mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
e61374b7af
switch the pin definitions from AM33XX_IOPAD to AM33XX_PADCONF macro Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Reviewed-by: Tom Rini <trini@konsulko.com>
576 lines
15 KiB
Text
576 lines
15 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Copyright (C) 2018 Robert Bosch Power Tools GmbH
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "am33xx.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "Bosch AM335x Guardian";
|
|
compatible = "bosch,am335x-guardian", "ti,am33xx";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
tick-timer = &timer2;
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&dcdc2_reg>;
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&guardian_button_pins>;
|
|
|
|
select-button {
|
|
label = "guardian-select-button";
|
|
linux,code = <KEY_5>;
|
|
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
};
|
|
|
|
power-button {
|
|
label = "guardian-power-button";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&guardian_led_pins>;
|
|
|
|
life-led {
|
|
label = "guardian:life-led";
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
panel {
|
|
compatible = "ti,tilcdc,panel";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
|
|
pinctrl-1 = <&lcd_pins_sleep>;
|
|
|
|
display-timings {
|
|
320x240 {
|
|
hactive = <320>;
|
|
vactive = <240>;
|
|
hback-porch = <68>;
|
|
hfront-porch = <20>;
|
|
hsync-len = <1>;
|
|
vback-porch = <18>;
|
|
vfront-porch = <4>;
|
|
vsync-len = <1>;
|
|
clock-frequency = <9000000>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
};
|
|
};
|
|
panel-info {
|
|
ac-bias = <255>;
|
|
ac-bias-intrpt = <0>;
|
|
dma-burst-sz = <16>;
|
|
bpp = <16>;
|
|
bus-width = <16>;
|
|
fdd = <0x80>;
|
|
sync-edge = <0>;
|
|
sync-ctrl = <1>;
|
|
raster-order = <0>;
|
|
fifo-th = <0>;
|
|
};
|
|
|
|
};
|
|
|
|
pwm7: dmtimer-pwm {
|
|
compatible = "ti,omap-dmtimer-pwm";
|
|
ti,timers = <&timer7>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dmtimer7_pins>;
|
|
};
|
|
|
|
vmmcsd_fixed: regulator-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmcsd_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&cppi41dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nandflash_pins>;
|
|
ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
|
|
status = "okay";
|
|
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
|
ti,nand-ecc-opt = "bch16";
|
|
ti,elm-id = <&elm>;
|
|
nand-bus-width = <8>;
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <30>;
|
|
gpmc,cs-wr-off-ns = <30>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <30>;
|
|
gpmc,adv-wr-off-ns = <30>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <15>;
|
|
gpmc,oe-on-ns = <1>;
|
|
gpmc,oe-off-ns = <15>;
|
|
gpmc,access-ns = <30>;
|
|
gpmc,rd-cycle-ns = <30>;
|
|
gpmc,wr-cycle-ns = <30>;
|
|
gpmc,wait-on-read = "true";
|
|
gpmc,wait-on-write = "true";
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,wr-access-ns = <0>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
/*
|
|
* MTD partition table
|
|
*
|
|
* All SPL-* partitions are sized to minimal length which can
|
|
* be independently programmable. For NAND flash this is equal
|
|
* to size of erase-block.
