u-boot/configs/px30-core-ctouch2-of10-px30_defconfig
Jagan Teki 0ade02526b engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24 14:56:58 +08:00

108 lines
2.8 KiB
Text

CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10"
CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_ROCKCHIP_PX30=y
CONFIG_TARGET_PX30_CORE=y
CONFIG_DEBUG_UART_CHANNEL=1
CONFIG_TPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_DEBUG_UART_BASE=0xFF160000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2-of10.dtb"
# CONFIG_CONSOLE_MUX is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
# CONFIG_TPL_BANNER_PRINT is not set
CONFIG_SPL_ATF=y
# CONFIG_TPL_FRAMEWORK is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNZIP is not set
CONFIG_CMD_GPT=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_FASTBOOT_BUF_ADDR=0x800800
CONFIG_FASTBOOT_BUF_SIZE=0x04000000
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_ROCKCHIP_OTP=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_PHY_REALTEK=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_TPL_RAM=y
CONFIG_ROCKCHIP_SDRAM_COMMON=y
CONFIG_DM_RESET=y
CONFIG_DM_RNG=y
CONFIG_RNG_ROCKCHIP=y
# CONFIG_SPECIFY_CONSOLE_INDEX is not set
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_SOUND=y
CONFIG_SYSRESET=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_LCD=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y
CONFIG_LZO=y
CONFIG_ERRNO_STR=y