mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
13cfbe5135
For current U-Boot to initialize status LEDs via status_led_init(), it is required to have both CONFIG_STATUS_LED and STATUS_LED_BOOT defined. This may be a particular concern with GPIO LEDs, where __led_init() is required to correctly set up the GPIO (gpio_request and gpio_direction_output). Without STATUS_LED_BOOT the initialization isn't called, which could leave the user with a non-functional "led" command - due to the fact that the LED routines in gpio_led.c use gpio_set_value() just fine, but the GPIO never got set up properly in the first place. I think having CONFIG_STATUS_LED is sufficient to justify a corresponding call to status_led_init(), even with no STATUS_LED_BOOT defined. To do so, common/board_r.c needs call that routine, so it now is exposed via status_led.h. Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> [trini: Add dummy __led_init to pca9551_led.c] Signed-off-by: Tom Rini <trini@konsulko.com>
171 lines
3.4 KiB
C
171 lines
3.4 KiB
C
/*
|
|
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
|
|
#ifndef CONFIG_PCA9551_I2C_ADDR
|
|
#error "CONFIG_PCA9551_I2C_ADDR not defined!"
|
|
#endif
|
|
|
|
#define PCA9551_REG_INPUT 0x00 /* Input register (read only) */
|
|
#define PCA9551_REG_PSC0 0x01 /* Frequency prescaler 0 */
|
|
#define PCA9551_REG_PWM0 0x02 /* PWM0 */
|
|
#define PCA9551_REG_PSC1 0x03 /* Frequency prescaler 1 */
|
|
#define PCA9551_REG_PWM1 0x04 /* PWM1 */
|
|
#define PCA9551_REG_LS0 0x05 /* LED0 to LED3 selector */
|
|
#define PCA9551_REG_LS1 0x06 /* LED4 to LED7 selector */
|
|
|
|
#define PCA9551_CTRL_AI (1 << 4) /* Auto-increment flag */
|
|
|
|
#define PCA9551_LED_STATE_ON 0x00
|
|
#define PCA9551_LED_STATE_OFF 0x01
|
|
#define PCA9551_LED_STATE_BLINK0 0x02
|
|
#define PCA9551_LED_STATE_BLINK1 0x03
|
|
|
|
struct pca9551_blink_rate {
|
|
u8 psc; /* Frequency preescaler, see PCA9551_7.pdf p. 6 */
|
|
u8 pwm; /* Pulse width modulation, see PCA9551_7.pdf p. 6 */
|
|
};
|
|
|
|
static int freq_last = -1;
|
|
static int mask_last = -1;
|
|
static int idx_last = -1;
|
|
static int mode_last;
|
|
|
|
static int pca9551_led_get_state(int led, int *state)
|
|
{
|
|
unsigned int reg;
|
|
u8 shift, buf;
|
|
int ret;
|
|
|
|
if (led < 0 || led > 7) {
|
|
return -EINVAL;
|
|
} else if (led < 4) {
|
|
reg = PCA9551_REG_LS0;
|
|
shift = led << 1;
|
|
} else {
|
|
reg = PCA9551_REG_LS1;
|
|
shift = (led - 4) << 1;
|
|
}
|
|
|
|
ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*state = (buf >> shift) & 0x03;
|
|
return 0;
|
|
}
|
|
|
|
static int pca9551_led_set_state(int led, int state)
|
|
{
|
|
unsigned int reg;
|
|
u8 shift, buf, mask;
|
|
int ret;
|
|
|
|
if (led < 0 || led > 7) {
|
|
return -EINVAL;
|
|
} else if (led < 4) {
|
|
reg = PCA9551_REG_LS0;
|
|
shift = led << 1;
|
|
} else {
|
|
reg = PCA9551_REG_LS1;
|
|
shift = (led - 4) << 1;
|
|
}
|
|
mask = 0x03 << shift;
|
|
|
|
ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
buf = (buf & ~mask) | ((state & 0x03) << shift);
|
|
|
|
ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca9551_led_set_blink_rate(int idx, struct pca9551_blink_rate rate)
|
|
{
|
|
unsigned int reg;
|
|
int ret;
|
|
|
|
switch (idx) {
|
|
case 0:
|
|
reg = PCA9551_REG_PSC0;
|
|
break;
|
|
case 1:
|
|
reg = PCA9551_REG_PSC1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
reg |= PCA9551_CTRL_AI;
|
|
|
|
ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, (u8 *)&rate, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Functions referenced by cmd_led.c or status_led.c
|
|
*/
|
|
void __led_init(led_id_t id, int state)
|
|
{
|
|
}
|
|
|
|
void __led_set(led_id_t mask, int state)
|
|
{
|
|
if (state == STATUS_LED_OFF)
|
|
pca9551_led_set_state(mask, PCA9551_LED_STATE_OFF);
|
|
else
|
|
pca9551_led_set_state(mask, PCA9551_LED_STATE_ON);
|
|
}
|
|
|
|
void __led_toggle(led_id_t mask)
|
|
{
|
|
int state = 0;
|
|
|
|
pca9551_led_get_state(mask, &state);
|
|
pca9551_led_set_state(mask, !state);
|
|
}
|
|
|
|
void __led_blink(led_id_t mask, int freq)
|
|
{
|
|
struct pca9551_blink_rate rate;
|
|
int mode;
|
|
int idx;
|
|
|
|
if ((freq == freq_last) || (mask == mask_last)) {
|
|
idx = idx_last;
|
|
mode = mode_last;
|
|
} else {
|
|
/* Toggle blink index */
|
|
if (idx_last == 0) {
|
|
idx = 1;
|
|
mode = PCA9551_LED_STATE_BLINK1;
|
|
} else {
|
|
idx = 0;
|
|
mode = PCA9551_LED_STATE_BLINK0;
|
|
}
|
|
|
|
idx_last = idx;
|
|
mode_last = mode;
|
|
}
|
|
freq_last = freq;
|
|
mask_last = mask;
|
|
|
|
rate.psc = ((freq * 38) / 1000) - 1;
|
|
rate.pwm = 128; /* 50% duty cycle */
|
|
|
|
pca9551_led_set_blink_rate(idx, rate);
|
|
pca9551_led_set_state(mask, mode);
|
|
}
|