mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
3d15245502
Define in the RCC clock provider node which root clocks the driver depends on. These are root oscillators, which may be present or not, upon FDT content. This update binding is introduced in Linux kernel device tree by patch "ARM: dts: stm32: move clocks/resets to SCMI resources for stm32mp15" This patch is a preliminary step for SCMI support of stm32mp15 boards with trusted boot chain, based on TF-A or OP-TEE. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
1799 lines
42 KiB
Text
1799 lines
42 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
|
|
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
|
|
*/
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset/stm32mp1-resets.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a7";
|
|
clock-frequency = <650000000>;
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
operating-points-v2 = <&cpu0_opp_table>;
|
|
nvmem-cells = <&part_number_otp>;
|
|
nvmem-cell-names = "part_number";
|
|
};
|
|
};
|
|
|
|
cpu0_opp_table: cpu0-opp-table {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
opp-650000000 {
|
|
opp-hz = /bits/ 64 <650000000>;
|
|
opp-microvolt = <1200000>;
|
|
opp-supported-hw = <0x1>;
|
|
};
|
|
opp-800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
opp-microvolt = <1350000>;
|
|
opp-supported-hw = <0x2>;
|
|
};
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>;
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
intc: interrupt-controller@a0021000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xa0021000 0x1000>,
|
|
<0xa0022000 0x2000>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
|
|
clocks {
|
|
clk_hse: clk-hse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
clk_hsi: clk-hsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <64000000>;
|
|
};
|
|
|
|
clk_lse: clk-lse {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
clk_lsi: clk-lsi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
};
|
|
|
|
clk_csi: clk-csi {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <4000000>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&dts>;
|
|
|
|
trips {
|
|
cpu_alert1: cpu-alert1 {
|
|
temperature = <85000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu-crit {
|
|
temperature = <120000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
};
|
|
};
|
|
};
|
|
|
|
booster: regulator-booster {
|
|
compatible = "st,stm32mp1-booster";
|
|
st,syscfg = <&syscfg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
timers2: timer@40000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40000000 0x400>;
|
|
clocks = <&rcc TIM2_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 18 0x400 0x1>,
|
|
<&dmamux1 19 0x400 0x1>,
|
|
<&dmamux1 20 0x400 0x1>,
|
|
<&dmamux1 21 0x400 0x1>,
|
|
<&dmamux1 22 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4", "up";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@1 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers3: timer@40001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40001000 0x400>;
|
|
clocks = <&rcc TIM3_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 23 0x400 0x1>,
|
|
<&dmamux1 24 0x400 0x1>,
|
|
<&dmamux1 25 0x400 0x1>,
|
|
<&dmamux1 26 0x400 0x1>,
|
|
<&dmamux1 27 0x400 0x1>,
|
|
<&dmamux1 28 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@2 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers4: timer@40002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40002000 0x400>;
|
|
clocks = <&rcc TIM4_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 29 0x400 0x1>,
|
|
<&dmamux1 30 0x400 0x1>,
|
|
<&dmamux1 31 0x400 0x1>,
|
|
<&dmamux1 32 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@3 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers5: timer@40003000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40003000 0x400>;
|
|
clocks = <&rcc TIM5_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 55 0x400 0x1>,
|
|
<&dmamux1 56 0x400 0x1>,
|
|
<&dmamux1 57 0x400 0x1>,
|
|
<&dmamux1 58 0x400 0x1>,
|
|
<&dmamux1 59 0x400 0x1>,
|
|
<&dmamux1 60 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@4 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers6: timer@40004000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40004000 0x400>;
|
|
clocks = <&rcc TIM6_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 69 0x400 0x1>;
|
|
dma-names = "up";
|
|
status = "disabled";
|
|
|
|
timer@5 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <5>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers7: timer@40005000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40005000 0x400>;
|
|
clocks = <&rcc TIM7_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 70 0x400 0x1>;
|
|
dma-names = "up";
|
|
status = "disabled";
|
|
|
|
timer@6 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <6>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers12: timer@40006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40006000 0x400>;
|
|
clocks = <&rcc TIM12_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@11 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <11>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers13: timer@40007000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40007000 0x400>;
|
|
