u-boot/board/matrix_vision/mvsmr/bootscript
Andre Schwarz 1f2463d764 Add initial support for Matrix Vision mvSMR board based on MPC5200B.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2010-04-10 00:06:05 +02:00

42 lines
1.4 KiB
Text

echo
echo "==== running autoscript ===="
echo
setenv boot24 'bootm ${kernel_boot} ${mv_initrd_addr_ram}'
setenv ramkernel 'setenv kernel_boot ${loadaddr}'
setenv flashkernel 'setenv kernel_boot ${mv_kernel_addr}'
setenv cpird 'cp ${mv_initrd_addr} ${mv_initrd_addr_ram} ${mv_initrd_length}'
setenv bootfromflash run flashkernel cpird addcons boot24
setenv bootfromnet 'tftp ${mv_initrd_addr_ram} ${initrd_name};run ramkernel'
if test ${console} = yes;
then
setenv addcons 'setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8'
else
setenv addcons 'setenv bootargs ${bootargs} console=tty0'
fi
setenv set_static_ip 'setenv ipaddr ${static_ipaddr}'
setenv set_static_nm 'setenv netmask ${static_netmask}'
setenv set_static_gw 'setenv gatewayip ${static_gateway}'
setenv set_ip 'setenv ip ${ipaddr}::${gatewayip}:${netmask}'
if test ${servicemode} != yes;
then
echo "=== forced flash mode ==="
run set_static_ip set_static_nm set_static_gw set_ip bootfromflash
fi
if test ${autoscript_boot} != no;
then
if test ${netboot} = yes;
then
bootp
if test $? = 0;
then
echo "=== bootp succeeded -> netboot ==="
run set_ip bootfromnet addcons boot24
else
echo "=== netboot failed ==="
fi
fi
echo "=== bootfromflash ==="
run set_static_ip set_static_nm set_static_gw set_ip bootfromflash
else
echo "=== boot stopped with autoscript_boot no ==="
fi