Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-30 00:21:06 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/block/ata_piix.c
Pavel Herrmann e46a4350b4 sata.h: Make all sata/ata drivers include <sata.h> 
- block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt
  not ulong.
- We also move the extern of sata_dev_desc into <sata.h>
- Remove now duplicate declarations from driver-specific headers.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-15 11:54:03 -07:00

724 lines
18 KiB
C
Raw Blame History

/*
* Copyright (C) Procsys. All rights reserved.
* Author: Mushtaq Khan <mushtaq_k@procsys.com>
* <mushtaqk_921@yahoo.co.in>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* with the reference to ata_piix driver in kernel 2.4.32
*/
/*
* This file contains SATA controller and SATA drive initialization functions
*/
#include <common.h>
#include <asm/io.h>
#include <pci.h>
#include <command.h>
#include <config.h>
#include <asm/byteorder.h>
#include <part.h>
#include <ide.h>
#include <ata.h>
#include <sata.h>
#define DEBUG_SATA 0 /* For debug prints set DEBUG_SATA to 1 */
#define SATA_DECL
#define DRV_DECL /* For file specific declarations */
#include "ata_piix.h"
/* Macros realted to PCI */
#define PCI_SATA_BUS 0x00
#define PCI_SATA_DEV 0x1f
#define PCI_SATA_FUNC 0x02
#define PCI_SATA_BASE1 0x10
#define PCI_SATA_BASE2 0x14
#define PCI_SATA_BASE3 0x18
#define PCI_SATA_BASE4 0x1c
#define PCI_SATA_BASE5 0x20
#define PCI_PMR 0x90
#define PCI_PI 0x09
#define PCI_PCS 0x92
#define PCI_DMA_CTL 0x48
#define PORT_PRESENT (1<<0)
#define PORT_ENABLED (1<<4)
u32 bdf;
u32 iobase1; /* Primary cmd block */
u32 iobase2; /* Primary ctl block */
u32 iobase3; /* Sec cmd block */
u32 iobase4; /* sec ctl block */
u32 iobase5; /* BMDMA*/
int pci_sata_init(void)
{
u32 bus = PCI_SATA_BUS;
u32 dev = PCI_SATA_DEV;
u32 fun = PCI_SATA_FUNC;
u16 cmd = 0;
u8 lat = 0, pcibios_max_latency = 0xff;
u8 pmr; /* Port mapping reg */
u8 pi; /* Prgming Interface reg */
bdf = PCI_BDF(bus, dev, fun);
pci_read_config_dword(bdf, PCI_SATA_BASE1, &iobase1);
pci_read_config_dword(bdf, PCI_SATA_BASE2, &iobase2);
pci_read_config_dword(bdf, PCI_SATA_BASE3, &iobase3);
pci_read_config_dword(bdf, PCI_SATA_BASE4, &iobase4);
pci_read_config_dword(bdf, PCI_SATA_BASE5, &iobase5);
if ((iobase1 == 0xFFFFFFFF) || (iobase2 == 0xFFFFFFFF) ||
(iobase3 == 0xFFFFFFFF) || (iobase4 == 0xFFFFFFFF) ||
(iobase5 == 0xFFFFFFFF)) {
/* ERROR */
printf("error no base addr for SATA controller\n");
return 1;
}
iobase1 &= 0xFFFFFFFE;
iobase2 &= 0xFFFFFFFE;
iobase3 &= 0xFFFFFFFE;
iobase4 &= 0xFFFFFFFE;
iobase5 &= 0xFFFFFFFE;
/* check for mode */
pci_read_config_byte(bdf, PCI_PMR, &pmr);
if (pmr > 1) {
puts("combined mode not supported\n");
return 1;
}
pci_read_config_byte(bdf, PCI_PI, &pi);
if ((pi & 0x05) != 0x05) {
puts("Sata is in Legacy mode\n");
return 1;
} else
puts("sata is in Native mode\n");
/* MASTER CFG AND IO CFG */
pci_read_config_word(bdf, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
pci_write_config_word(bdf, PCI_COMMAND, cmd);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
if (lat < 16)
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
else if (lat > pcibios_max_latency)
lat = pcibios_max_latency;
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
return 0;
}
int sata_bus_probe(int port_no)
{
int orig_mask, mask;
u16 pcs;
mask = (PORT_PRESENT << port_no);