clocks = <&rcc TIM13_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@12 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <12>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers14: timer@40008000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x40008000 0x400>;
|
|
clocks = <&rcc TIM14_K>;
|
|
clock-names = "int";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@13 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <13>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer1: timer@40009000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x40009000 0x400>;
|
|
interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LPTIM1_K>;
|
|
clock-names = "mux";
|
|
wakeup-source;
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@0 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-lptimer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi2: spi@4000b000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x4000b000 0x400>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI2_K>;
|
|
resets = <&rcc SPI2_R>;
|
|
dmas = <&dmamux1 39 0x400 0x05>,
|
|
<&dmamux1 40 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: audio-controller@4000b000 {
|
|
compatible = "st,stm32h7-i2s";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x4000b000 0x400>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 39 0x400 0x01>,
|
|
<&dmamux1 40 0x400 0x01>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi3: spi@4000c000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x4000c000 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI3_K>;
|
|
resets = <&rcc SPI3_R>;
|
|
dmas = <&dmamux1 61 0x400 0x05>,
|
|
<&dmamux1 62 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s3: audio-controller@4000c000 {
|
|
compatible = "st,stm32h7-i2s";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x4000c000 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 61 0x400 0x01>,
|
|
<&dmamux1 62 0x400 0x01>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spdifrx: audio-controller@4000d000 {
|
|
compatible = "st,stm32h7-spdifrx";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x4000d000 0x400>;
|
|
clocks = <&rcc SPDIF_K>;
|
|
clock-names = "kclk";
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 93 0x400 0x01>,
|
|
<&dmamux1 94 0x400 0x01>;
|
|
dma-names = "rx", "rx-ctrl";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart2: serial@4000e000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x4000e000 0x400>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART2_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usart3: serial@4000f000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x4000f000 0x400>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART3_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@40010000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40010000 0x400>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART4_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@40011000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40011000 0x400>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART5_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@40012000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40012000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C1_K>;
|
|
resets = <&rcc I2C1_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x1>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@40013000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40013000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C2_K>;
|
|
resets = <&rcc I2C2_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x2>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@40014000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40014000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C3_K>;
|
|
resets = <&rcc I2C3_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x4>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@40015000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x40015000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C5_K>;
|
|
resets = <&rcc I2C5_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x10>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
cec: cec@40016000 {
|
|
compatible = "st,stm32-cec";
|
|
reg = <0x40016000 0x400>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc CEC_K>, <&clk_lse>;
|
|
clock-names = "cec", "hdmi-cec";
|
|
status = "disabled";
|
|
};
|
|
|
|
dac: dac@40017000 {
|
|
compatible = "st,stm32h7-dac-core";
|
|
reg = <0x40017000 0x400>;
|
|
clocks = <&rcc DAC12>;
|
|
clock-names = "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
dac1: dac@1 {
|
|
compatible = "st,stm32-dac";
|
|
#io-channel-cells = <1>;
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dac2: dac@2 {
|
|
compatible = "st,stm32-dac";
|
|
#io-channel-cells = <1>;
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
uart7: serial@40018000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40018000 0x400>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART7_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart8: serial@40019000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x40019000 0x400>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc UART8_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timers1: timer@44000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44000000 0x400>;