|
|
*/
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "SPL";
|
|
reg = <0x0 0x40000>;
|
|
};
|
|
|
|
partition@1 {
|
|
label = "SPL.backup1";
|
|
reg = <0x40000 0x40000>;
|
|
};
|
|
|
|
partition@2 {
|
|
label = "SPL.backup2";
|
|
reg = <0x80000 0x40000>;
|
|
};
|
|
|
|
partition@3 {
|
|
label = "SPL.backup3";
|
|
reg = <0xc0000 0x40000>;
|
|
};
|
|
|
|
partition@4 {
|
|
label = "u-boot";
|
|
reg = <0x100000 0x100000>;
|
|
};
|
|
|
|
partition@5 {
|
|
label = "u-boot.backup1";
|
|
reg = <0x200000 0x100000>;
|
|
};
|
|
|
|
partition@6 {
|
|
label = "u-boot-2";
|
|
reg = <0x300000 0x100000>;
|
|
};
|
|
|
|
partition@7 {
|
|
label = "u-boot-2.backup1";
|
|
reg = <0x400000 0x100000>;
|
|
};
|
|
|
|
partition@8 {
|
|
label = "u-boot-env";
|
|
reg = <0x500000 0x40000>;
|
|
};
|
|
|
|
partition@9 {
|
|
label = "u-boot-env.backup1";
|
|
reg = <0x540000 0x40000>;
|
|
};
|
|
|
|
partition@10 {
|
|
label = "splash-screen";
|
|
reg = <0x580000 0x40000>;
|
|
};
|
|
|
|
partition@11 {
|
|
label = "UBI";
|
|
reg = <0x5c0000 0x1fa40000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
tps: tps@24 {
|
|
reg = <0x24>;
|
|
};
|
|
};
|
|
|
|
&lcdc {
|
|
blue-and-red-wiring = "crossed";
|
|
status = "okay";
|
|
|
|
port {
|
|
lcdc_0: endpoint@0 {
|
|
remote-endpoint = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
bus-width = <0x4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
|
|
clock-names = "ext-clk", "int-clk";
|
|
system-power-controller;
|
|
};
|
|
|
|
&spi0 {
|
|
ti,pindir-d0-out-d1-in;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
/include/ "tps65217.dtsi"
|
|
|
|
&tps {
|
|
ti,pmic-shutdown-controller;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <7>; /* NMI */
|
|
|
|
backlight {
|
|
isel = <1>; /* 1 - ISET1, 2 ISET2 */
|
|
fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
|
|
default-brightness = <100>;
|
|
};
|
|
|
|
regulators {
|
|
dcdc1_reg: regulator@0 {
|
|
regulator-name = "vdds_dpr";
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc2_reg: regulator@1 {
|
|
regulator-name = "vdd_mpu";
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <1351500>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
dcdc3_reg: regulator@2 {
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <925000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: regulator@3 {
|
|
regulator-name = "vio,vrtc,vdds";
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: regulator@4 {
|
|
regulator-name = "vdd_3v3aux";
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: regulator@5 {
|
|
regulator-name = "vdd_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: regulator@6 {
|
|
regulator-name = "vdd_3v3a";
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tscadc {
|
|
status = "okay";
|
|
|
|
adc {
|
|
ti,adc-channels = <0 1 2 3 4 5 6>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_ctrl_mod {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&am33xx_pinmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
|
|
|
|
clkout2_pin: pinmux_clkout2_pin {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
|
|
>;
|
|
};
|
|
|
|
dmtimer7_pins: pinmux_dmtimer7_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE5)
|
|
>;
|
|
};
|
|
|
|
guardian_button_pins: pinmux_gpio_keys_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT, MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
guardian_interface_pins: pinmux_guardian_interface_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLUP, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT, MUX_MODE7)
|
|
AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
lcd_disen_pins: pinmux_lcd_disen_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW, MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
lcd_pins_default: pinmux_lcd_pins_default {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT | SLEWCTRL_SLOW, MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
lcd_pins_sleep: pinmux_lcd_pins_sleep {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA0, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA1, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA2, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA3, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA4, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA5, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA6, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA7, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA8, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA9, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA10, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA11, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA12, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA13, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA14, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_DATA15, PULL_DISABLE | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW, MUX_MODE7)
|
|
AM33XX_PADCONF
|
|
(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW, MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
guardian_led_pins: pinmux_leds_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_OUTPUT, MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
spi0_pins: pinmux_spi0_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT_PULLUP, MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
uart0_pins: pinmux_uart0_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)
|
|
AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
|
|
>;
|
|
};
|
|
|
|
nandflash_pins: pinmux_nandflash_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
|
|
>;
|
|
};
|
|
};
|