mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
81724e09a0
Add support for using the Atmel MCI driver on at91sam9263ek. This change is modeled after the existing at91sam9260ek support. Please note that this hooks up slot1 (MCI1) for SD. Not both. Tested with at91bootstrap and u-boot on dataflash in slot 0 and fat-formatted 8GB SDHC in slot 1 on first revision at91sam9263ek (which must use dataflash in slot0 to boot). CONFIG_ATMEL_MCI_PORTB not tested. Signed-off-by: Andreas Henriksson <andreas.henriksson@endian.se> [remove empty line] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
218 lines
6.1 KiB
C
218 lines
6.1 KiB
C
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* (C) Copyright 2009-2011
|
|
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
|
|
* esd electronic system design gmbh <www.esd.eu>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
/*
|
|
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
|
|
* peripheral pins. Good to have if hardware is soldered optionally
|
|
* or in case of SPI no slave is selected. Avoid lines to float
|
|
* needlessly. Use a short local PUP define.
|
|
*
|
|
* Due to errata "TXD floats when CTS is inactive" pullups are always
|
|
* on for TXD pins.
|
|
*/
|
|
#ifdef CONFIG_AT91_GPIO_PULLUP
|
|
# define PUP CONFIG_AT91_GPIO_PULLUP
|
|
#else
|
|
# define PUP 0
|
|
#endif
|
|
|
|
void at91_serial0_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */
|
|
writel(1 << ATMEL_ID_USART0, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial1_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */
|
|
writel(1 << ATMEL_ID_USART1, &pmc->pcer);
|
|
}
|
|
|
|
void at91_serial2_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */
|
|
writel(1 << ATMEL_ID_USART2, &pmc->pcer);
|
|
}
|
|
|
|
void at91_seriald_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
|
|
writel(1 << ATMEL_ID_SYS, &pmc->pcer);
|
|
}
|
|
|
|
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
|
|
void at91_spi0_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */
|
|
|
|
/* Enable clock */
|
|
writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_b_periph(AT91_PIO_PORTA, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_b_periph(AT91_PIO_PORTB, 11, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 11, 1);
|
|
}
|
|
}
|
|
|
|
void at91_spi1_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */
|
|
|
|
/* Enable clock */
|
|
writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_GENERIC_ATMEL_MCI)
|
|
void at91_mci_hw_init(void)
|
|
{
|
|
/* Enable mci clock */
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
writel(1 << ATMEL_ID_MCI1, &pmc->pcer);
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCI1_CK */
|
|
|
|
#if defined(CONFIG_ATMEL_MCI_PORTB)
|
|
at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* MCI1_CDB */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* MCI1_DB0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 23, PUP); /* MCI1_DB1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 24, PUP); /* MCI1_DB2 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* MCI1_DB3 */
|
|
#else
|
|
at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* MCI1_CDA */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 8, PUP); /* MCI1_DA0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 9, PUP); /* MCI1_DA1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 10, PUP); /* MCI1_DA2 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 11, PUP); /* MCI1_DA3 */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
void at91_macb_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTE, 21, 0); /* ETXCK_EREFCK */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ERXDV */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 25, 0); /* ERX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 26, 0); /* ERX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 27, 0); /* ERXER */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 28, 0); /* ETXEN */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 23, 0); /* ETX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 24, 0); /* ETX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 30, 0); /* EMDIO */
|
|
at91_set_a_periph(AT91_PIO_PORTE, 29, 0); /* EMDC */
|
|
|
|
#ifndef CONFIG_RMII
|
|
at91_set_a_periph(AT91_PIO_PORTE, 22, 0); /* ECRS */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
void at91_uhp_hw_init(void)
|
|
{
|
|
/* Enable VBus on UHP ports */
|
|
at91_set_pio_output(AT91_PIO_PORTA, 21, 0);
|
|
at91_set_pio_output(AT91_PIO_PORTA, 24, 0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_AT91_CAN
|
|
void at91_can_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */
|
|
|
|
/* Enable clock */
|
|
writel(1 << ATMEL_ID_CAN, &pmc->pcer);
|
|
}
|
|
#endif
|