|
|
clocks = <&rcc TIM1_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 11 0x400 0x1>,
|
|
<&dmamux1 12 0x400 0x1>,
|
|
<&dmamux1 13 0x400 0x1>,
|
|
<&dmamux1 14 0x400 0x1>,
|
|
<&dmamux1 15 0x400 0x1>,
|
|
<&dmamux1 16 0x400 0x1>,
|
|
<&dmamux1 17 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4",
|
|
"up", "trig", "com";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@0 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers8: timer@44001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44001000 0x400>;
|
|
clocks = <&rcc TIM8_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 47 0x400 0x1>,
|
|
<&dmamux1 48 0x400 0x1>,
|
|
<&dmamux1 49 0x400 0x1>,
|
|
<&dmamux1 50 0x400 0x1>,
|
|
<&dmamux1 51 0x400 0x1>,
|
|
<&dmamux1 52 0x400 0x1>,
|
|
<&dmamux1 53 0x400 0x1>;
|
|
dma-names = "ch1", "ch2", "ch3", "ch4",
|
|
"up", "trig", "com";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@7 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-timer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usart6: serial@44003000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x44003000 0x400>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART6_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@44004000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x44004000 0x400>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI1_K>;
|
|
resets = <&rcc SPI1_R>;
|
|
dmas = <&dmamux1 37 0x400 0x05>,
|
|
<&dmamux1 38 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s1: audio-controller@44004000 {
|
|
compatible = "st,stm32h7-i2s";
|
|
#sound-dai-cells = <0>;
|
|
reg = <0x44004000 0x400>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 37 0x400 0x01>,
|
|
<&dmamux1 38 0x400 0x01>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi4: spi@44005000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x44005000 0x400>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI4_K>;
|
|
resets = <&rcc SPI4_R>;
|
|
dmas = <&dmamux1 83 0x400 0x05>,
|
|
<&dmamux1 84 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
timers15: timer@44006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44006000 0x400>;
|
|
clocks = <&rcc TIM15_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 105 0x400 0x1>,
|
|
<&dmamux1 106 0x400 0x1>,
|
|
<&dmamux1 107 0x400 0x1>,
|
|
<&dmamux1 108 0x400 0x1>;
|
|
dma-names = "ch1", "up", "trig", "com";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@14 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <14>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers16: timer@44007000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44007000 0x400>;
|
|
clocks = <&rcc TIM16_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 109 0x400 0x1>,
|
|
<&dmamux1 110 0x400 0x1>;
|
|
dma-names = "ch1", "up";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
timer@15 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <15>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
timers17: timer@44008000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-timers";
|
|
reg = <0x44008000 0x400>;
|
|
clocks = <&rcc TIM17_K>;
|
|
clock-names = "int";
|
|
dmas = <&dmamux1 111 0x400 0x1>,
|
|
<&dmamux1 112 0x400 0x1>;
|
|
dma-names = "ch1", "up";
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@16 {
|
|
compatible = "st,stm32h7-timer-trigger";
|
|
reg = <16>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi5: spi@44009000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x44009000 0x400>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI5_K>;
|
|
resets = <&rcc SPI5_R>;
|
|
dmas = <&dmamux1 85 0x400 0x05>,
|
|
<&dmamux1 86 0x400 0x05>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sai1: sai@4400a000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4400a000 0x400>;
|
|
reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI1_R>;
|
|
status = "disabled";
|
|
|
|
sai1a: audio-controller@4400a004 {
|
|
#sound-dai-cells = <0>;
|
|
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x4 0x1c>;
|
|
clocks = <&rcc SAI1_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 87 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai1b: audio-controller@4400a024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI1_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 88 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sai2: sai@4400b000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4400b000 0x400>;
|
|
reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI2_R>;
|
|
status = "disabled";
|
|
|
|
sai2a: audio-controller@4400b004 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x4 0x1c>;
|
|
clocks = <&rcc SAI2_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 89 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2b: audio-controller@4400b024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI2_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 90 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sai3: sai@4400c000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x4400c000 0x400>;
|
|
reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI3_R>;
|
|
status = "disabled";
|
|
|
|
sai3a: audio-controller@4400c004 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x04 0x1c>;
