Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-13 06:42:56 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/ls1043ardb/ls1043ardb.c
Tom Rini 65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_* 
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00

421 lines
8.6 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015 Freescale Semiconductor, Inc.
* Copyright 2021-2022 NXP
*/
#include <common.h>
#include <i2c.h>
#include <init.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include <fdt_support.h>
#include <hwconfig.h>
#include <ahci.h>
#include <mmc.h>
#include <scsi.h>
#include <fm_eth.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
#include "cpld.h"
#ifdef CONFIG_U_QE
#include <fsl_qe.h>
#endif
#include <asm/arch/ppa.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_TFABOOT
struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
{
"nor",
CFG_SYS_NOR_CSPR,
CFG_SYS_NOR_CSPR_EXT,
CFG_SYS_NOR_AMASK,
CFG_SYS_NOR_CSOR,
{
CFG_SYS_NOR_FTIM0,
CFG_SYS_NOR_FTIM1,
CFG_SYS_NOR_FTIM2,
CFG_SYS_NOR_FTIM3
},
},
{
"nand",
CFG_SYS_NAND_CSPR,
CFG_SYS_NAND_CSPR_EXT,
CFG_SYS_NAND_AMASK,
CFG_SYS_NAND_CSOR,
{
CFG_SYS_NAND_FTIM0,
CFG_SYS_NAND_FTIM1,
CFG_SYS_NAND_FTIM2,
CFG_SYS_NAND_FTIM3
},
},
{
"cpld",
CFG_SYS_CPLD_CSPR,
CFG_SYS_CPLD_CSPR_EXT,
CFG_SYS_CPLD_AMASK,
CFG_SYS_CPLD_CSOR,
{
CFG_SYS_CPLD_FTIM0,
CFG_SYS_CPLD_FTIM1,
CFG_SYS_CPLD_FTIM2,
CFG_SYS_CPLD_FTIM3
},
}
};
struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
{
"nand",
CFG_SYS_NAND_CSPR,
CFG_SYS_NAND_CSPR_EXT,
CFG_SYS_NAND_AMASK,
CFG_SYS_NAND_CSOR,
{
CFG_SYS_NAND_FTIM0,
CFG_SYS_NAND_FTIM1,
CFG_SYS_NAND_FTIM2,
CFG_SYS_NAND_FTIM3
},
},
{
"nor",
CFG_SYS_NOR_CSPR,
CFG_SYS_NOR_CSPR_EXT,
CFG_SYS_NOR_AMASK,
CFG_SYS_NOR_CSOR,
{
CFG_SYS_NOR_FTIM0,
CFG_SYS_NOR_FTIM1,
CFG_SYS_NOR_FTIM2,
CFG_SYS_NOR_FTIM3
},
},
{
"cpld",
CFG_SYS_CPLD_CSPR,
CFG_SYS_CPLD_CSPR_EXT,
CFG_SYS_CPLD_AMASK,
CFG_SYS_CPLD_CSOR,
{
CFG_SYS_CPLD_FTIM0,
CFG_SYS_CPLD_FTIM1,
CFG_SYS_CPLD_FTIM2,
CFG_SYS_CPLD_FTIM3
},
}
};
void ifc_cfg_boot_info(struct ifc_regs_info *regs_info)
{
enum boot_src src = get_boot_src();
if (src == BOOT_SOURCE_IFC_NAND)
regs_info->regs = ifc_cfg_nand_boot;
else
regs_info->regs = ifc_cfg_nor_boot;
regs_info->cs_size = CONFIG_SYS_FSL_IFC_BANK_COUNT;
}
#endif
int board_early_init_f(void)
{
fsl_lsch2_early_init_f();
return 0;
}
#ifndef CONFIG_SPL_BUILD
int checkboard(void)
{
#ifdef CONFIG_TFABOOT
enum boot_src src = get_boot_src();
#endif
static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
#ifndef CONFIG_SD_BOOT
u8 cfg_rcw_src1, cfg_rcw_src2;
u16 cfg_rcw_src;
#endif
u8 sd1refclk_sel;
