u-boot/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S
Albert ARIBAUD b60eff31f3 arm: remove unneeded symbol offsets and _TEXT_BASE
Remove the last uses of symbol offsets in ARM U-Boot.
Remove some needless uses of _TEXT_BASE.
Remove all _TEXT_BASE definitions.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-02-26 21:18:12 +01:00

246 lines
6.3 KiB
ArmAsm

/*
* Memory Setup stuff - taken from blob memsetup.S
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
* Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
*
* Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_wdt.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91sam9_sdramc.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_rstc.h>
#ifdef CONFIG_ATMEL_LEGACY
#include <asm/arch/at91sam9_matrix.h>
#endif
#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL
#define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL
#endif
.globl lowlevel_init
.type lowlevel_init,function
lowlevel_init:
POS1:
adr r5, POS1 /* r5 = POS1 run time */
ldr r0, =POS1 /* r0 = POS1 compile */
sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */
/* memory control configuration 1 */
ldr r0, =SMRDATA
ldr r2, =SMRDATA1
add r0, r0, r5
add r2, r2, r5
0:
/* the address */
ldr r1, [r0], #4
/* the value */
ldr r3, [r0], #4
str r3, [r1]
cmp r2, r0
bne 0b
/* ----------------------------------------------------------------------------
* PMC Init Step 1.
* ----------------------------------------------------------------------------
* - Check if the PLL is already initialized
* ----------------------------------------------------------------------------
*/
ldr r1, =(AT91_ASM_PMC_MCKR)
ldr r0, [r1]
and r0, r0, #3
cmp r0, #0
bne PLL_setup_end
/* ---------------------------------------------------------------------------
* - Enable the Main Oscillator
* ---------------------------------------------------------------------------
*/
ldr r1, =(AT91_ASM_PMC_MOR)
ldr r2, =(AT91_ASM_PMC_SR)
/* Main oscillator Enable register PMC_MOR: */
ldr r0, =CONFIG_SYS_MOR_VAL
str r0, [r1]
/* Reading the PMC Status to detect when the Main Oscillator is enabled */
mov r4, #AT91_PMC_IXR_MOSCS
MOSCS_Loop:
ldr r3, [r2]
and r3, r4, r3
cmp r3, #AT91_PMC_IXR_MOSCS
bne MOSCS_Loop
/* ----------------------------------------------------------------------------
* PMC Init Step 2.
* ----------------------------------------------------------------------------
* Setup PLLA
* ----------------------------------------------------------------------------
*/
ldr r1, =(AT91_ASM_PMC_PLLAR)
ldr r0, =CONFIG_SYS_PLLAR_VAL
str r0, [r1]
/* Reading the PMC Status register to detect when the PLLA is locked */
mov r4, #AT91_PMC_IXR_LOCKA
MOSCS_Loop1:
ldr r3, [r2]
and r3, r4, r3
cmp r3, #AT91_PMC_IXR_LOCKA
bne MOSCS_Loop1
/* ----------------------------------------------------------------------------
* PMC Init Step 3.