|
|
clocks = <&rcc SAI3_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 113 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai3b: audio-controller@4400c024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI3_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 114 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dfsdm: dfsdm@4400d000 {
|
|
compatible = "st,stm32mp1-dfsdm";
|
|
reg = <0x4400d000 0x800>;
|
|
clocks = <&rcc DFSDM_K>;
|
|
clock-names = "dfsdm";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
dfsdm0: filter@0 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0>;
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 101 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm1: filter@1 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <1>;
|
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 102 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm2: filter@2 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <2>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 103 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm3: filter@3 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <3>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 104 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm4: filter@4 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <4>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 91 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
dfsdm5: filter@5 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <5>;
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&dmamux1 92 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dma1: dma-controller@48000000 {
|
|
compatible = "st,stm32-dma";
|
|
reg = <0x48000000 0x400>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc DMA1>;
|
|
resets = <&rcc DMA1_R>;
|
|
#dma-cells = <4>;
|
|
st,mem2mem;
|
|
dma-requests = <8>;
|
|
};
|
|
|
|
dma2: dma-controller@48001000 {
|
|
compatible = "st,stm32-dma";
|
|
reg = <0x48001000 0x400>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc DMA2>;
|
|
resets = <&rcc DMA2_R>;
|
|
#dma-cells = <4>;
|
|
st,mem2mem;
|
|
dma-requests = <8>;
|
|
};
|
|
|
|
dmamux1: dma-router@48002000 {
|
|
compatible = "st,stm32h7-dmamux";
|
|
reg = <0x48002000 0x40>;
|
|
#dma-cells = <3>;
|
|
dma-requests = <128>;
|
|
dma-masters = <&dma1 &dma2>;
|
|
dma-channels = <16>;
|
|
clocks = <&rcc DMAMUX>;
|
|
resets = <&rcc DMAMUX_R>;
|
|
};
|
|
|
|
adc: adc@48003000 {
|
|
compatible = "st,stm32mp1-adc-core";
|
|
reg = <0x48003000 0x400>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc ADC12>, <&rcc ADC12_K>;
|
|
clock-names = "bus", "adc";
|
|
interrupt-controller;
|
|
st,syscfg = <&syscfg>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
adc1: adc@0 {
|
|
compatible = "st,stm32mp1-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0x0>;
|
|
interrupt-parent = <&adc>;
|
|
interrupts = <0>;
|
|
dmas = <&dmamux1 9 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
adc2: adc@100 {
|
|
compatible = "st,stm32mp1-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0x100>;
|
|
interrupt-parent = <&adc>;
|
|
interrupts = <1>;
|
|
dmas = <&dmamux1 10 0x400 0x01>;
|
|
dma-names = "rx";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sdmmc3: sdmmc@48004000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00253180>;
|
|
reg = <0x48004000 0x400>;
|
|
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&rcc SDMMC3_K>;
|
|
clock-names = "apb_pclk";
|
|
resets = <&rcc SDMMC3_R>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbotg_hs: usb-otg@49000000 {
|
|
compatible = "st,stm32mp15-hsotg", "snps,dwc2";
|
|
reg = <0x49000000 0x10000>;
|
|
clocks = <&rcc USBO_K>;
|
|
clock-names = "otg";
|
|
resets = <&rcc USBO_R>;
|
|
reset-names = "dwc2";
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
g-rx-fifo-size = <512>;
|
|
g-np-tx-fifo-size = <32>;
|
|
g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
|
|
dr_mode = "otg";
|
|
usb33d-supply = <&usb33>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hwspinlock: hwspinlock@4c000000 {
|
|
compatible = "st,stm32-hwspinlock";
|
|
#hwlock-cells = <1>;
|
|
reg = <0x4c000000 0x400>;
|
|
clocks = <&rcc HSEM>;
|
|
clock-names = "hwspinlock";
|
|
};
|
|
|
|
ipcc: mailbox@4c001000 {
|
|
compatible = "st,stm32mp1-ipcc";
|
|
#mbox-cells = <1>;
|
|
reg = <0x4c001000 0x400>;
|
|
st,proc-id = <0>;
|
|
interrupts-extended =
|
|
<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&exti 61 1>;
|
|
interrupt-names = "rx", "tx", "wakeup";
|
|
clocks = <&rcc IPCC>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
dcmi: dcmi@4c006000 {
|
|
compatible = "st,stm32-dcmi";
|
|
reg = <0x4c006000 0x400>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc CAMITF_R>;
|
|
clocks = <&rcc DCMI>;
|
|
clock-names = "mclk";
|
|
dmas = <&dmamux1 75 0x400 0x01>;
|
|
dma-names = "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
rcc: rcc@50000000 {
|
|
compatible = "st,stm32mp1-rcc", "syscon";
|
|
reg = <0x50000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
|
|
clock-names = "hse", "hsi", "csi", "lse", "lsi";
|
|
clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
|
|
<&clk_lse>, <&clk_lsi>;
|
|
};
|
|
|
|
pwr_regulators: pwr@50001000 {
|
|
compatible = "st,stm32mp1,pwr-reg";
|
|
reg = <0x50001000 0x10>;
