2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-19 17:53:08 +00:00
u-boot/arch/arc/lib/ints_low.S
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

178 lines
2.9 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
*/
#include <linux/linkage.h>
/*
* Note on the LD/ST addressing modes with address register write-back
*
* LD.a same as LD.aw
*
* LD.a reg1, [reg2, x] => Pre Incr
* Eff Addr for load = [reg2 + x]
*
* LD.ab reg1, [reg2, x] => Post Incr
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [%sp, -4]
.endm
.macro PUSHAX aux
lr %r9, [\aux]
PUSH %r9
.endm
.macro SAVE_R1_TO_R24
PUSH %r1
PUSH %r2
PUSH %r3
PUSH %r4
PUSH %r5
PUSH %r6
PUSH %r7
PUSH %r8
PUSH %r9
PUSH %r10
PUSH %r11
PUSH %r12
PUSH %r13
PUSH %r14
PUSH %r15
PUSH %r16
PUSH %r17
PUSH %r18
PUSH %r19
PUSH %r20
PUSH %r21
PUSH %r22
PUSH %r23
PUSH %r24
.endm
.macro SAVE_ALL_SYS
/* saving %r0 to reg->r0 in advance since we read %ecr into it */
st %r0, [%sp, -8]
lr %r0, [%ecr] /* all stack addressing is manual so far */
st %r0, [%sp]
st %sp, [%sp, -4]
/* now move %sp to reg->r0 position so we can do "push" automatically */
sub %sp, %sp, 8
SAVE_R1_TO_R24
PUSH %r25
PUSH %gp
PUSH %fp
PUSH %blink
PUSHAX %eret
PUSHAX %erstatus
PUSH %lp_count
PUSHAX %lp_end
PUSHAX %lp_start
PUSHAX %erbta
.endm
.macro SAVE_EXCEPTION_SOURCE
#ifdef CONFIG_MMU
/* If MMU exists exception faulting address is loaded in EFA reg */
lr %r0, [%efa]
#else
/* Otherwise in ERET (exception return) reg */
lr %r0, [%eret]
#endif
.endm
ENTRY(memory_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_memory_error
ENDPROC(memory_error)
ENTRY(instruction_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_instruction_error
ENDPROC(instruction_error)
ENTRY(interrupt_handler)
/* Todo - save and restore CPU context when interrupts will be in use */
bl do_interrupt_handler
rtie
ENDPROC(interrupt_handler)
ENTRY(EV_MachineCheck)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_machine_check_fault
ENDPROC(EV_MachineCheck)
ENTRY(EV_TLBMissI)
SAVE_ALL_SYS
mov %r0, %sp
j do_itlb_miss
ENDPROC(EV_TLBMissI)
ENTRY(EV_TLBMissD)
SAVE_ALL_SYS
mov %r0, %sp
j do_dtlb_miss
ENDPROC(EV_TLBMissD)
ENTRY(EV_TLBProtV)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_tlb_prot_violation
ENDPROC(EV_TLBProtV)
ENTRY(EV_PrivilegeV)
SAVE_ALL_SYS
mov %r0, %sp
j do_privilege_violation
ENDPROC(EV_PrivilegeV)
ENTRY(EV_Trap)
SAVE_ALL_SYS
mov %r0, %sp
j do_trap
ENDPROC(EV_Trap)
ENTRY(EV_Extension)
SAVE_ALL_SYS
mov %r0, %sp
j do_extension
ENDPROC(EV_Extension)
#ifdef CONFIG_ISA_ARCV2
ENTRY(EV_SWI)
SAVE_ALL_SYS
mov %r0, %sp
j do_swi
ENDPROC(EV_SWI)
ENTRY(EV_DivZero)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_divzero
ENDPROC(EV_DivZero)
ENTRY(EV_DCError)
SAVE_ALL_SYS
mov %r0, %sp
j do_dcerror
ENDPROC(EV_DCError)
ENTRY(EV_Maligned)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_maligned
ENDPROC(EV_Maligned)
#endif