mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
7f0f1806e3
This extends the pinctrl-sandbox driver to support pin muxing, and adds a test for that behaviour. The test is done in C and not python (like the existing tests for the pinctrl uclass) because it needs to call pinctrl_select_state. Another option could be to add a command that invokes pinctrl_select_state and then test everything in test/py/tests/test_pinmux.py. The pinctrl-sandbox driver now mimics the way that many pinmux devices work. There are two groups of pins which are muxed together, as well as four pins which are muxed individually. I have tried to test all normal paths. However, very few error cases are explicitly checked for. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
87 lines
2.6 KiB
Makefile
87 lines
2.6 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Copyright (c) 2013 Google, Inc
|
|
|
|
obj-$(CONFIG_UT_DM) += bus.o
|
|
obj-$(CONFIG_UT_DM) += nop.o
|
|
obj-$(CONFIG_UT_DM) += test-driver.o
|
|
obj-$(CONFIG_UT_DM) += test-fdt.o
|
|
obj-$(CONFIG_UT_DM) += test-main.o
|
|
obj-$(CONFIG_UT_DM) += test-uclass.o
|
|
|
|
# Tests for particular subsystems - when enabling driver model for a new
|
|
# subsystem you must add sandbox tests here.
|
|
obj-$(CONFIG_UT_DM) += core.o
|
|
ifneq ($(CONFIG_SANDBOX),)
|
|
obj-$(CONFIG_ACPIGEN) += acpi.o
|
|
obj-$(CONFIG_ACPIGEN) += acpigen.o
|
|
obj-$(CONFIG_ACPIGEN) += acpi_dp.o
|
|
obj-$(CONFIG_SOUND) += audio.o
|
|
obj-$(CONFIG_BLK) += blk.o
|
|
obj-$(CONFIG_BOARD) += board.o
|
|
obj-$(CONFIG_BUTTON) += button.o
|
|
obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
|
|
obj-$(CONFIG_CLK) += clk.o clk_ccf.o
|
|
obj-$(CONFIG_DEVRES) += devres.o
|
|
obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
|
|
obj-$(CONFIG_DM_ETH) += eth.o
|
|
obj-$(CONFIG_FIRMWARE) += firmware.o
|
|
obj-$(CONFIG_DM_GPIO) += gpio.o
|
|
obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock.o
|
|
obj-$(CONFIG_DM_I2C) += i2c.o
|
|
obj-$(CONFIG_SOUND) += i2s.o
|
|
obj-y += irq.o
|
|
obj-$(CONFIG_LED) += led.o
|
|
obj-$(CONFIG_DM_MAILBOX) += mailbox.o
|
|
obj-$(CONFIG_DM_MMC) += mmc.o
|
|
obj-y += fdtdec.o
|
|
obj-y += ofnode.o
|
|
obj-y += ofread.o
|
|
obj-$(CONFIG_OSD) += osd.o
|
|
obj-$(CONFIG_DM_VIDEO) += panel.o
|
|
obj-$(CONFIG_DM_PCI) += pci.o
|
|
obj-$(CONFIG_P2SB) += p2sb.o
|
|
obj-$(CONFIG_PCI_ENDPOINT) += pci_ep.o
|
|
obj-$(CONFIG_PCH) += pch.o
|
|
obj-$(CONFIG_PHY) += phy.o
|
|
obj-$(CONFIG_POWER_DOMAIN) += power-domain.o
|
|
obj-$(CONFIG_ACPI_PMC) += pmc.o
|
|
obj-$(CONFIG_DM_PWM) += pwm.o
|
|
obj-$(CONFIG_RAM) += ram.o
|
|
obj-y += regmap.o
|
|
obj-$(CONFIG_REMOTEPROC) += remoteproc.o
|
|
obj-$(CONFIG_DM_RESET) += reset.o
|
|
obj-$(CONFIG_SYSRESET) += sysreset.o
|
|
obj-$(CONFIG_DM_RTC) += rtc.o
|
|
obj-$(CONFIG_DM_SPI_FLASH) += sf.o
|
|
obj-$(CONFIG_SMEM) += smem.o
|
|
obj-$(CONFIG_DM_SPI) += spi.o
|
|
obj-y += syscon.o
|
|
obj-$(CONFIG_DM_USB) += usb.o
|
|
obj-$(CONFIG_DM_PMIC) += pmic.o
|
|
obj-$(CONFIG_DM_REGULATOR) += regulator.o
|
|
obj-$(CONFIG_TIMER) += timer.o
|
|
obj-$(CONFIG_DM_VIDEO) += video.o
|
|
obj-$(CONFIG_ADC) += adc.o
|
|
obj-$(CONFIG_SPMI) += spmi.o
|
|
obj-$(CONFIG_WDT) += wdt.o
|
|
obj-$(CONFIG_AXI) += axi.o
|
|
obj-$(CONFIG_MISC) += misc.o
|
|
obj-$(CONFIG_DM_SERIAL) += serial.o
|
|
obj-$(CONFIG_CPU) += cpu.o
|
|
obj-$(CONFIG_SOC_DEVICE) += soc.o
|
|
obj-$(CONFIG_SOUND) += sound.o
|
|
obj-$(CONFIG_TEE) += tee.o
|
|
obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
|
|
obj-$(CONFIG_DMA) += dma.o
|
|
obj-$(CONFIG_DM_MDIO) += mdio.o
|
|
obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
|
|
obj-$(CONFIG_DM_RNG) += rng.o
|
|
obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
|
|
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
|
|
obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
|
|
obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o
|
|
ifneq ($(CONFIG_PINMUX),)
|
|
obj-$(CONFIG_PINCONF) += pinmux.o
|
|
endif
|
|
endif
|