u-boot/board/ti/omap5_uevm/mux_data.h
Jassi Brar e81f63f0d2 ARM: OMAP4/5: Remove dead code against CONFIG_SYS_ENABLE_PADS_ALL
The commit
f3f98bb0 : "ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls"
removed the config option aimed towards moving that stuff into kernel, which
renders some code unreachable. Remove that code.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-01-24 09:38:39 -05:00

58 lines
2.2 KiB
C

/*
* (C) Copyright 2010
* Texas Instruments Incorporated, <www.ti.com>
*
* Sricharan R <r.sricharan@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _EVM5430_MUX_DATA_H
#define _EVM5430_MUX_DATA_H
#include <asm/arch/mux_omap5.h>
const struct pad_conf_entry core_padconf_array_essential[] = {
{EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */
{EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */
{EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */
{EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */
{EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */
{EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */
{EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */
{EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */
{EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */
{EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */
{SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */
{SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */
{SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0*/
{SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1*/
{SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2*/
{SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3*/
{UART3_RX_IRRX, (PTU | IEN | M0)}, /* UART3_RX_IRRX */
{UART3_TX_IRTX, (M0)}, /* UART3_TX_IRTX */
{USBB1_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB1_HSIC_STROBE */
{USBB1_HSIC_DATA, (PTU | IEN | M0)}, /* USBB1_HSIC_DATA */
{USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */
{USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */
{USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE*/
{USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */
{USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */
{USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */
{USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */
{I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */
{I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */
{HSI2_ACWAKE, (PTU | M6)}, /* HSI2_ACWAKE */
{HSI2_CAFLAG, (PTU | M6)}, /* HSI2_CAFLAG */
};
const struct pad_conf_entry wkup_padconf_array_essential[] = {
{SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
{SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
{SYS_32K, (IEN | M0)}, /* SYS_32K */
{FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */
};
#endif /* _EVM4430_MUX_DATA_H */