u-boot/drivers/misc/fsl_debug_server.c
Mingkai Hu 9f3183d2d6 armv8/fsl_lsch3: Change arch to fsl-layerscape
There are two LS series processors are built on ARMv8 Layersacpe
architecture currently, LS2085A and LS1043A. They are based on
ARMv8 core although use different chassis, so create fsl-layerscape
to refactor the common code for the LS series processors which also
paves the way for adding LS1043A platform.

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:00 -07:00

250 lines
6.9 KiB
C

/*
* Copyright (C) 2014 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <asm/io.h>
#include <asm/system.h>
#include <fsl-mc/fsl_mc.h>
#include <fsl_debug_server.h>
DECLARE_GLOBAL_DATA_PTR;
static int debug_server_ver_info_maj, debug_server_ver_info_min;
/**
* Copying Debug Server firmware to DDR
*/
static int debug_server_copy_image(const char *title, u64 image_addr,
u32 image_size, u64 debug_server_ram_addr)
{
debug("%s copied to address %p\n", title,
(void *)debug_server_ram_addr);
memcpy((void *)debug_server_ram_addr, (void *)image_addr, image_size);
return 0;
}
/**
* Debug Server FIT image parser checks if the image is in FIT
* format, verifies integrity of the image and calculates
* raw image address and size values.
*
* Returns 0 if success and -1 if any of the above mentioned
* task fail.
**/
int debug_server_parse_firmware_fit_image(const void **raw_image_addr,
size_t *raw_image_size)
{
int format;
void *fit_hdr;
int node_offset;
const void *data;
size_t size;
const char *uname = "firmware";
char *desc;
char *debug_server_ver_info;
char *debug_server_ver_info_major, *debug_server_ver_info_minor;
/* Check if the image is in NOR flash */
#ifdef CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
fit_hdr = (void *)CONFIG_SYS_DEBUG_SERVER_FW_ADDR;
#else
#error "CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR not defined"
#endif
/* Check if Image is in FIT format */
format = genimg_get_format(fit_hdr);
if (format != IMAGE_FORMAT_FIT) {
printf("Debug Server FW: Not a FIT image\n");
goto out_error;
}
if (!fit_check_format(fit_hdr)) {
printf("Debug Server FW: Bad FIT image format\n");
goto out_error;
}
node_offset = fit_image_get_node(fit_hdr, uname);
if (node_offset < 0) {
printf("Debug Server FW:Can not find %s subimage\n", uname);
goto out_error;
}
/* Verify Debug Server firmware image */
if (!fit_image_verify(fit_hdr, node_offset)) {
printf("Debug Server FW: Bad Debug Server firmware hash");
goto out_error;
}
if (fit_get_desc(fit_hdr, node_offset, &desc) < 0) {
printf("Debug Server FW: Failed to get FW description");
goto out_error;
}
debug_server_ver_info = strstr(desc, "Version");
debug_server_ver_info_major = strtok(debug_server_ver_info, ".");
debug_server_ver_info_minor = strtok(NULL, ".");
debug_server_ver_info_maj =
simple_strtoul(debug_server_ver_info_major, NULL, 10);
debug_server_ver_info_min =
simple_strtoul(debug_server_ver_info_minor, NULL, 10);
/* Debug server version checking */
if ((debug_server_ver_info_maj < DEBUG_SERVER_VER_MAJOR) ||
(debug_server_ver_info_min < DEBUG_SERVER_VER_MINOR)) {
printf("Debug server FW mismatches the min version required\n");
printf("Expected:%d.%d, Got %d.%d\n",
DEBUG_SERVER_VER_MAJOR, DEBUG_SERVER_VER_MINOR,
debug_server_ver_info_maj,
debug_server_ver_info_min);
goto out_error;
}
/* Get address and size of raw image */
fit_image_get_data(fit_hdr, node_offset, &data, &size);
*raw_image_addr = data;
*raw_image_size = size;
return 0;
out_error:
return -1;
}
/**
* Return the actual size of the Debug Server private DRAM block.
*
