u-boot/arch/powerpc/cpu/mpc85xx/t4240_ids.c
York Sun 9e75875849 powerpc/mpc85xx: Add T4240 SoC
Add support for Freescale T4240 SoC. Feature of T4240 are
(incomplete list):

12 dual-threaded e6500 cores built on Power Architecture® technology
  Arranged as clusters of four cores sharing a 2 MB L2 cache.
  Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture
    v2.06-compliant)
  Three levels of instruction: user, supervisor, and hypervisor
1.5 MB CoreNet Platform Cache (CPC)
Hierarchical interconnect fabric
  CoreNet fabric supporting coherent and non-coherent transactions with
    prioritization and bandwidth allocation amongst CoreNet end-points
  1.6 Tbps coherent read bandwidth
  Queue Manager (QMan) fabric supporting packet-level queue management and
    quality of service scheduling
Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
    support
  Memory prefetch engine (PMan)
Data Path Acceleration Architecture (DPAA) incorporating acceleration for
    the following functions:
  Packet parsing, classification, and distribution (Frame Manager 1.1)
  Queue management for scheduling, packet sequencing, and congestion
    management (Queue Manager 1.1)
  Hardware buffer management for buffer allocation and de-allocation
    (BMan 1.1)
  Cryptography acceleration (SEC 5.0) at up to 40 Gbps
  RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps
  Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps
  DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0)
32 SerDes lanes at up to 10.3125 GHz
Ethernet interfaces
  Up to four 10 Gbps Ethernet MACs
  Up to sixteen 1 Gbps Ethernet MACs
  Maximum configuration of 4 x 10 GE + 8 x 1 GE
High-speed peripheral interfaces
  Four PCI Express 2.0/3.0 controllers
  Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with
    Type 11 messaging and Type 9 data streaming support
  Interlaken look-aside interface for serial TCAM connection
Additional peripheral interfaces
  Two serial ATA (SATA 2.0) controllers
  Two high-speed USB 2.0 controllers with integrated PHY
  Enhanced secure digital host controller (SD/MMC/eMMC)
  Enhanced serial peripheral interface (eSPI)
  Four I2C controllers
  Four 2-pin or two 4-pin UARTs
  Integrated Flash controller supporting NAND and NOR flash
Two eight-channel DMA engines
Support for hardware virtualization and partitioning enforcement
QorIQ Platform's Trust Architecture 1.1

