u-boot/include/configs/rk3399_common.h
Adam Ford acc415ac60 Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMCSD_FS_BOOT_PARTITION

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28 16:18:10 -04:00

80 lines
2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*/
#ifndef __CONFIG_RK3399_COMMON_H
#define __CONFIG_RK3399_COMMON_H
#include "rockchip-common.h"
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define COUNTER_FREQUENCY 24000000
#define CONFIG_ROCKCHIP_STIMER_BASE 0xff8680a0
#define CONFIG_IRAM_BASE 0xff8c0000
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
#define CONFIG_SPL_STACK 0x00400000
#define CONFIG_SPL_MAX_SIZE 0x40000
#define CONFIG_SPL_BSS_START_ADDR 0x00400000
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
#else
#define CONFIG_SPL_STACK 0xff8effff
#define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000
/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000
#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
#endif
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* MMC/SD IP block */
#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
/* RAW SD card / eMMC locations. */
/* FAT sd card locations. */
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xf8000000
#ifndef CONFIG_SPL_BUILD
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00500000\0" \
"script_offset_f=0xffe000\0" \
"script_size_f=0x2000\0" \
"pxefile_addr_r=0x00600000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02080000\0" \
"ramdisk_addr_r=0x06000000\0" \
"kernel_comp_addr_r=0x08000000\0" \
"kernel_comp_size=0x2000000\0"
#ifndef ROCKCHIP_DEVICE_SETTINGS
#define ROCKCHIP_DEVICE_SETTINGS
#endif
#include <config_distro_bootcmd.h>
#include <environment/distro/sf.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
ROCKCHIP_DEVICE_SETTINGS \
BOOTENV \
BOOTENV_SF \
"altbootcmd=" \
"setenv boot_syslinux_conf extlinux/extlinux-rollback.conf;" \
"run distro_bootcmd\0"
#endif
/* enable usb config for usb ether */
#endif