mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 00:03:24 +00:00
134 lines
4.4 KiB
Text
134 lines
4.4 KiB
Text
Overview
|
|
--------
|
|
The LS2080A Reference Design (RDB) is a high-performance computing,
|
|
evaluation, and development platform that supports the QorIQ LS2080A, LS2088A
|
|
Layerscape Architecture processor.
|
|
|
|
The LS2081A Reference Design (RDB) is a high-performance computing,
|
|
evaluation, and development platform that supports the QorIQ LS2081A
|
|
Layerscape Architecture processor.More details in below sections
|
|
|
|
LS2080A, LS2088A, LS2081A SoC Overview
|
|
--------------------------------------
|
|
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A,
|
|
LS2081A, LS2088A SoC overview.
|
|
|
|
LS2080ARDB board Overview
|
|
-----------------------
|
|
- SERDES Connections, 16 lanes supporting:
|
|
- PCI Express - 3.0
|
|
- SATA 3.0
|
|
- 10GBase-R
|
|
- DDR Controller
|
|
- Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
|
|
chip-selects and two DIMM connectors. Support is up to 2133MT/s.
|
|
- One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
|
|
and two DIMM connectors. Support is up to 1600MT/s.
|
|
-IFC/Local Bus
|
|
- IFC rev. 2.0 implementation supporting Little Endian connection scheme.
|
|
- 128 MB NOR flash 16-bit data bus
|
|
- One 2 GB NAND flash with ECC support
|
|
- CPLD connection
|
|
- USB 3.0
|
|
- Two high speed USB 3.0 ports
|
|
- First USB 3.0 port configured as Host with Type-A connector
|
|
- Second USB 3.0 port configured as OTG with micro-AB connector
|
|
- SDHC adapter
|
|
- SD Card Rev 2.0 and Rev 3.0
|
|
- DSPI
|
|
- 128 MB high-speed flash Memory for boot code and storage (up to 108MHz)
|
|
- 4 I2C controllers
|
|
- Two SATA onboard connectors
|
|
- UART
|
|
- ARM JTAG support
|
|
|
|
LS2081ARDB board Overview
|
|
-------------------------
|
|
LS2081ARDB board is similar to LS2080ARDB board
|
|
with few differences like
|
|
- Hosts LS2081A SoC
|
|
- Default boot source is QSPI-boot
|
|
- Does not have IFC interface
|
|
- RTC and QSPI flash devices are different
|
|
- Provides QIXIS access via I2C
|
|
|
|
Memory map from core's view
|
|
----------------------------
|
|
0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
|
|
0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
|
|
0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
|
|
0x00_2000_0000 .. 0x00_2FFF_FFFF QSPI region #1
|
|
0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
|
|
0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
|
|
0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
|
|
0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
|
|
|
|
Other addresses are either reserved, or not used directly by U-Boot.
|
|
This list should be updated when more addresses are used.
|
|
|
|
IFC region map from core's view
|
|
-------------------------------
|
|
During boot i.e. IFC Region #1:-
|
|
0x30000000 - 0x37ffffff : 128MB : NOR flash
|
|
0x3C000000 - 0x40000000 : 64MB : CPLD
|
|
|
|
After relocate to DDR i.e. IFC Region #2:-
|
|
0x5_1000_0000..0x5_1fff_ffff Memory Hole
|
|
0x5_2000_0000..0x5_3fff_ffff IFC CSx (CPLD, NAND and others 512MB)
|
|
0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
|
|
0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
|
|
0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
|
|
|
|
Booting Options
|
|
---------------
|
|
a) NOR boot
|
|
b) NAND boot
|
|
c) QSPI boot
|
|
|
|
Memory map for NOR boot
|
|
-------------------------
|
|
Image Flash Offset
|
|
RCW+PBI 0x00000000
|
|
Boot firmware (U-Boot) 0x00100000
|
|
Boot firmware Environment 0x00300000
|
|
PPA firmware 0x00400000
|
|
Secure Headers 0x00600000
|
|
Cortina PHY firmware 0x00980000
|
|
DPAA2 MC 0x00A00000
|
|
DPAA2 DPL 0x00D00000
|
|
DPAA2 DPC 0x00E00000
|
|
Kernel.itb 0x01000000
|
|
|
|
cfg_rcw_src switches needs to be changed for booting from different option.
|
|
Refer to board documentation for correct switch setting.
|
|
|
|
QSPI boot details
|
|
===================
|
|
Supported only for
|
|
LS2088ARDB RevF board with LS2088A SoC.
|
|
|
|
Images needs to be copied to QSPI flash
|
|
as per memory map given below.
|
|
|
|
Memory map for QSPI flash
|
|
-------------------------
|
|
Image Flash Offset
|
|
RCW+PBI 0x00000000
|
|
Boot firmware (U-Boot) 0x00100000
|
|
Boot firmware Environment 0x00300000
|
|
PPA firmware 0x00400000
|
|
Cortina PHY firmware 0x00980000
|
|
DPAA2 MC 0x00A00000
|
|
DPAA2 DPL 0x00D00000
|
|
DPAA2 DPC 0x00E00000
|
|
Kernel.itb 0x01000000
|
|
|
|
Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
|
|
-------------------------------------------------------------------
|
|
One needs to use appropriate bootargs to boot Linux flavors which do
|
|
not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
|
|
below:
|
|
|
|
=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
|
|
earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
|
|
hugepages=16 mem=2048M'
|