|
|
|
|
reg11: reg11 {
|
|
regulator-name = "reg11";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
reg18: reg18 {
|
|
regulator-name = "reg18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
usb33: usb33 {
|
|
regulator-name = "usb33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
pwr_mcu: pwr_mcu@50001014 {
|
|
compatible = "st,stm32mp151-pwr-mcu", "syscon";
|
|
reg = <0x50001014 0x4>;
|
|
};
|
|
|
|
exti: interrupt-controller@5000d000 {
|
|
compatible = "st,stm32mp1-exti", "syscon";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x5000d000 0x400>;
|
|
};
|
|
|
|
syscfg: syscon@50020000 {
|
|
compatible = "st,stm32mp157-syscfg", "syscon";
|
|
reg = <0x50020000 0x400>;
|
|
clocks = <&rcc SYSCFG>;
|
|
};
|
|
|
|
lptimer2: timer@50021000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50021000 0x400>;
|
|
interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LPTIM2_K>;
|
|
clock-names = "mux";
|
|
wakeup-source;
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@1 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter {
|
|
compatible = "st,stm32-lptimer-counter";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer3: timer@50022000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50022000 0x400>;
|
|
interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LPTIM3_K>;
|
|
clock-names = "mux";
|
|
wakeup-source;
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
trigger@2 {
|
|
compatible = "st,stm32-lptimer-trigger";
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer4: timer@50023000 {
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50023000 0x400>;
|
|
interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LPTIM4_K>;
|
|
clock-names = "mux";
|
|
wakeup-source;
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
lptimer5: timer@50024000 {
|
|
compatible = "st,stm32-lptimer";
|
|
reg = <0x50024000 0x400>;
|
|
interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LPTIM5_K>;
|
|
clock-names = "mux";
|
|
wakeup-source;
|
|
status = "disabled";
|
|
|
|
pwm {
|
|
compatible = "st,stm32-pwm-lp";
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
vrefbuf: vrefbuf@50025000 {
|
|
compatible = "st,stm32-vrefbuf";
|
|
reg = <0x50025000 0x8>;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
clocks = <&rcc VREF>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai4: sai@50027000 {
|
|
compatible = "st,stm32h7-sai";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x50027000 0x400>;
|
|
reg = <0x50027000 0x4>, <0x500273f0 0x10>;
|
|
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
|
|
resets = <&rcc SAI4_R>;
|
|
status = "disabled";
|
|
|
|
sai4a: audio-controller@50027004 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-a";
|
|
reg = <0x04 0x1c>;
|
|
clocks = <&rcc SAI4_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 99 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai4b: audio-controller@50027024 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "st,stm32-sai-sub-b";
|
|
reg = <0x24 0x1c>;
|
|
clocks = <&rcc SAI4_K>;
|
|
clock-names = "sai_ck";
|
|
dmas = <&dmamux1 100 0x400 0x01>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
dts: thermal@50028000 {
|
|
compatible = "st,stm32-thermal";
|
|
reg = <0x50028000 0x100>;
|
|
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc TMPSENS>;
|
|
clock-names = "pclk";
|
|
#thermal-sensor-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hash1: hash@54002000 {
|
|
compatible = "st,stm32f756-hash";
|
|
reg = <0x54002000 0x400>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc HASH1>;
|
|
resets = <&rcc HASH1_R>;
|
|
dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
|
|
dma-names = "in";
|
|
dma-maxburst = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
rng1: rng@54003000 {
|
|
compatible = "st,stm32-rng";
|
|
reg = <0x54003000 0x400>;
|
|
clocks = <&rcc RNG1_K>;
|
|
resets = <&rcc RNG1_R>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdma1: dma-controller@58000000 {
|
|
compatible = "st,stm32h7-mdma";
|
|
reg = <0x58000000 0x1000>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc MDMA>;
|
|
resets = <&rcc MDMA_R>;
|
|
#dma-cells = <5>;
|
|
dma-channels = <32>;
|
|
dma-requests = <48>;
|
|
};
|
|
|
|
fmc: memory-controller@58002000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "st,stm32mp1-fmc2-ebi";
|
|
reg = <0x58002000 0x1000>;
|
|
clocks = <&rcc FMC_K>;
|
|
resets = <&rcc FMC_R>;
|
|
status = "disabled";
|
|
|
|
ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
|
|
<1 0 0x64000000 0x04000000>, /* EBI CS 2 */
|
|
<2 0 0x68000000 0x04000000>, /* EBI CS 3 */
|
|
<3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
|
|
<4 0 0x80000000 0x10000000>; /* NAND */
|
|
|
|
nand-controller@4,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32mp1-fmc2-nfc";
|
|
reg = <4 0x00000000 0x1000>,
|
|
<4 0x08010000 0x1000>,
|
|
<4 0x08020000 0x1000>,
|
|
<4 0x01000000 0x1000>,
|
|
<4 0x09010000 0x1000>,
|
|
<4 0x09020000 0x1000>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
|
|
<&mdma1 20 0x2 0x12000a08 0x0 0x0>,
|
|
<&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
|
|
dma-names = "tx", "rx", "ecc";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
qspi: spi@58003000 {
|
|
compatible = "st,stm32f469-qspi";
|
|