pci_read_config_word(bdf, PCI_PCS, &pcs);
orig_mask = (int) pcs & 0xff;
if ((orig_mask & mask) != mask)
return 0;
else
return 1;
}
int init_sata(int dev)
{
static int done;
u8 i, rv = 0;
if (!done)
done = 1;
else
return 0;
rv = pci_sata_init();
if (rv == 1) {
puts("pci initialization failed\n");
return 1;
}
port[0].port_no = 0;
port[0].ioaddr.cmd_addr = iobase1;
port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr =
iobase2 | ATA_PCI_CTL_OFS;
port[0].ioaddr.bmdma_addr = iobase5;
port[1].port_no = 1;
port[1].ioaddr.cmd_addr = iobase3;
port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr =
iobase4 | ATA_PCI_CTL_OFS;
port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
sata_port(&port[i].ioaddr);
for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
if (!(sata_bus_probe(i))) {
port[i].port_state = 0;
printf("SATA#%d port is not present\n", i);
} else {
printf("SATA#%d port is present\n", i);
if (sata_bus_softreset(i))
port[i].port_state = 0;
else
port[i].port_state = 1;
}
}
for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
u8 j, devno;
if (port[i].port_state == 0)
continue;
for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
sata_identify(i, j);
set_Feature_cmd(i, j);
devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
if ((sata_dev_desc[devno].lba > 0) &&
(sata_dev_desc[devno].blksz > 0)) {
dev_print(&sata_dev_desc[devno]);
/* initialize partition type */
init_part(&sata_dev_desc[devno]);
}
}
}
return 0;
}
static inline u8 sata_inb(unsigned long ioaddr)
{
return inb(ioaddr);
}
static inline void sata_outb(unsigned char val, unsigned long ioaddr)
{
outb(val, ioaddr);
}
static void output_data(struct sata_ioports *ioaddr, ulong * sect_buf,
int words)
{
outsw(ioaddr->data_addr, sect_buf, words << 1);
}
static int input_data(struct sata_ioports *ioaddr, ulong * sect_buf, int words)
{
insw(ioaddr->data_addr, sect_buf, words << 1);
return 0;
}
static void sata_cpy(unsigned char *dst, unsigned char *src, unsigned int len)
{
unsigned char *end, *last;
last = dst;
end = src + len - 1;
/* reserve space for '\0' */
if (len < 2)
goto OUT;
/* skip leading white space */
while ((*src) && (src < end) && (*src == ' '))
++src;
/* copy string, omitting trailing white space */
while ((*src) && (src < end)) {
*dst++ = *src;
if (*src++ != ' ')
last = dst;
}
OUT:
*last = '\0';
}
int sata_bus_softreset(int num)
{
u8 dev = 0, status = 0, i;
port[num].dev_mask = 0;
for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
if (!(sata_devchk(&port[num].ioaddr, i))) {
debug("dev_chk failed for dev#%d\n", i);
} else {
port[num].dev_mask |= (1 << i);
debug("dev_chk passed for dev#%d\n", i);
}
}
if (!(port[num].dev_mask)) {
printf("no devices on port%d\n", num);
return 1;
}
dev_select(&port[num].ioaddr, dev);
port[num].ctl_reg = 0x08; /* Default value of control reg */
sata_outb(port[num].ctl_reg, port[num].ioaddr.ctl_addr);
udelay(10);
sata_outb(port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr);
udelay(10);
sata_outb(port[num].ctl_reg, port[num].ioaddr.ctl_addr);
/*
* spec mandates ">= 2ms" before checking status.
* We wait 150ms, because that was the magic delay used for
* ATAPI devices in Hale Landis's ATADRVR, for the period of time
* between when the ATA command register is written, and then
* status is checked. Because waiting for "a while" before
* checking status is fine, post SRST, we perform this magic
* delay here as well.
