mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
f7ae49fc4f
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
292 lines
7.6 KiB
C
292 lines
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2006
|
|
* Markus Klotzbuecher, mk@denx.de
|
|
*
|
|
* (C) Copyright 2019 NXP
|
|
* Chuanhua Han <chuanhua.han@nxp.com>
|
|
*/
|
|
|
|
/*
|
|
* Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
|
|
* Extremly Accurate DS3231 Real Time Clock (RTC).
|
|
*
|
|
* copied from ds1337.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <rtc.h>
|
|
#include <i2c.h>
|
|
|
|
/*
|
|
* RTC register addresses
|
|
*/
|
|
#define RTC_SEC_REG_ADDR 0x0
|
|
#define RTC_MIN_REG_ADDR 0x1
|
|
#define RTC_HR_REG_ADDR 0x2
|
|
#define RTC_DAY_REG_ADDR 0x3
|
|
#define RTC_DATE_REG_ADDR 0x4
|
|
#define RTC_MON_REG_ADDR 0x5
|
|
#define RTC_YR_REG_ADDR 0x6
|
|
#define RTC_CTL_REG_ADDR 0x0e
|
|
#define RTC_STAT_REG_ADDR 0x0f
|
|
|
|
|
|
/*
|
|
* RTC control register bits
|
|
*/
|
|
#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */
|
|
#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */
|
|
#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */
|
|
#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */
|
|
#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */
|
|
#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */
|
|
|
|
/*
|
|
* RTC status register bits
|
|
*/
|
|
#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */
|
|
#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */
|
|
#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */
|
|
#define RTC_STAT_BIT_BB32KHZ 0x40 /* Battery backed 32KHz Output */
|
|
#define RTC_STAT_BIT_EN32KHZ 0x8 /* Enable 32KHz Output */
|
|
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_RTC)
|
|
static uchar rtc_read (uchar reg);
|
|
static void rtc_write (uchar reg, uchar val);
|
|
|
|
|
|
/*
|
|
* Get the current time from the RTC
|
|
*/
|
|
int rtc_get (struct rtc_time *tmp)
|
|
{
|
|
int rel = 0;
|
|
uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
|
|
|
|
control = rtc_read (RTC_CTL_REG_ADDR);
|
|
status = rtc_read (RTC_STAT_REG_ADDR);
|
|
sec = rtc_read (RTC_SEC_REG_ADDR);
|
|
min = rtc_read (RTC_MIN_REG_ADDR);
|
|
hour = rtc_read (RTC_HR_REG_ADDR);
|
|
wday = rtc_read (RTC_DAY_REG_ADDR);
|
|
mday = rtc_read (RTC_DATE_REG_ADDR);
|
|
mon_cent = rtc_read (RTC_MON_REG_ADDR);
|
|
year = rtc_read (RTC_YR_REG_ADDR);
|
|
|
|
debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
|
|
"hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
|
|
year, mon_cent, mday, wday, hour, min, sec, control, status);
|
|
|
|
if (status & RTC_STAT_BIT_OSF) {
|
|
printf ("### Warning: RTC oscillator has stopped\n");
|
|
/* clear the OSF flag */
|
|
rtc_write (RTC_STAT_REG_ADDR,
|
|
rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
|
|
rel = -1;
|
|
}
|
|
|
|
tmp->tm_sec = bcd2bin (sec & 0x7F);
|
|
tmp->tm_min = bcd2bin (min & 0x7F);
|
|
tmp->tm_hour = bcd2bin (hour & 0x3F);
|
|
tmp->tm_mday = bcd2bin (mday & 0x3F);
|
|
tmp->tm_mon = bcd2bin (mon_cent & 0x1F);
|
|
tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
|
|
tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
|
|
tmp->tm_yday = 0;
|
|
tmp->tm_isdst= 0;
|
|
|
|
debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return rel;
|
|
}
|
|
|
|
|
|
/*
|
|
* Set the RTC
|
|
*/
|
|
int rtc_set (struct rtc_time *tmp)
|
|
{
|
|
uchar century;
|
|
|
|
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
|
|
|
|
century = (tmp->tm_year >= 2000) ? 0x80 : 0;
|
|
rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century);
|
|
|
|
rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
|
|
rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
|
|
rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
|
|
rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
|
|
rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Reset the RTC. We also enable the oscillator output on the
|
|
* SQW/INTB* pin and program it for 32,768 Hz output. Note that
|
|
* according to the datasheet, turning on the square wave output
|
|
* increases the current drain on the backup battery from about
|
|
* 600 nA to 2uA.
