mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
822556a934
Sync the rk3399 DTs and associated bits from 5.14-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> (Remove the conflict content for vmarc-som) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
837 lines
16 KiB
Text
837 lines
16 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
|
|
* (https://www.khadas.com)
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include "rk3399.dtsi"
|
|
#include "rk3399-opp.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
mmc0 = &sdio0;
|
|
mmc1 = &sdmmc;
|
|
mmc2 = &sdhci;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
clkin_gmac: external-gmac-clock {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "clkin_gmac";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk808 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/* switched by pmic_sleep */
|
|
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v8_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pcie";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vsys_3v3>;
|
|
};
|
|
|
|
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
|
vcc5v0_host: vcc5v0-host-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-always-on;
|
|
vin-supply = <&vsys_5v0>;
|
|
};
|
|
|
|
vdd_log: vdd-log {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm2 0 25000 1>;
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
vin-supply = <&vsys_3v3>;
|
|
};
|
|
|
|
vsys: vsys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vsys_3v3: vsys-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys_3v3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vsys>;
|
|
};
|
|
|
|
vsys_5v0: vsys-5v0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys_5v0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vsys>;
|
|
};
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
recovery {
|
|
label = "Recovery";
|
|
linux,code = <KEY_VENDOR>;
|
|
press-threshold-microvolt = <18000>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwrbtn>;
|
|
|
|
power {
|
|
debounce-interval = <100>;
|
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
label = "GPIO Key Power";
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
ir-receiver {
|
|
compatible = "gpio-ir-receiver";
|
|
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
|
|
linux,rc-map-name = "rc-khadas";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir_rx>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
|
|
|
|
sys_led: led-0 {
|
|
label = "sys_led";
|
|
linux,default-trigger = "heartbeat";
|
|
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
user_led: led-1 {
|
|
label = "user_led";
|
|
default-state = "off";
|
|
gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
fan: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
cooling-levels = <0 150 200 255>;
|
|
#cooling-cells = <2>;
|
|
fan-supply = <&vsys_5v0>;
|
|
pwms = <&pwm0 0 40000 0>;
|
|
};
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_b>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_b>;
|
|
};
|
|
|
|
&cpu_thermal {
|
|
trips {
|
|
cpu_warm: cpu_warm {
|
|
temperature = <55000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
|
|
cpu_hot: cpu_hot {
|
|
temperature = <65000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map2 {
|
|
trip = <&cpu_warm>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
|
};
|
|
|
|
map3 {
|
|
trip = <&cpu_hot>;
|
|
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&emmc_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
|
assigned-clock-parents = <&clkin_gmac>;
|
|
clock_in_out = "input";
|
|
phy-supply = <&vcc_lan>;
|
|
phy-mode = "rgmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 50000>;
|
|
tx_delay = <0x28>;
|
|
rx_delay = <0x11>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu_thermal {
|
|
trips {
|
|
gpu_warm: gpu_warm {
|
|
temperature = <55000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
|
|
gpu_hot: gpu_hot {
|
|
temperature = <65000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map1 {
|
|
trip = <&gpu_warm>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
|
};
|
|
|
|
map2 {
|
|
trip = <&gpu_hot>;
|
|
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_cec>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
i2c-scl-rising-time-ns = <450>;
|
|
i2c-scl-falling-time-ns = <15>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
clock-frequency = <400000>;
|
|
i2c-scl-rising-time-ns = <168>;
|
|
i2c-scl-falling-time-ns = <4>;
|
|
status = "okay";
|
|
|
|
rk808: pmic@1b {
|
|
compatible = "rockchip,rk808";
|
|
reg = <0x1b>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "xin32k", "rk808-clkout2";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
|
|
vcc1-supply = <&vsys_3v3>;
|
|
vcc2-supply = <&vsys_3v3>;
|
|
vcc3-supply = <&vsys_3v3>;
|
|
vcc4-supply = <&vsys_3v3>;
|
|
vcc6-supply = <&vsys_3v3>;
|
|
vcc7-supply = <&vsys_3v3>;
|
|
vcc8-supply = <&vsys_3v3>;
|
|
vcc9-supply = <&vsys_3v3>;
|
|
vcc10-supply = <&vsys_3v3>;
|
|
vcc11-supply = <&vsys_3v3>;
|
|
vcc12-supply = <&vsys_3v3>;
|
|
vddio-supply = <&vcc_1v8>;
|
|
|
|
regulators {
|
|
vdd_center: DCDC_REG1 {
|
|
