u-boot/drivers/mtd/nand/denali_spl.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

228 lines
4.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014 Panasonic Corporation
* Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/unaligned.h>
#include <linux/mtd/rawnand.h>
#include "denali.h"
#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */
#define DENALI_MAP10 (2 << 26) /* high-level control plane */
#define INDEX_CTRL_REG 0x0
#define INDEX_DATA_REG 0x10
#define SPARE_ACCESS 0x41
#define MAIN_ACCESS 0x42
#define PIPELINE_ACCESS 0x2000
#define BANK(x) ((x) << 24)
static void __iomem *denali_flash_mem =
(void __iomem *)CONFIG_SYS_NAND_DATA_BASE;
static void __iomem *denali_flash_reg =
(void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
static const int flash_bank;
static int page_size, oob_size, pages_per_block;
static void index_addr(uint32_t address, uint32_t data)
{
writel(address, denali_flash_mem + INDEX_CTRL_REG);
writel(data, denali_flash_mem + INDEX_DATA_REG);
}
static int wait_for_irq(uint32_t irq_mask)
{
unsigned long timeout = 1000000;
uint32_t intr_status;
do {
intr_status = readl(denali_flash_reg + INTR_STATUS(flash_bank));
if (intr_status & INTR__ECC_UNCOR_ERR) {
debug("Uncorrected ECC detected\n");
return -EBADMSG;
}
if (intr_status & irq_mask)
break;
udelay(1);
timeout--;
} while (timeout);
if (!timeout) {
debug("Timeout with interrupt status %08x\n", intr_status);
return -EIO;
}
return 0;
}
static void read_data_from_flash_mem(uint8_t *buf, int len)
{
int i;
uint32_t *buf32;
/* transfer the data from the flash */
buf32 = (uint32_t *)buf;
/*
* Let's take care of unaligned access although it rarely happens.
* Avoid put_unaligned() for the normal use cases since it leads to
* a bit performance regression.
*/
if ((unsigned long)buf32 % 4) {
for (i = 0; i < len / 4; i++)
put_unaligned(readl(denali_flash_mem + INDEX_DATA_REG),
buf32++);
} else {
for (i = 0; i < len / 4; i++)
*buf32++ = readl(denali_flash_mem + INDEX_DATA_REG);
}
if (len % 4) {
u32 tmp;
tmp = cpu_to_le32(readl(denali_flash_mem + INDEX_DATA_REG));
buf = (uint8_t *)buf32;
for (i = 0; i < len % 4; i++) {
*buf++ = tmp;
tmp >>= 8;
}
}
}
int denali_send_pipeline_cmd(int page, int ecc_en, int access_type)
{
uint32_t addr, cmd;
static uint32_t page_count = 1;
writel(ecc_en, denali_flash_reg + ECC_ENABLE);
/* clear all bits of intr_status. */
writel(0xffff, denali_flash_reg + INTR_STATUS(flash_bank));
addr = BANK(flash_bank) | page;
/* setup the acccess type */
cmd = DENALI_MAP10 | addr;
index_addr(cmd, access_type);
/* setup the pipeline command */
index_addr(cmd, PIPELINE_ACCESS | page_count);
cmd = DENALI_MAP01 | addr;
writel(cmd, denali_flash_mem + INDEX_CTRL_REG);
return wait_for_irq(INTR__LOAD_COMP);
}
static int nand_read_oob(void *buf, int page)
{
int ret;
ret = denali_send_pipeline_cmd(page, 0, SPARE_ACCESS);
if (ret < 0)
return ret;
read_data_from_flash_mem(buf, oob_size);
return 0;
}
static int nand_read_page(void *buf, int page)
{
int ret;
ret = denali_send_pipeline_cmd(page, 1, MAIN_ACCESS);
if (ret < 0)
return ret;
read_data_from_flash_mem(buf, page_size);
return 0;
}
static int nand_block_isbad(void *buf, int block)
{
int ret;
ret = nand_read_oob(buf, block * pages_per_block);
if (ret < 0)
return ret;
return *((uint8_t *)buf + CONFIG_SYS_NAND_BAD_BLOCK_POS) != 0xff;
}
/* nand_init() - initialize data to make nand usable by SPL */
void nand_init(void)
{
/* access to main area */
writel(0, denali_flash_reg + TRANSFER_SPARE_REG);
/*
* These registers are expected to be already set by the hardware
* or earlier boot code. So we read these values out.
*/
page_size = readl(denali_flash_reg + DEVICE_MAIN_AREA_SIZE);
oob_size = readl(denali_flash_reg + DEVICE_SPARE_AREA_SIZE);
pages_per_block = readl(denali_flash_reg + PAGES_PER_BLOCK);
}
int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
{
int block, page, column, readlen;
int ret;
int force_bad_block_check = 1;
page = offs / page_size;
column = offs % page_size;
block = page / pages_per_block;
page = page % pages_per_block;
while (size) {
if (force_bad_block_check || page == 0) {
ret = nand_block_isbad(dst, block);
if (ret < 0)
return ret;
if (ret) {
block++;
continue;
}
}
force_bad_block_check = 0;
ret = nand_read_page(dst, block * pages_per_block + page);
if (ret < 0)
return ret;
readlen = min(page_size - column, (int)size);
if (unlikely(column)) {
/* Partial page read */
memmove(dst, dst + column, readlen);
column = 0;
}
size -= readlen;
dst += readlen;
page++;
if (page == pages_per_block) {
block++;
page = 0;
}
}
return 0;
}
void nand_deselect(void) {}