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
|
|
reg-names = "qspi", "qspi_mm";
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
|
|
<&mdma1 22 0x2 0x100008 0x0 0x0>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&rcc QSPI_K>;
|
|
resets = <&rcc QSPI_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdmmc1: sdmmc@58005000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00253180>;
|
|
reg = <0x58005000 0x1000>;
|
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&rcc SDMMC1_K>;
|
|
clock-names = "apb_pclk";
|
|
resets = <&rcc SDMMC1_R>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdmmc2: sdmmc@58007000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00253180>;
|
|
reg = <0x58007000 0x1000>;
|
|
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&rcc SDMMC2_K>;
|
|
clock-names = "apb_pclk";
|
|
resets = <&rcc SDMMC2_R>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <120000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
crc1: crc@58009000 {
|
|
compatible = "st,stm32f7-crc";
|
|
reg = <0x58009000 0x400>;
|
|
clocks = <&rcc CRC1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
stmmac_axi_config_0: stmmac-axi-config {
|
|
snps,wr_osr_lmt = <0x7>;
|
|
snps,rd_osr_lmt = <0x7>;
|
|
snps,blen = <0 0 0 0 16 8 4>;
|
|
};
|
|
|
|
ethernet0: ethernet@5800a000 {
|
|
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
|
|
reg = <0x5800a000 0x2000>;
|
|
reg-names = "stmmaceth";
|
|
interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
clock-names = "stmmaceth",
|
|
"mac-clk-tx",
|
|
"mac-clk-rx",
|
|
"eth-ck",
|
|
"ethstp";
|
|
clocks = <&rcc ETHMAC>,
|
|
<&rcc ETHTX>,
|
|
<&rcc ETHRX>,
|
|
<&rcc ETHCK_K>,
|
|
<&rcc ETHSTP>;
|
|
st,syscon = <&syscfg 0x4>;
|
|
snps,mixed-burst;
|
|
snps,pbl = <2>;
|
|
snps,en-tx-lpi-clockgating;
|
|
snps,axi-config = <&stmmac_axi_config_0>;
|
|
snps,tso;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh_ohci: usb@5800c000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x5800c000 0x1000>;
|
|
clocks = <&rcc USBH>;
|
|
resets = <&rcc USBH_R>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh_ehci: usb@5800d000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x5800d000 0x1000>;
|
|
clocks = <&rcc USBH>;
|
|
resets = <&rcc USBH_R>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
companion = <&usbh_ohci>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ltdc: display-controller@5a001000 {
|
|
compatible = "st,stm32-ltdc";
|
|
reg = <0x5a001000 0x400>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc LTDC_PX>;
|
|
clock-names = "lcd";
|
|
resets = <&rcc LTDC_R>;
|
|
status = "disabled";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
iwdg2: watchdog@5a002000 {
|
|
compatible = "st,stm32mp1-iwdg";
|
|
reg = <0x5a002000 0x400>;
|
|
clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
|
|
clock-names = "pclk", "lsi";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphyc: usbphyc@5a006000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32mp1-usbphyc";
|
|
reg = <0x5a006000 0x1000>;
|
|
clocks = <&rcc USBPHY_K>;
|
|
resets = <&rcc USBPHY_R>;
|
|
vdda1v1-supply = <®11>;
|
|
vdda1v8-supply = <®18>;
|
|
status = "disabled";
|
|
|
|
usbphyc_port0: usb-phy@0 {
|
|
#phy-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
|
|
usbphyc_port1: usb-phy@1 {
|
|
#phy-cells = <1>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
usart1: serial@5c000000 {
|
|
compatible = "st,stm32h7-uart";
|
|
reg = <0x5c000000 0x400>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc USART1_K>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi6: spi@5c001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "st,stm32h7-spi";
|
|
reg = <0x5c001000 0x400>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc SPI6_K>;
|
|
resets = <&rcc SPI6_R>;
|
|
dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
|
|
<&mdma1 35 0x0 0x40002 0x0 0x0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@5c002000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x5c002000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C4_K>;
|
|
resets = <&rcc I2C4_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x8>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc: rtc@5c004000 {
|
|
compatible = "st,stm32mp1-rtc";
|
|
reg = <0x5c004000 0x400>;
|
|
clocks = <&rcc RTCAPB>, <&rcc RTC>;
|
|
clock-names = "pclk", "rtc_ck";
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
bsec: efuse@5c005000 {
|
|
compatible = "st,stm32mp15-bsec";
|
|
reg = <0x5c005000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
part_number_otp: part_number_otp@4 {
|
|
reg = <0x4 0x1>;
|
|
};
|
|
ts_cal1: calib@5c {
|
|
reg = <0x5c 0x2>;
|
|
};
|
|
ts_cal2: calib@5e {
|
|
reg = <0x5e 0x2>;
|
|
};
|
|
};
|
|
|
|
i2c6: i2c@5c009000 {
|
|
compatible = "st,stm32mp15-i2c";
|
|
reg = <0x5c009000 0x400>;
|
|
interrupt-names = "event", "error";
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rcc I2C6_K>;
|
|
resets = <&rcc I2C6_R>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
st,syscfg-fmp = <&syscfg 0x4 0x20>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
tamp: tamp@5c00a000 {
|
|
compatible = "st,stm32-tamp", "syscon", "simple-mfd";
|
|
reg = <0x5c00a000 0x400>;
|
|
};
|
|
|
|
/*
|
|
* Break node order to solve dependency probe issue between
|
|
* pinctrl and exti.