regulator-name = "vdd_center";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_l: DCDC_REG2 {
|
|
regulator-name = "vdd_cpu_l";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: DCDC_REG4 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc1v8_apio2: LDO_REG1 {
|
|
regulator-name = "vcc1v8_apio2";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_vldo2: LDO_REG2 {
|
|
regulator-name = "vcc_vldo2";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc1v8_pmupll: LDO_REG3 {
|
|
regulator-name = "vcc1v8_pmupll";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG4 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcc_vldo5: LDO_REG5 {
|
|
regulator-name = "vcc_vldo5";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v5: LDO_REG6 {
|
|
regulator-name = "vcc_1v5";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1500000>;
|
|
};
|
|
};
|
|
|
|
vcc1v8_codec: LDO_REG7 {
|
|
regulator-name = "vcc1v8_codec";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v0: LDO_REG8 {
|
|
regulator-name = "vcc_3v0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
|
regulator-name = "vcc3v3_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s0: SWITCH_REG2 {
|
|
regulator-name = "vcc3v3_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vdd_cpu_b: regulator@40 {
|
|
compatible = "silergy,syr827";
|
|
reg = <0x40>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cpu_b_sleep>;
|
|
regulator-name = "vdd_cpu_b";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-ramp-delay = <1000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vsys_3v3>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: regulator@41 {
|
|
compatible = "silergy,syr828";
|
|
reg = <0x41>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpu_sleep>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-ramp-delay = <1000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vsys_3v3>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c8 {
|
|
clock-frequency = <400000>;
|
|
i2c-scl-rising-time-ns = <160>;
|
|
i2c-scl-falling-time-ns = <30>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s0 {
|
|
rockchip,playback-channels = <8>;
|
|
rockchip,capture-channels = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s1 {
|
|
rockchip,playback-channels = <2>;
|
|
rockchip,capture-channels = <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&io_domains {
|
|
bt656-supply = <&vcc1v8_apio2>;
|
|
audio-supply = <&vcc1v8_codec>;
|
|
sdmmc-supply = <&vccio_sd>;
|
|
gpio1830-supply = <&vcc_3v0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
pmu1830-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
bt {
|
|
bt_host_wake_l: bt-host-wake-l {
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_reg_on_h: bt-reg-on-h {
|
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_wake_l: bt-wake-l {
|
|
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
buttons {
|
|
pwrbtn: pwrbtn {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
ir {
|
|
ir_rx: ir-rx {
|
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
sys_led_pin: sys-led-pin {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
user_led_pin: user-led-pin {
|
|
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
cpu_b_sleep: cpu-b-sleep {
|
|
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
gpu_sleep: gpu-sleep {
|
|
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb2 {
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wifi {
|
|
wifi_host_wake_l: wifi-host-wake-l {
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcca1v8_s3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio0 {
|
|
/* WiFi & BT combo module Ampak AP6356S */
|
|
bus-width = <4>;
|
|
cap-sdio-irq;
|
|
cap-sd-highspeed;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
|
sd-uhs-sdr104;
|
|
vqmmc-supply = <&vcc1v8_s3>;
|
|
vmmc-supply = <&vccio_sd>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
interrupt-names = "host-wake";
|
|
brcm,drive-strength = <5>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake_l>;
|
|
};
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
max-frequency = <150000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
|
|
spiflash: flash@0 {
|
|
compatible = "winbond,w25q128fw", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <104000000>;
|
|
};
|
|
};
|
|
|
|
&tcphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tcphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
/* tshut mode 0:CRU 1:GPIO */
|
|
rockchip,hw-tshut-mode = <1>;
|
|
/* tshut polarity 0:LOW 1:HIGH */
|
|
rockchip,hw-tshut-polarity = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
|
|
u2phy0_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy0_host: host-port {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
|
|
u2phy1_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy1_host: host-port {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
clocks = <&rk808 1>;
|
|
clock-names = "lpo";
|
|
device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
max-speed = <4000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
|
|
vbat-supply = <&vsys_3v3>;
|
|
vddio-supply = <&vcc_1v8>;
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl_mmu {
|
|
status = "okay";
|
|
};
|