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 14:31:23 -05:00

203 lines
5.8 KiB
C

/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#ifdef CONFIG_SYS_DPAA_QBMAN
struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
/* dqrr liodn, frame data liodn, liodn off, sdest */
SET_QP_INFO(1, 27, 1, 0),
SET_QP_INFO(2, 28, 1, 0),
SET_QP_INFO(3, 29, 1, 1),
SET_QP_INFO(4, 30, 1, 1),
SET_QP_INFO(5, 31, 1, 2),
SET_QP_INFO(6, 32, 1, 2),
SET_QP_INFO(7, 33, 1, 3),
SET_QP_INFO(8, 34, 1, 3),
SET_QP_INFO(9, 35, 1, 4),
SET_QP_INFO(10, 36, 1, 4),
SET_QP_INFO(11, 37, 1, 5),
SET_QP_INFO(12, 38, 1, 5),
SET_QP_INFO(13, 39, 1, 6),
SET_QP_INFO(14, 40, 1, 6),
SET_QP_INFO(15, 41, 1, 7),
SET_QP_INFO(16, 42, 1, 7),
SET_QP_INFO(17, 43, 1, 8),
SET_QP_INFO(18, 44, 1, 8),
SET_QP_INFO(19, 45, 1, 9),
SET_QP_INFO(20, 46, 1, 9),
SET_QP_INFO(21, 47, 1, 10),
SET_QP_INFO(22, 48, 1, 10),
SET_QP_INFO(23, 49, 1, 11),
SET_QP_INFO(24, 50, 1, 11),
SET_QP_INFO(65, 89, 1, 0),
SET_QP_INFO(66, 90, 1, 0),
SET_QP_INFO(67, 91, 1, 1),
SET_QP_INFO(68, 92, 1, 1),
SET_QP_INFO(69, 93, 1, 2),
SET_QP_INFO(70, 94, 1, 2),
SET_QP_INFO(71, 95, 1, 3),
SET_QP_INFO(72, 96, 1, 3),
SET_QP_INFO(73, 97, 1, 4),
SET_QP_INFO(74, 98, 1, 4),
SET_QP_INFO(75, 99, 1, 5),
SET_QP_INFO(76, 100, 1, 5),
SET_QP_INFO(77, 101, 1, 6),
SET_QP_INFO(78, 102, 1, 6),
SET_QP_INFO(79, 103, 1, 7),
SET_QP_INFO(80, 104, 1, 7),
SET_QP_INFO(81, 105, 1, 8),
SET_QP_INFO(82, 106, 1, 8),
SET_QP_INFO(83, 107, 1, 9),
SET_QP_INFO(84, 108, 1, 9),
SET_QP_INFO(85, 109, 1, 10),
SET_QP_INFO(86, 110, 1, 10),
SET_QP_INFO(87, 111, 1, 11),
SET_QP_INFO(88, 112, 1, 11),
SET_QP_INFO(25, 51, 1, 0),
SET_QP_INFO(26, 52, 1, 0),
};
#endif
struct srio_liodn_id_table srio_liodn_tbl[] = {
SET_SRIO_LIODN_1(1, 307),
SET_SRIO_LIODN_1(2, 387),
};
int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
struct liodn_id_table liodn_tbl[] = {
#ifdef CONFIG_SYS_DPAA_QBMAN
SET_QMAN_LIODN(62),
SET_BMAN_LIODN(63),
#endif
SET_SDHC_LIODN(1, 552),
SET_PME_LIODN(117),
SET_USB_LIODN(1, "fsl-usb2-mph", 553),
SET_USB_LIODN(2, "fsl-usb2-dr", 554),
SET_SATA_LIODN(1, 555),
SET_SATA_LIODN(2, 556),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
SET_DMA_LIODN(1, 147),
SET_DMA_LIODN(2, 227),
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
#ifdef CONFIG_SYS_PMAN
SET_PMAN_LIODN(1, 513),
SET_PMAN_LIODN(2, 514),
SET_PMAN_LIODN(3, 515),
#endif
/* SET_NEXUS_LIODN(557), -- not yet implemented */
};
int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
#ifdef CONFIG_SYS_DPAA_FMAN
struct liodn_id_table fman1_liodn_tbl[] = {
SET_FMAN_RX_1G_LIODN(1, 0, 88),
SET_FMAN_RX_1G_LIODN(1, 1, 89),
SET_FMAN_RX_1G_LIODN(1, 2, 90),
SET_FMAN_RX_1G_LIODN(1, 3, 91),
SET_FMAN_RX_1G_LIODN(1, 4, 92),
SET_FMAN_RX_1G_LIODN(1, 5, 93),
SET_FMAN_RX_10G_LIODN(1, 0, 94),
SET_FMAN_RX_10G_LIODN(1, 1, 95),
};
int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
#if (CONFIG_SYS_NUM_FMAN == 2)
struct liodn_id_table fman2_liodn_tbl[] = {
SET_FMAN_RX_1G_LIODN(2, 0, 88),
SET_FMAN_RX_1G_LIODN(2, 1, 89),
SET_FMAN_RX_1G_LIODN(2, 2, 90),
SET_FMAN_RX_1G_LIODN(2, 3, 91),
SET_FMAN_RX_1G_LIODN(2, 4, 92),
SET_FMAN_RX_1G_LIODN(2, 5, 93),
SET_FMAN_RX_10G_LIODN(2, 0, 94),
SET_FMAN_RX_10G_LIODN(2, 1, 95),
};
int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
#endif
#endif
struct liodn_id_table sec_liodn_tbl[] = {
SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
SET_SEC_RTIC_LIODN_ENTRY(a, 453),
SET_SEC_RTIC_LIODN_ENTRY(b, 549),
SET_SEC_RTIC_LIODN_ENTRY(c, 550),
SET_SEC_RTIC_LIODN_ENTRY(d, 551),
SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
};
int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
#ifdef CONFIG_SYS_DPAA_RMAN
struct liodn_id_table rman_liodn_tbl[] = {
/* Set RMan block 0-3 liodn offset */
SET_RMAN_LIODN(0, 678),
SET_RMAN_LIODN(1, 679),
SET_RMAN_LIODN(2, 680),
SET_RMAN_LIODN(3, 681),
};
int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
#endif
struct liodn_id_table liodn_bases[] = {
#ifdef CONFIG_SYS_DPAA_DCE
[FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694),
#endif
[FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
#ifdef CONFIG_SYS_DPAA_FMAN
[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
#if (CONFIG_SYS_NUM_FMAN == 2)
[FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069),
#endif
#endif
#ifdef CONFIG_SYS_DPAA_PME
[FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846),
#endif
#ifdef CONFIG_SYS_DPAA_RMAN
[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
#endif
};