printf("Board: LS1043ARDB, boot from ");
#ifdef CONFIG_TFABOOT
if (src == BOOT_SOURCE_SD_MMC)
puts("SD\n");
else {
#endif
#ifdef CONFIG_SD_BOOT
puts("SD\n");
#else
cfg_rcw_src1 = CPLD_READ(cfg_rcw_src1);
cfg_rcw_src2 = CPLD_READ(cfg_rcw_src2);
cpld_rev_bit(&cfg_rcw_src1);
cfg_rcw_src = cfg_rcw_src1;
cfg_rcw_src = (cfg_rcw_src << 1) | cfg_rcw_src2;
if (cfg_rcw_src == 0x25)
printf("vBank %d\n", CPLD_READ(vbank));
else if ((cfg_rcw_src == 0x106) || (cfg_rcw_src == 0x118))
puts("NAND\n");
else
printf("Invalid setting of SW4\n");
#endif
#ifdef CONFIG_TFABOOT
}
#endif
printf("CPLD: V%x.%x\nPCBA: V%x.0\n", CPLD_READ(cpld_ver),
CPLD_READ(cpld_ver_sub), CPLD_READ(pcba_ver));
puts("SERDES Reference Clocks:\n");
sd1refclk_sel = CPLD_READ(sd1refclk_sel);
printf("SD1_CLK1 = %s, SD1_CLK2 = %s\n", freq[sd1refclk_sel], freq[0]);
return 0;
}
int board_init(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
erratum_a010315();
#endif
#ifdef CONFIG_FSL_IFC
init_final_memctl_regs();
#endif
#ifdef CONFIG_NXP_ESBC
/* In case of Secure Boot, the IBR configures the SMMU
* to allow only Secure transactions.
* SMMU must be reset in bypass mode.
* Set the ClientPD bit and Clear the USFCFG Bit
*/
u32 val;
val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
out_le32(SMMU_SCR0, val);
val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
out_le32(SMMU_NSCR0, val);
#endif
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
pci_init();
#endif
#ifdef CONFIG_U_QE
u_qe_init();
#endif
/* invert AQR105 IRQ pins polarity */
out_be32(&scfg->intpcr, AQR105_IRQ_MASK);
return 0;
}
int config_board_mux(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
u32 usb_pwrfault;
if (hwconfig("qe-hdlc")) {
out_be32(&scfg->rcwpmuxcr0,
(in_be32(&scfg->rcwpmuxcr0) & ~0xff00) | 0x6600);
printf("Assign to qe-hdlc clk, rcwpmuxcr0=%x\n",
in_be32(&scfg->rcwpmuxcr0));
} else {
#ifdef CONFIG_HAS_FSL_XHCI_USB
out_be32(&scfg->rcwpmuxcr0, 0x3333);
out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
SCFG_USBPWRFAULT_USB3_SHIFT) |
(SCFG_USBPWRFAULT_DEDICATED <<
SCFG_USBPWRFAULT_USB2_SHIFT) |
(SCFG_USBPWRFAULT_SHARED <<
SCFG_USBPWRFAULT_USB1_SHIFT);
out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
#endif
}
return 0;
}
#if defined(CONFIG_MISC_INIT_R)
int misc_init_r(void)
{
config_board_mux();
return 0;
}
#endif
void fdt_del_qe(void *blob)
{
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
"fsl,qe")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
/* Update the address of the Aquantia PHY on the MDIO bus for boards revision
* v7.0 and up. Also rename the PHY node to align with the address change.
