C_RMII1_UNMASK);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_CMD_NET */
|
|
#endif /* CONFIG_MCF5301x */
|
|
|
|
#ifdef CONFIG_MCF532x
|
|
void cpu_init_f(void)
|
|
{
|
|
scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
|
|
scm2_t *scm2 = (scm2_t *) MMAP_SCM2;
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
|
|
wdog_t *wdog = (wdog_t *) MMAP_WDOG;
|
|
|
|
/* watchdog is enabled by default - disable the watchdog */
|
|
#ifndef CONFIG_WATCHDOG
|
|
out_be16(&wdog->cr, 0);
|
|
#endif
|
|
|
|
out_be32(&scm1->mpr0, 0x77777777);
|
|
out_be32(&scm2->pacra, 0);
|
|
out_be32(&scm2->pacrb, 0);
|
|
out_be32(&scm2->pacrc, 0);
|
|
out_be32(&scm2->pacrd, 0);
|
|
out_be32(&scm2->pacre, 0);
|
|
out_be32(&scm2->pacrf, 0);
|
|
out_be32(&scm2->pacrg, 0);
|
|
out_be32(&scm1->pacrh, 0);
|
|
|
|
/* Port configuration */
|
|
out_8(&gpio->par_cs, 0);
|
|
|
|
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
|
|
&& defined(CONFIG_SYS_CS0_CTRL))
|
|
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
|
|
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
|
|
out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
|
|
&& defined(CONFIG_SYS_CS1_CTRL))
|
|
/* Latch chipselect */
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS1);
|
|
out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
|
|
out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
|
|
out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
|
|
&& defined(CONFIG_SYS_CS2_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS2);
|
|
out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
|
|
out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
|
|
out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
|
|
&& defined(CONFIG_SYS_CS3_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS3);
|
|
out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
|
|
out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
|
|
out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
|
|
&& defined(CONFIG_SYS_CS4_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS4);
|
|
out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
|
|
out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
|
|
out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
|
|
&& defined(CONFIG_SYS_CS5_CTRL))
|
|
setbits_8(&gpio->par_cs, GPIO_PAR_CS5);
|
|
out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
|
|
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
|
|
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_FSL
|
|
out_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
|
|
#endif
|
|
|
|
icache_enable();
|
|
}
|
|
|
|
/*
|
|
* initialize higher level parts of CPU like timers
|
|
*/
|
|
int cpu_init_r(void)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
void uart_port_conf(int port)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
/* Setup Ports: */
|
|
switch (port) {
|
|
case 0:
|
|
clrbits_be16(&gpio->par_uart,
|
|
GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
|
|
setbits_be16(&gpio->par_uart,
|
|
GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
|
|
break;
|
|
case 1:
|
|
clrbits_be16(&gpio->par_uart,
|
|
GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
|
|
setbits_be16(&gpio->par_uart,
|
|
GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
|
|
break;
|
|
case 2:
|
|
#ifdef CONFIG_SYS_UART2_ALT1_GPIO
|
|
clrbits_8(&gpio->par_timer, 0xf0);
|
|
setbits_8(&gpio->par_timer,
|
|
GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
|
|
#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
|
|
clrbits_8(&gpio->par_feci2c, 0x00ff);
|
|
setbits_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_SCL_UTXD2 | GPIO_PAR_FECI2C_SDA_URXD2);
|
|
#elif defined(CONFIG_SYS_UART2_ALT3_GPIO)
|
|
clrbits_be16(&gpio->par_ssi, 0x0f00);
|
|
setbits_be16(&gpio->par_ssi,
|
|
GPIO_PAR_SSI_RXD(2) | GPIO_PAR_SSI_TXD(2));
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
int fecpin_setclear(struct eth_device *dev, int setclear)
|
|
{
|
|
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
if (setclear) {
|
|
setbits_8(&gpio->par_fec,
|
|
GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
|
|
setbits_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
|
|
} else {
|
|
clrbits_8(&gpio->par_fec,
|
|
GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
|
|
clrbits_8(&gpio->par_feci2c,
|
|
GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
#endif /* CONFIG_MCF532x */
|