mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
cc32fd911a
The definition follows the DSA binding in kernel and describes the switch, its ports and PHYs. The switch node has the same structure as in Linux and this patch enables it (and relevant ports) for the LS1028A RDB board. ENETC PF6 is the 2nd Eth controller linked to the switch on LS1028A, it is not used in U-Boot and was disabled. Ethernet port aliases were also added to better manage the multitude of ports available now. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Michael Walle <michael@walle.cc>
483 lines
11 KiB
Text
483 lines
11 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* NXP ls1028a SOC common device tree source
|
|
*
|
|
* Copyright 2019-2020 NXP
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
compatible = "fsl,ls1028a";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
sysclk: sysclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
clock-output-names = "sysclk";
|
|
};
|
|
|
|
clockgen: clocking@1300000 {
|
|
compatible = "fsl,ls1028a-clockgen";
|
|
reg = <0x0 0x1300000 0x0 0xa0000>;
|
|
#clock-cells = <2>;
|
|
clocks = <&sysclk>;
|
|
};
|
|
|
|
memory@01080000 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x01080000 0 0x80000000>;
|
|
/* DRAM space - 1, size : 2 GB DRAM */
|
|
};
|
|
|
|
gic: interrupt-controller@6000000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
|
|
<0x0 0x06040000 0 0x40000>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
gic_lpi_base: syscon@0x80000000 {
|
|
compatible = "gic-lpi-base";
|
|
reg = <0x0 0x80000000 0x0 0x100000>;
|
|
max-gic-redistributors = <2>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
fspi: flexspi@20c0000 {
|
|
compatible = "nxp,lx2160a-fspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x20c0000 0x0 0x10000>,
|
|
<0x0 0x20000000 0x0 0x10000000>;
|
|
reg-names = "fspi_base", "fspi_mmap";
|
|
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
|
|
clock-names = "fspi_en", "fspi";
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial0: serial@21c0500 {
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550a";
|
|
reg = <0x0 0x21c0500 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial1: serial@21c0600 {
|
|
device_type = "serial";
|
|
compatible = "fsl,ns16550", "ns16550a";
|
|
reg = <0x0 0x21c0600 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie1: pcie@3400000 {
|
|
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
|
|
reg = <0x00 0x03400000 0x0 0x80000
|
|
0x00 0x03480000 0x0 0x40000 /* lut registers */
|
|
0x00 0x034c0000 0x0 0x40000 /* pf controls registers */
|
|
0x80 0x00000000 0x0 0x20000>; /* configuration space */
|
|
reg-names = "dbi", "lut", "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-lanes = <4>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
};
|
|
|
|
pcie2: pcie@3500000 {
|
|
compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
|
|
reg = <0x00 0x03500000 0x0 0x80000
|
|
0x00 0x03580000 0x0 0x40000 /* lut registers */
|
|
0x00 0x035c0000 0x0 0x40000 /* pf controls registers */
|
|
0x88 0x00000000 0x0 0x20000>; /* configuration space */
|
|
reg-names = "dbi", "lut", "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-lanes = <4>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
};
|
|
|
|
pcie@1f0000000 {
|
|
compatible = "pci-host-ecam-generic";
|
|
/* ECAM bus 0, HW has more space reserved but not populated */
|
|
bus-range = <0x0 0x0>;
|
|
reg = <0x01 0xf0000000 0x0 0x100000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
|
|
enetc0: pci@0,0 {
|
|
reg = <0x000000 0 0 0 0>;
|
|
status = "disabled";
|
|
};
|
|
enetc1: pci@0,1 {
|
|
reg = <0x000100 0 0 0 0>;
|
|
status = "disabled";
|
|
};
|
|
enetc2: pci@0,2 {
|
|
reg = <0x000200 0 0 0 0>;
|
|
status = "okay";
|
|
phy-mode = "internal";
|
|
};
|
|
mdio0: pci@0,3 {
|
|
#address-cells=<0>;
|
|
#size-cells=<1>;
|
|
reg = <0x000300 0 0 0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix: pci@0,5 {
|
|
reg = <0x000500 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mscc_felix_port0: port@0 {
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port1: port@1 {
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port2: port@2 {
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port3: port@3 {
|
|
reg = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port4: port@4 {
|
|
reg = <4>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
mscc_felix_port5: port@5 {
|
|
reg = <5>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
|
|
};
|
|
};
|
|
};
|
|
|
|
enetc6: pci@0,6 {
|
|
reg = <0x000600 0 0 0 0>;
|
|
status = "disabled";
|
|
phy-mode = "internal";
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@2000000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2000000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2010000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2010000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@2020000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2020000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@2030000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2030000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@2040000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2040000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@2050000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2050000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@2060000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2060000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c7: i2c@2070000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2070000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "i2c";
|
|
clocks = <&clockgen 4 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart0: serial@2260000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2260000 0x0 0x1000>;
|
|
interrupts = <0 232 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart1: serial@2270000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2270000 0x0 0x1000>;
|
|
interrupts = <0 233 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart2: serial@2280000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2280000 0x0 0x1000>;
|
|
interrupts = <0 234 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart3: serial@2290000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2290000 0x0 0x1000>;
|
|
interrupts = <0 235 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart4: serial@22a0000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x22a0000 0x0 0x1000>;
|
|
interrupts = <0 236 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart5: serial@22b0000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x22b0000 0x0 0x1000>;
|
|
interrupts = <0 237 0x4>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb3@3100000 {
|
|
compatible = "fsl,layerscape-dwc3";
|
|
reg = <0x0 0x3100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2: usb3@3110000 {
|
|
compatible = "fsl,layerscape-dwc3";
|
|
reg = <0x0 0x3110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi0: dspi@2100000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 0>;
|
|
num-cs = <5>;
|
|
litte-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi1: dspi@2110000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 0>;
|
|
num-cs = <5>;
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi2: dspi@2120000 {
|
|
compatible = "fsl,vf610-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2120000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 0>;
|
|
num-cs = <5>;
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc0: esdhc@2140000 {
|
|
compatible = "fsl,esdhc";
|
|
reg = <0x0 0x2140000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
big-endian;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc1: esdhc@2150000 {
|
|
compatible = "fsl,esdhc";
|
|
reg = <0x0 0x2150000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
big-endian;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@2300000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2300000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
gpio1: gpio@2310000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2310000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
gpio2: gpio@2320000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2320000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
sata: sata@3200000 {
|
|
compatible = "fsl,ls1028a-ahci";
|
|
reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
|
|
0x7 0x100520 0x0 0x4>; /* ecc sata addr*/
|
|
reg-names = "sata-base", "ecc-addr";
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cluster1_core0_watchdog: wdt@c000000 {
|
|
compatible = "arm,sp805-wdt";
|
|
reg = <0x0 0xc000000 0x0 0x1000>;
|
|
};
|
|
};
|