mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
64272efdaf
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor series (GE Bx50). It consists of a carrier PCB used in combination with a Congatec QMX6 SoM. This adds U-Boot support using device model everywhere and SPL for memory initialization. Proper configuration is provided as 'ge_b1x5v2_defconfig' and the combined image u-boot-with-spi.imx can be flashed directly to 1024 byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can be loaded separately via USB-OTG using e.g. imx_usb. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
654 lines
14 KiB
Text
654 lines
14 KiB
Text
/*
|
|
* GE B1x5v2 Patient Monitor
|
|
*
|
|
* Copyright 2018-2020 GE Inc.
|
|
* Copyright 2018-2020 Collabora Ltd.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx6dl.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
compatible = "ge,imx6dl-b1x5v2", "congatec,qmx6", "fsl,imx6dl";
|
|
|
|
chosen {
|
|
bootargs = "console=ttymxc2,115200";
|
|
stdout-path = &uart3;
|
|
};
|
|
|
|
reg_3p3v: 3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v0_audio: regulator-5v0-audio {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V0_AUDIO";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_5v>;
|
|
|
|
gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
/*
|
|
* This must be always-on for da7212, which has some not properly
|
|
* documented dependencies for it's speaker supply pin. The issue
|
|
* manifests as speaker volume being very low.
|
|
*/
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_lcd: regulator-lcd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LED_VCC";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
|
|
pinctrl-0 = <&pinctrl_q7_lcd_power>;
|
|
pinctrl-names = "default";
|
|
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; // LCDPWR
|
|
enable-active-high;
|
|
};
|
|
|
|
usb_power: regulator-usb-power {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "USB POWER";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <®_5v>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_backlight_enable>;
|
|
power-supply = <®_lcd>;
|
|
pwms = <&pwm4 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
panel {
|
|
compatible = "simple-panel";
|
|
backlight = <&backlight>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&lvds0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
bootcount {
|
|
compatible = "u-boot,bootcount-spi-flash";
|
|
spi-flash = <&flash>;
|
|
offset = <0x01003fe>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
|
|
|
|
alarm1 {
|
|
label = "alarm:red";
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
alarm2 {
|
|
label = "alarm:yellow";
|
|
gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
alarm3 {
|
|
label = "alarm:blue";
|
|
gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_spi_cs1>;
|
|
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
|
|
active-delay-ms = <1000>;
|
|
inactive-delay-ms = <0>;
|
|
timeout-ms = <5000>;
|
|
};
|
|
|
|
i2cmux {
|
|
compatible = "i2c-mux-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2cmux>;
|
|
mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
|
|
i2c-parent = <&i2c2>;
|
|
idle-state = <1>;
|
|
|
|
i2c5: i2c@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tmp112: temperature-sensor@48 {
|
|
compatible = "ti,tmp112";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&tca6424a>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
tca6424a: gpio-controller@22 {
|
|
compatible = "ti,tca6424";
|
|
reg = <0x22>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <11 IRQ_TYPE_EDGE_RISING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_q7_gpio6>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
gpio-line-names = "GPIO_ROTOR#", "", "TMP_SENSOR_IRQ", "ACM_GPIO1", "ACM_GPIO2", "BATT_T", "", "",
|
|
"ACM_GPIO3", "ACM_GPIO4", "USB1_POWER_EN", "EGPIO_CC_CTL0", "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
|
|
"SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", "MARKER_EN", "EGPIO_TOUCH_RST", "", "";
|
|
};
|
|
};
|
|
|
|
i2c6: i2c@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic: pmic@08 {
|
|
compatible = "fsl,pfuze100";
|
|
reg = <0x08>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbh1 {
|
|
/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
vbus-supply = <&usb_power>;
|
|
disable-over-current;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&pmic {
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw1c_reg: sw1c {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* keep VGEN3, VGEN4 and VGEN5 enabled in order to maintain backward compatibility with hw-rev. A.0 */
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* supply voltage for eMMC */
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
/* MicroSD card slot */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
|
no-1-8-v;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
/* eMMC module */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
non-removable;
|
|
bus-width = <8>;
|
|
no-1-8-v;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
|
scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
|
|
sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
|
|
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
pinctrl-1 = <&pinctrl_i2c2_gpio>;
|
|
scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
|
|
sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
|
|
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
pinctrl-1 = <&pinctrl_i2c3_gpio>;
|
|
scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
|
sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
rtc: m41t62@68 {
|
|
compatible = "st,m41t62";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&ldb {
|
|
status = "okay";
|
|
|
|
lvds0: lvds-channel@0 {
|
|
status = "okay";
|
|
fsl,data-mapping = "spwg";
|
|
fsl,data-width = <24>;
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
lvds0_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <&phy>;
|
|
status = "okay";
|
|
|
|
fsl,magic-packet;
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy: ethernet-phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <6>;
|
|
qca,clk-out-frequency = <125000000>;
|
|
reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <2000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
status = "okay";
|
|
|
|
num-cs = <1>;
|
|
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
|
|
|
|
flash: m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,sst25vf032b", "jedec,spi-nor";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x0000000 0x100000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "user";
|
|
reg = <0x0100000 0x2fc000>;
|
|
};
|
|
|
|
partition@3fc000 {
|
|
label = "reserved";
|
|
reg = <0x03fc000 0x4000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
};
|
|
|
|
&iomuxc {
|
|
imx6qdl-congatec-qmx6 {
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_cd: sd2cdgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1_gpio: i2c1gpiogrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0
|
|
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2_gpio: i2c2gpiogrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
|
|
MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3_gpio: i2c3gpiogrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0
|
|
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
|
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_phy_reset: phyrstgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b0 /* RGMII Phy Reset */
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm4: pwm4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
|
|
>;
|
|
};
|
|
|
|
pinctrl_q7_lcd_power: lcdpwrgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x4001b0b0 /* Q7[111] LVDS_PPEN */
|
|
>;
|
|
};
|
|
|
|
pinctrl_q7_backlight_enable: blengrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* Q7[112] LVDS_BLEN */
|
|
>;
|
|
};
|
|
|
|
pinctrl_q7_gpio1: q7gpio1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x4001b0b0 /* Q7[186] GPIO1 */
|
|
>;
|
|
};
|
|
|
|
pinctrl_q7_gpio3: q7gpio3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x4001b0b0 /* Q7[188] GPIO3 */
|
|
>;
|
|
};
|
|
|
|
pinctrl_q7_gpio5: q7gpio5grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x4001b0b0 /* Q7[190] GPIO5 */
|
|
>;
|
|
};
|
|
|
|
pinctrl_q7_gpio6: q7gpio6grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */
|
|
>;
|
|
};
|
|
|
|
pinctrl_q7_spi_cs1: spics1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x4001b0b0 /* Q7[202] SPI_CS1# */
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2cmux: i2cmuxgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x4001b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */
|
|
>;
|
|
};
|
|
};
|
|
};
|