* NOTE: For now this function always returns the minimum required size,
* However, in the future, the actual size may be obtained from an environment
* variable.
*/
unsigned long debug_server_get_dram_block_size(void)
{
return CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE;
}
int debug_server_init(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
int error, timeout = CONFIG_SYS_DEBUG_SERVER_TIMEOUT;
int debug_server_boot_status;
u64 debug_server_ram_addr, debug_server_ram_size;
const void *raw_image_addr;
size_t raw_image_size = 0;
debug("debug_server_init called\n");
/*
* The Debug Server private DRAM block was already carved at the end of
* DRAM by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
*/
debug_server_ram_size = debug_server_get_dram_block_size();
if (gd->bd->bi_dram[1].start)
debug_server_ram_addr =
gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
else
debug_server_ram_addr =
gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
#ifdef CONFIG_FSL_MC_ENET
debug_server_ram_addr += mc_get_dram_block_size();
#endif
error = debug_server_parse_firmware_fit_image(&raw_image_addr,
&raw_image_size);
if (error != 0)
goto out;
debug("debug server (ram addr = 0x%llx, ram size = 0x%llx)\n",
debug_server_ram_addr, debug_server_ram_size);
/*
* Load the Debug Server FW at the beginning of the Debug Server
* private DRAM block:
*/
debug_server_copy_image("Debug Server Firmware",
(u64)raw_image_addr, raw_image_size,
debug_server_ram_addr);
/* flush dcache */
flush_dcache_range((unsigned long)debug_server_ram_addr,
(unsigned long)debug_server_ram_addr +
(unsigned long)debug_server_ram_size);
/*
* Tell SP that the Debug Server FW is about to be launched. Before that
* populate the following:
* 1. Write the size allocated to SP Memory region into Bits {31:16} of
* SCRATCHRW5.
* 2. Write the start address of the SP memory regions into
* SCRATCHRW5 (Bits {15:0}, contain most significant bits, Bits
* {47:32} of the SP Memory Region physical start address
* (SoC address)) and SCRATCHRW6 (Bits {31:0}).
* 3. To know the Debug Server FW boot status, set bit 0 of SCRATCHRW11
* to 1. The Debug Server sets this to 0 to indicate a
* successul boot.
* 4. Wakeup SP by writing 0x1F to VSG GIC reg VIGR2.
*/
/* 512 MB */
out_le32(&gur->scratchrw[5 - 1],
(u32)((u64)debug_server_ram_addr >> 32) | (0x000D << 16));
out_le32(&gur->scratchrw[6 - 1],
((u32)debug_server_ram_addr) & 0xFFFFFFFF);
out_le32(&gur->scratchrw[11 - 1], DEBUG_SERVER_INIT_STATUS);
/* Allow the changes to reflect in GUR block */
mb();
/*
* Program VGIC to raise an interrupt to SP
*/
out_le32(CONFIG_SYS_FSL_SP_VSG_GIC_VIGR2, 0x1F);
/* Allow the changes to reflect in VIGR2 */
mb();
dmb();
debug("Polling for Debug server to launch ...\n");
while (1) {
debug_server_boot_status = in_le32(&gur->scratchrw[11 - 1]);
if (!(debug_server_boot_status & DEBUG_SERVER_INIT_STATUS_MASK))
break;
udelay(1); /* throttle polling */
if (timeout-- <= 0)
break;
}
if (timeout <= 0) {
printf("Debug Server FW timed out (boot status: 0x%x)\n",
debug_server_boot_status);
error = -ETIMEDOUT;
goto out;
}
if (debug_server_boot_status & DEBUG_SERVER_INIT_STATUS_MASK) {
printf("Debug server FW error'ed out (boot status: 0x%x)\n",
debug_server_boot_status);
error = -ENODEV;
goto out;
}
printf("Debug server booted\n");
printf("Detected firmware %d.%d, (boot status: 0x0%x)\n",
debug_server_ver_info_maj, debug_server_ver_info_min,
debug_server_boot_status);
out:
if (error != 0)
debug_server_boot_status = -error;
else
debug_server_boot_status = 0;
return debug_server_boot_status;
}