*/
mdelay(150);
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 300);
while ((status & ATA_BUSY)) {
mdelay(100);
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 3);
}
if (status & ATA_BUSY)
printf("ata%u is slow to respond,plz be patient\n", num);
while ((status & ATA_BUSY)) {
mdelay(100);
status = sata_chk_status(&port[num].ioaddr);
}
if (status & ATA_BUSY) {
printf("ata%u failed to respond : bus reset failed\n", num);
return 1;
}
return 0;
}
void sata_identify(int num, int dev)
{
u8 cmd = 0, status = 0;
u8 devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
u16 iobuf[ATA_SECT_SIZE];
u64 n_sectors = 0;
u8 mask = 0;
memset(iobuf, 0, sizeof(iobuf));
hd_driveid_t *iop = (hd_driveid_t *) iobuf;
if (dev == 0)
mask = 0x01;
else
mask = 0x02;
if (!(port[num].dev_mask & mask)) {
printf("dev%d is not present on port#%d\n", dev, num);
return;
}
printf("port=%d dev=%d\n", num, dev);
dev_select(&port[num].ioaddr, dev);
status = 0;
cmd = ATA_CMD_IDENT; /* Device Identify Command */
sata_outb(cmd, port[num].ioaddr.command_addr);
sata_inb(port[num].ioaddr.altstatus_addr);
udelay(10);
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 1000);
if (status & ATA_ERR) {
puts("\ndevice not responding\n");
port[num].dev_mask &= ~mask;
return;
}
input_data(&port[num].ioaddr, (ulong *) iobuf, ATA_SECTORWORDS);
debug("\nata%u: dev %u cfg 49:%04x 82:%04x 83:%04x 84:%04x85:%04x"
"86:%04x" "87:%04x 88:%04x\n", num, dev, iobuf[49],
iobuf[82], iobuf[83], iobuf[84], iobuf[85], iobuf[86],
iobuf[87], iobuf[88]);
/* we require LBA and DMA support (bits 8 & 9 of word 49) */
if (!ata_id_has_dma(iobuf) || !ata_id_has_lba(iobuf))
debug("ata%u: no dma/lba\n", num);
ata_dump_id(iobuf);
if (ata_id_has_lba48(iobuf))
n_sectors = ata_id_u64(iobuf, 100);
else
n_sectors = ata_id_u32(iobuf, 60);
debug("no. of sectors %u\n", ata_id_u64(iobuf, 100));
debug("no. of sectors %u\n", ata_id_u32(iobuf, 60));
if (n_sectors == 0) {
port[num].dev_mask &= ~mask;
return;
}
sata_cpy((unsigned char *)sata_dev_desc[devno].revision, iop->fw_rev,
sizeof(sata_dev_desc[devno].revision));
sata_cpy((unsigned char *)sata_dev_desc[devno].vendor, iop->model,
sizeof(sata_dev_desc[devno].vendor));
sata_cpy((unsigned char *)sata_dev_desc[devno].product, iop->serial_no,
sizeof(sata_dev_desc[devno].product));
strswab(sata_dev_desc[devno].revision);
strswab(sata_dev_desc[devno].vendor);
if ((iop->config & 0x0080) == 0x0080)
sata_dev_desc[devno].removable = 1;
else
sata_dev_desc[devno].removable = 0;
sata_dev_desc[devno].lba = iop->lba_capacity;
debug("lba=0x%x", sata_dev_desc[devno].lba);
#ifdef CONFIG_LBA48
if (iop->command_set_2 & 0x0400) {
sata_dev_desc[devno].lba48 = 1;
lba = (unsigned long long) iop->lba48_capacity[0] |
((unsigned long long) iop->lba48_capacity[1] << 16) |
((unsigned long long) iop->lba48_capacity[2] << 32) |
((unsigned long long) iop->lba48_capacity[3] << 48);
} else {
sata_dev_desc[devno].lba48 = 0;
}
#endif
/* assuming HD */
sata_dev_desc[devno].type = DEV_TYPE_HARDDISK;
sata_dev_desc[devno].blksz = ATA_BLOCKSIZE;
sata_dev_desc[devno].lun = 0; /* just to fill something in... */
}
void set_Feature_cmd(int num, int dev)
{
u8 mask = 0x00, status = 0;
if (dev == 0)
mask = 0x01;
else
mask = 0x02;
if (!(port[num].dev_mask & mask)) {
debug("dev%d is not present on port#%d\n", dev, num);
return;
}
dev_select(&port[num].ioaddr, dev);
sata_outb(SETFEATURES_XFER, port[num].ioaddr.feature_addr);