* ----------------------------------------------------------------------------
* - Switch on the Main Oscillator
* ----------------------------------------------------------------------------
*/
ldr r1, =(AT91_ASM_PMC_MCKR)
/* -Master Clock Controller register PMC_MCKR */
ldr r0, =CONFIG_SYS_MCKR1_VAL
str r0, [r1]
/* Reading the PMC Status to detect when the Master clock is ready */
mov r4, #AT91_PMC_IXR_MCKRDY
MCKRDY_Loop:
ldr r3, [r2]
and r3, r4, r3
cmp r3, #AT91_PMC_IXR_MCKRDY
bne MCKRDY_Loop
ldr r0, =CONFIG_SYS_MCKR2_VAL
str r0, [r1]
/* Reading the PMC Status to detect when the Master clock is ready */
mov r4, #AT91_PMC_IXR_MCKRDY
MCKRDY_Loop1:
ldr r3, [r2]
and r3, r4, r3
cmp r3, #AT91_PMC_IXR_MCKRDY
bne MCKRDY_Loop1
PLL_setup_end:
/* ----------------------------------------------------------------------------
* - memory control configuration 2
* ----------------------------------------------------------------------------
*/
ldr r0, =(AT91_ASM_SDRAMC_TR)
ldr r1, [r0]
cmp r1, #0
bne SDRAM_setup_end
ldr r0, =SMRDATA1
ldr r2, =SMRDATA2
add r0, r0, r5
add r2, r2, r5
2:
/* the address */
ldr r1, [r0], #4
/* the value */
ldr r3, [r0], #4
str r3, [r1]
cmp r2, r0
bne 2b
SDRAM_setup_end:
/* everything is fine now */
mov pc, lr
.ltorg
SMRDATA:
.word AT91_ASM_WDT_MR
.word CONFIG_SYS_WDTC_WDMR_VAL
/* configure PIOx as EBI0 D[16-31] */
#if defined(CONFIG_AT91SAM9263)
.word AT91_ASM_PIOD_PDR
.word CONFIG_SYS_PIOD_PDR_VAL1
.word AT91_ASM_PIOD_PUDR
.word CONFIG_SYS_PIOD_PPUDR_VAL
.word AT91_ASM_PIOD_ASR
.word CONFIG_SYS_PIOD_PPUDR_VAL
#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) \
|| defined(CONFIG_AT91SAM9G20)
.word AT91_ASM_PIOC_PDR
.word CONFIG_SYS_PIOC_PDR_VAL1
.word AT91_ASM_PIOC_PUDR
.word CONFIG_SYS_PIOC_PPUDR_VAL
#endif
.word AT91_ASM_MATRIX_CSA0
.word CONFIG_SYS_MATRIX_EBICSA_VAL
/* flash */
.word AT91_ASM_SMC_MODE0
.word CONFIG_SYS_SMC0_MODE0_VAL
.word AT91_ASM_SMC_CYCLE0
.word CONFIG_SYS_SMC0_CYCLE0_VAL
.word AT91_ASM_SMC_PULSE0
.word CONFIG_SYS_SMC0_PULSE0_VAL
.word AT91_ASM_SMC_SETUP0
.word CONFIG_SYS_SMC0_SETUP0_VAL
SMRDATA1:
.word AT91_ASM_SDRAMC_MR
.word CONFIG_SYS_SDRC_MR_VAL1
.word AT91_ASM_SDRAMC_TR
.word CONFIG_SYS_SDRC_TR_VAL1
.word AT91_ASM_SDRAMC_CR
.word CONFIG_SYS_SDRC_CR_VAL
.word AT91_ASM_SDRAMC_MDR
.word CONFIG_SYS_SDRC_MDR_VAL
.word AT91_ASM_SDRAMC_MR
.word CONFIG_SYS_SDRC_MR_VAL2
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL1
.word AT91_ASM_SDRAMC_MR
.word CONFIG_SYS_SDRC_MR_VAL3
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL2
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL3
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL4
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL5
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL6
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL7
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL8
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL9
.word AT91_ASM_SDRAMC_MR
.word CONFIG_SYS_SDRC_MR_VAL4
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL10
.word AT91_ASM_SDRAMC_MR
.word CONFIG_SYS_SDRC_MR_VAL5
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL11
.word AT91_ASM_SDRAMC_TR
.word CONFIG_SYS_SDRC_TR_VAL2
.word CONFIG_SYS_SDRAM_BASE
.word CONFIG_SYS_SDRAM_VAL12
/* User reset enable*/
.word AT91_ASM_RSTC_MR
.word CONFIG_SYS_RSTC_RMR_VAL
#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP
/* MATRIX_MCFG - REMAP all masters */
.word AT91_ASM_MATRIX_MCFG
.word 0x1FF
#endif
SMRDATA2:
.word 0