|
|
*/
|
|
pinctrl: pin-controller@50002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,stm32mp157-pinctrl";
|
|
ranges = <0 0x50002000 0xa400>;
|
|
interrupt-parent = <&exti>;
|
|
st,syscfg = <&exti 0x60 0xff>;
|
|
hwlocks = <&hwspinlock 0>;
|
|
pins-are-numbered;
|
|
|
|
gpioa: gpio@50002000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x400>;
|
|
clocks = <&rcc GPIOA>;
|
|
st,bank-name = "GPIOA";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiob: gpio@50003000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1000 0x400>;
|
|
clocks = <&rcc GPIOB>;
|
|
st,bank-name = "GPIOB";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioc: gpio@50004000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2000 0x400>;
|
|
clocks = <&rcc GPIOC>;
|
|
st,bank-name = "GPIOC";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiod: gpio@50005000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x3000 0x400>;
|
|
clocks = <&rcc GPIOD>;
|
|
st,bank-name = "GPIOD";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioe: gpio@50006000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x4000 0x400>;
|
|
clocks = <&rcc GPIOE>;
|
|
st,bank-name = "GPIOE";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiof: gpio@50007000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x5000 0x400>;
|
|
clocks = <&rcc GPIOF>;
|
|
st,bank-name = "GPIOF";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiog: gpio@50008000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x6000 0x400>;
|
|
clocks = <&rcc GPIOG>;
|
|
st,bank-name = "GPIOG";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioh: gpio@50009000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x7000 0x400>;
|
|
clocks = <&rcc GPIOH>;
|
|
st,bank-name = "GPIOH";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioi: gpio@5000a000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x8000 0x400>;
|
|
clocks = <&rcc GPIOI>;
|
|
st,bank-name = "GPIOI";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpioj: gpio@5000b000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x9000 0x400>;
|
|
clocks = <&rcc GPIOJ>;
|
|
st,bank-name = "GPIOJ";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpiok: gpio@5000c000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0xa000 0x400>;
|
|
clocks = <&rcc GPIOK>;
|
|
st,bank-name = "GPIOK";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pinctrl_z: pin-controller-z@54004000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,stm32mp157-z-pinctrl";
|
|
ranges = <0 0x54004000 0x400>;
|
|
pins-are-numbered;
|
|
interrupt-parent = <&exti>;
|
|
st,syscfg = <&exti 0x60 0xff>;
|
|
hwlocks = <&hwspinlock 0>;
|
|
|
|
gpioz: gpio@54004000 {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0 0x400>;
|
|
clocks = <&rcc GPIOZ>;
|
|
st,bank-name = "GPIOZ";
|
|
st,bank-ioport = <11>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
mlahb: ahb {
|
|
compatible = "st,mlahb", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
dma-ranges = <0x00000000 0x38000000 0x10000>,
|
|
<0x10000000 0x10000000 0x60000>,
|
|
<0x30000000 0x30000000 0x60000>;
|
|
|
|
m4_rproc: m4@10000000 {
|
|
compatible = "st,stm32mp1-m4";
|
|
reg = <0x10000000 0x40000>,
|
|
<0x30000000 0x40000>,
|
|
<0x38000000 0x10000>;
|
|
resets = <&rcc MCU_R>;
|
|
st,syscfg-holdboot = <&rcc 0x10C 0x1>;
|
|
st,syscfg-tz = <&rcc 0x000 0x1>;
|
|
st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
|
|
st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
|
|
st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|