sata_outb(XFER_PIO_4, port[num].ioaddr.nsect_addr);
sata_outb(0, port[num].ioaddr.lbal_addr);
sata_outb(0, port[num].ioaddr.lbam_addr);
sata_outb(0, port[num].ioaddr.lbah_addr);
sata_outb(ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
sata_outb(ATA_CMD_SETF, port[num].ioaddr.command_addr);
udelay(50);
mdelay(150);
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 5000);
if ((status & (ATA_STAT_BUSY | ATA_STAT_ERR))) {
printf("Error : status 0x%02x\n", status);
port[num].dev_mask &= ~mask;
}
}
void sata_port(struct sata_ioports *ioport)
{
ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA;
ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR;
ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE;
ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT;
ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL;
ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM;
ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH;
ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE;
ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS;
ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD;
}
int sata_devchk(struct sata_ioports *ioaddr, int dev)
{
u8 nsect, lbal;
dev_select(ioaddr, dev);
sata_outb(0x55, ioaddr->nsect_addr);
sata_outb(0xaa, ioaddr->lbal_addr);
sata_outb(0xaa, ioaddr->nsect_addr);
sata_outb(0x55, ioaddr->lbal_addr);
sata_outb(0x55, ioaddr->nsect_addr);
sata_outb(0xaa, ioaddr->lbal_addr);
nsect = sata_inb(ioaddr->nsect_addr);
lbal = sata_inb(ioaddr->lbal_addr);
if ((nsect == 0x55) && (lbal == 0xaa))
return 1; /* we found a device */
else
return 0; /* nothing found */
}
void dev_select(struct sata_ioports *ioaddr, int dev)
{
u8 tmp = 0;
if (dev == 0)
tmp = ATA_DEVICE_OBS;
else
tmp = ATA_DEVICE_OBS | ATA_DEV1;
sata_outb(tmp, ioaddr->device_addr);
sata_inb(ioaddr->altstatus_addr);
udelay(5);
}
u8 sata_busy_wait(struct sata_ioports *ioaddr, int bits, unsigned int max)
{
u8 status;
do {
udelay(1000);
status = sata_chk_status(ioaddr);
max--;
} while ((status & bits) && (max > 0));
return status;
}
u8 sata_chk_status(struct sata_ioports *ioaddr)
{
return sata_inb(ioaddr->status_addr);
}
ulong sata_read(int device, ulong blknr, lbaint_t blkcnt, void *buff)
{
ulong n = 0, *buffer = (ulong *)buff;
u8 dev = 0, num = 0, mask = 0, status = 0;
#ifdef CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000) {
if (!sata_dev_desc[devno].lba48) {
printf("Drive doesn't support 48-bit addressing\n");
return 0;
}
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
/* Port Number */
num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/* dev on the port */
if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;
if (dev == 0)
mask = 0x01;
else
mask = 0x02;
if (!(port[num].dev_mask & mask)) {
printf("dev%d is not present on port#%d\n", dev, num);
return 0;
}
/* Select device */
dev_select(&port[num].ioaddr, dev);
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
if (status & ATA_BUSY) {
printf("ata%u failed to respond\n", port[num].port_no);
return n;
}
while (blkcnt-- > 0) {
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
if (status & ATA_BUSY) {
printf("ata%u failed to respond\n", 0);
return n;
}
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
sata_outb(0, port[num].ioaddr.nsect_addr);
sata_outb((blknr >> 24) & 0xFF,
port[num].ioaddr.lbal_addr);
sata_outb((blknr >> 32) & 0xFF,
port[num].ioaddr.lbam_addr);
sata_outb((blknr >> 40) & 0xFF,
port[num].ioaddr.lbah_addr);