*/
void fdt_fixup_phy_addr(void *blob)
{
const char phy_path[] =
"/soc/fman@1a00000/mdio@fd000/ethernet-phy@1";
int ret, offset, new_addr = AQR113C_PHY_ADDR;
char new_name[] = "ethernet-phy@00";
if (CPLD_READ(pcba_ver) < 0x7)
return;
offset = fdt_path_offset(blob, phy_path);
if (offset < 0) {
printf("ethernet-phy@1 node not found in the dts\n");
return;
}
ret = fdt_setprop_u32(blob, offset, "reg", new_addr);
if (ret < 0) {
printf("Unable to set 'reg' for node ethernet-phy@1: %s\n",
fdt_strerror(ret));
return;
}
sprintf(new_name, "ethernet-phy@%x", new_addr);
ret = fdt_set_name(blob, offset, new_name);
if (ret < 0)
printf("Unable to rename node ethernet-phy@1: %s\n",
fdt_strerror(ret));
}
int ft_board_setup(void *blob, struct bd_info *bd)
{
u64 base[CONFIG_NR_DRAM_BANKS];
u64 size[CONFIG_NR_DRAM_BANKS];
/* fixup DT for the two DDR banks */
base[0] = gd->bd->bi_dram[0].start;
size[0] = gd->bd->bi_dram[0].size;
base[1] = gd->bd->bi_dram[1].start;
size[1] = gd->bd->bi_dram[1].size;
fdt_fixup_memory_banks(blob, base, size, 2);
ft_cpu_setup(blob, bd);
#ifdef CONFIG_SYS_DPAA_FMAN
#ifndef CONFIG_DM_ETH
fdt_fixup_fman_ethernet(blob);
#endif
fdt_fixup_phy_addr(blob);
#endif
fdt_fixup_icid(blob);
/*
* qe-hdlc and usb multi-use the pins,
* when set hwconfig to qe-hdlc, delete usb node.
*/
if (hwconfig("qe-hdlc"))
#ifdef CONFIG_HAS_FSL_XHCI_USB
fdt_del_node_and_alias(blob, "usb1");
#endif
/*
* qe just support qe-uart and qe-hdlc,
* if qe-uart and qe-hdlc are not set in hwconfig,
* delete qe node.
*/
if (!hwconfig("qe-uart") && !hwconfig("qe-hdlc"))
fdt_del_qe(blob);
return 0;
}
void nand_fixup(void)
{
u32 csor = 0;
if (CPLD_READ(pcba_ver) < 0x7)
return;
/* Change NAND Flash PGS/SPRZ configuration */
csor = CFG_SYS_NAND_CSOR;
if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K)
csor = (csor & ~(CSOR_NAND_PGS_MASK)) | CSOR_NAND_PGS_4K;
if ((csor & CSOR_NAND_SPRZ_MASK) == CSOR_NAND_SPRZ_64)
csor = (csor & ~(CSOR_NAND_SPRZ_MASK)) | CSOR_NAND_SPRZ_224;
if (IS_ENABLED(CONFIG_TFABOOT)) {
u8 cfg_rcw_src1, cfg_rcw_src2;
u16 cfg_rcw_src;
cfg_rcw_src1 = CPLD_READ(cfg_rcw_src1);
cfg_rcw_src2 = CPLD_READ(cfg_rcw_src2);
cpld_rev_bit(&cfg_rcw_src1);
cfg_rcw_src = cfg_rcw_src1;
cfg_rcw_src = (cfg_rcw_src << 1) | cfg_rcw_src2;
if (cfg_rcw_src == 0x25)
set_ifc_csor(IFC_CS1, csor);
else if (cfg_rcw_src == 0x118)
set_ifc_csor(IFC_CS0, csor);
else
printf("Invalid setting\n");
} else {
if (IS_ENABLED(CONFIG_NAND_BOOT))
set_ifc_csor(IFC_CS0, csor);
else
set_ifc_csor(IFC_CS1, csor);
}
}
#if IS_ENABLED(CONFIG_OF_BOARD_FIXUP)
int board_fix_fdt(void *blob)
{
/* nand driver fix up */
nand_fixup();
/* fdt fix up */
fdt_fixup_phy_addr(blob);
return 0;
}
#endif
u8 flash_read8(void *addr)
{
return __raw_readb(addr + 1);
}
void flash_write16(u16 val, void *addr)
{
u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
__raw_writew(shftval, addr);
}
u16 flash_read16(void *addr)
{
u16 val = __raw_readw(addr);
return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
}
#endif
Reference in a new issue View git blame Copy permalink