mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
25ab97986c
Synchronise device tree with linux-next next-20220708. Please note that this also means that instead of the previous "generic" U-Boot specific carrier board agnostic device trees we are now using the regular ones for the Colibri Evaluation (carrier) board V3 (e.g. imx7d-colibri-eval-v3.dtb rather than the previous imx7-colibri-rawnand.dtb and imx7d-colibri-emmc-eval-v3.dtb rather than the previous imx7-colibri-emmc.dtb). Please further note that the PMIC node name got changed from rn5t567@33 to pmic@33 which required adjustment in resp. board file board/toradex/colibri_imx7/colibri_imx7.c. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
110 lines
1.9 KiB
Text
110 lines
1.9 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright 2016-2022 Toradex
|
|
*/
|
|
|
|
/ {
|
|
/* Fixed crystal dedicated to MCP2515. */
|
|
clk16m: clk16m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <16000000>;
|
|
};
|
|
};
|
|
|
|
/* Colibri AD0 to AD3 */
|
|
&adc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
|
|
* So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
|
|
*/
|
|
&atmel_mxt_ts {
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */
|
|
pinctrl-0 = <&pinctrl_atmel_adapter>;
|
|
reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */
|
|
status = "disabled";
|
|
};
|
|
|
|
/* Colibri SSP */
|
|
&ecspi3 {
|
|
status = "okay";
|
|
|
|
mcp2515: can@0 {
|
|
clocks = <&clk16m>;
|
|
compatible = "microchip,mcp2515";
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can_int>;
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
vdd-supply = <®_3v3>;
|
|
xceiver-supply = <®_5v0>;
|
|
};
|
|
};
|
|
|
|
/* Colibri Fast Ethernet */
|
|
&fec1 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
|
|
&i2c4 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri PWM<A> */
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri PWM<B> */
|
|
&pwm2 {
|
|
/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri PWM<C> */
|
|
&pwm3 {
|
|
/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri PWM<D> */
|
|
&pwm4 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* M41T0M6 real time clock */
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri UART_A */
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri UART_B */
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri UART_C */
|
|
&uart3 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri USBC */
|
|
&usbotg1 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Colibri MMC/SD */
|
|
&usdhc1 {
|
|
status = "okay";
|
|
};
|