}
#endif
sata_outb(1, port[num].ioaddr.nsect_addr);
sata_outb(((blknr) >> 0) & 0xFF,
port[num].ioaddr.lbal_addr);
sata_outb((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
sata_outb((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
#ifdef CONFIG_LBA48
if (lba48) {
sata_outb(ATA_LBA, port[num].ioaddr.device_addr);
sata_outb(ATA_CMD_READ_EXT,
port[num].ioaddr.command_addr);
} else
#endif
{
sata_outb(ATA_LBA | ((blknr >> 24) & 0xF),
port[num].ioaddr.device_addr);
sata_outb(ATA_CMD_READ,
port[num].ioaddr.command_addr);
}
mdelay(50);
/* may take up to 4 sec */
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 4000);
if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
!= ATA_STAT_DRQ) {
u8 err = 0;
printf("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
device, (ulong) blknr, status);
err = sata_inb(port[num].ioaddr.error_addr);
printf("Error reg = 0x%x\n", err);
return n;
}
input_data(&port[num].ioaddr, buffer, ATA_SECTORWORDS);
sata_inb(port[num].ioaddr.altstatus_addr);
udelay(50);
++n;
++blknr;
buffer += ATA_SECTORWORDS;
}
return n;
}
ulong sata_write(int device, ulong blknr, lbaint_t blkcnt, const void *buff)
{
ulong n = 0, *buffer = (ulong *)buff;
unsigned char status = 0, num = 0, dev = 0, mask = 0;
#ifdef CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000) {
if (!sata_dev_desc[devno].lba48) {
printf("Drive doesn't support 48-bit addressing\n");
return 0;
}
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
/* Port Number */
num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/* dev on the Port */
if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;
if (dev == 0)
mask = 0x01;
else
mask = 0x02;
/* Select device */
dev_select(&port[num].ioaddr, dev);
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
if (status & ATA_BUSY) {
printf("ata%u failed to respond\n", port[num].port_no);
return n;
}
while (blkcnt-- > 0) {
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500);
if (status & ATA_BUSY) {
printf("ata%u failed to respond\n",
port[num].port_no);
return n;
}
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
sata_outb(0, port[num].ioaddr.nsect_addr);
sata_outb((blknr >> 24) & 0xFF,
port[num].ioaddr.lbal_addr);
sata_outb((blknr >> 32) & 0xFF,
port[num].ioaddr.lbam_addr);
sata_outb((blknr >> 40) & 0xFF,
port[num].ioaddr.lbah_addr);
}
#endif
sata_outb(1, port[num].ioaddr.nsect_addr);
sata_outb((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr);
sata_outb((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
sata_outb((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
#ifdef CONFIG_LBA48
if (lba48) {
sata_outb(ATA_LBA, port[num].ioaddr.device_addr);
sata_outb(ATA_CMD_WRITE_EXT,
port[num].ioaddr.command_addr);
} else
#endif
{
sata_outb(ATA_LBA | ((blknr >> 24) & 0xF),
port[num].ioaddr.device_addr);
sata_outb(ATA_CMD_WRITE,
port[num].ioaddr.command_addr);
}
mdelay(50);
/* may take up to 4 sec */
status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 4000);
if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR))
!= ATA_STAT_DRQ) {
printf("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
device, (ulong) blknr, status);
return n;
}
output_data(&port[num].ioaddr, buffer, ATA_SECTORWORDS);
sata_inb(port[num].ioaddr.altstatus_addr);
udelay(50);
++n;
++blknr;
buffer += ATA_SECTORWORDS;
}
return n;
}
int scan_sata(int dev)
{
return 0;
}
Reference in a new issue View git blame Copy permalink