|
|
*/
|
|
void rtc_reset (void)
|
|
{
|
|
rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2);
|
|
}
|
|
|
|
/*
|
|
* Enable 32KHz output
|
|
*/
|
|
#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
|
|
void rtc_enable_32khz_output(void)
|
|
{
|
|
rtc_write(RTC_STAT_REG_ADDR,
|
|
RTC_STAT_BIT_BB32KHZ | RTC_STAT_BIT_EN32KHZ);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Helper functions
|
|
*/
|
|
|
|
static
|
|
uchar rtc_read (uchar reg)
|
|
{
|
|
return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
|
|
}
|
|
|
|
|
|
static void rtc_write (uchar reg, uchar val)
|
|
{
|
|
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
|
|
}
|
|
#else
|
|
static int ds3231_rtc_get(struct udevice *dev, struct rtc_time *tmp)
|
|
{
|
|
uchar sec, min, hour, mday, wday, mon_cent, year, status;
|
|
|
|
status = dm_i2c_reg_read(dev, RTC_STAT_REG_ADDR);
|
|
sec = dm_i2c_reg_read(dev, RTC_SEC_REG_ADDR);
|
|
min = dm_i2c_reg_read(dev, RTC_MIN_REG_ADDR);
|
|
hour = dm_i2c_reg_read(dev, RTC_HR_REG_ADDR);
|
|
wday = dm_i2c_reg_read(dev, RTC_DAY_REG_ADDR);
|
|
mday = dm_i2c_reg_read(dev, RTC_DATE_REG_ADDR);
|
|
mon_cent = dm_i2c_reg_read(dev, RTC_MON_REG_ADDR);
|
|
year = dm_i2c_reg_read(dev, RTC_YR_REG_ADDR);
|
|
|
|
if (status & RTC_STAT_BIT_OSF) {
|
|
printf("### Warning: RTC oscillator has stopped\n");
|
|
/* clear the OSF flag */
|
|
dm_i2c_reg_write(dev, RTC_STAT_REG_ADDR,
|
|
dm_i2c_reg_read(dev, RTC_STAT_REG_ADDR)
|
|
& ~RTC_STAT_BIT_OSF);
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp->tm_sec = bcd2bin(sec & 0x7F);
|
|
tmp->tm_min = bcd2bin(min & 0x7F);
|
|
tmp->tm_hour = bcd2bin(hour & 0x3F);
|
|
tmp->tm_mday = bcd2bin(mday & 0x3F);
|
|
tmp->tm_mon = bcd2bin(mon_cent & 0x1F);
|
|
tmp->tm_year = bcd2bin(year) + ((mon_cent & 0x80) ? 2000 : 1900);
|
|
tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
|
|
tmp->tm_yday = 0;
|
|
tmp->tm_isdst = 0;
|
|
|
|
debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds3231_rtc_set(struct udevice *dev, const struct rtc_time *tmp)
|
|
{
|
|
uchar century;
|
|
|
|
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
dm_i2c_reg_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
|
|
|
|
century = (tmp->tm_year >= 2000) ? 0x80 : 0;
|
|
dm_i2c_reg_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon) | century);
|
|
|
|
dm_i2c_reg_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
|
|
dm_i2c_reg_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
|
|
dm_i2c_reg_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
|
|
dm_i2c_reg_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
|
|
dm_i2c_reg_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds3231_rtc_reset(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
|
|
ret = dm_i2c_reg_write(dev, RTC_CTL_REG_ADDR,
|
|
RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds3231_probe(struct udevice *dev)
|
|
{
|
|
i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS |
|
|
DM_I2C_CHIP_WR_ADDRESS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
|
|
int rtc_enable_32khz_output(int busnum, int chip_addr)
|
|
{
|
|
int ret;
|
|
struct udevice *dev;
|
|
|
|
ret = i2c_get_chip_for_busnum(busnum, chip_addr, 1, &dev);
|
|
if (!ret) {
|
|
ret = dm_i2c_reg_write(dev, RTC_STAT_REG_ADDR,
|
|
RTC_STAT_BIT_BB32KHZ |
|
|
RTC_STAT_BIT_EN32KHZ);
|
|
}
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct rtc_ops ds3231_rtc_ops = {
|
|
.get = ds3231_rtc_get,
|
|
.set = ds3231_rtc_set,
|
|
.reset = ds3231_rtc_reset,
|
|
};
|
|
|
|
static const struct udevice_id ds3231_rtc_ids[] = {
|
|
{ .compatible = "dallas,ds3231" },
|
|
{ .compatible = "dallas,ds3232" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rtc_ds3231) = {
|
|
.name = "rtc-ds3231",
|
|
.id = UCLASS_RTC,
|
|
.probe = ds3231_probe,
|
|
.of_match = ds3231_rtc_ids,
|
|
.ops = &ds3231_rtc_ops,
|
|
};
|
|
#endif
|