mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
09f3ca3dd5
We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
414 lines
12 KiB
C
414 lines
12 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Detlev Zundel, DENX Software Engineering, dzu@denx.de.
|
|
*
|
|
* (C) Copyright 2003-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
|
|
#define CONFIG_INKA4X0 1 /* INKA4x0 board */
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFFE00000 boot low
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFE00000 /* Standard: boot low */
|
|
#endif
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds"
|
|
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
|
|
|
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
*/
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
|
|
#define CONFIG_SYS_XLB_PIPELINING 1
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_SNTP
|
|
#define CONFIG_CMD_USB
|
|
|
|
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
|
|
|
|
#if (CONFIG_SYS_TEXT_BASE == 0xFFE00000) /* Boot low */
|
|
# define CONFIG_SYS_LOWBOOT 1
|
|
#endif
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_IPADDR 192.168.100.2
|
|
#define CONFIG_SERVERIP 192.168.100.1
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define HOSTNAME inka4x0
|
|
#define CONFIG_BOOTFILE "/tftpboot/inka4x0/uImage"
|
|
#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addcons=setenv bootargs ${bootargs} " \
|
|
"console=ttyS0,${baudrate}\0" \
|
|
"flash_nfs=run nfsargs addip addcons;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"net_nfs=tftp 200000 ${bootfile};" \
|
|
"run nfsargs addip addcons;bootm\0" \
|
|
"enable_disp=mw.l 100000 04000000 1;" \
|
|
"cp.l 100000 f0000b20 1;" \
|
|
"cp.l 100000 f0000b28 1\0" \
|
|
"ideargs=setenv bootargs root=/dev/hda1 rw\0" \
|
|
"ide_boot=ext2load ide 0:1 200000 uImage;" \
|
|
"run ideargs addip addcons enable_disp;bootm\0" \
|
|
"brightness=255\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run ide_boot"
|
|
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
#define CONFIG_SYS_FLASH_BASE 0xffe00000
|
|
#define CONFIG_SYS_FLASH_SIZE 0x00200000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CONFIG_SYS_MBAR 0xF0000000
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
|
|
/*
|
|
* SDRAM controller configuration
|
|
*/
|
|
#undef CONFIG_SDR_MT48LC16M16A2
|
|
#undef CONFIG_DDR_MT46V16M16
|
|
#undef CONFIG_DDR_MT46V32M16
|
|
#undef CONFIG_DDR_HYB25D512160BF
|
|
#define CONFIG_DDR_K4H511638C
|
|
|
|
/* Use ON-Chip SRAM until RAM will be available */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
|
|
/* preserve space for the post_word at end of on-chip SRAM */
|
|
#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
|
|
|
|
#ifdef CONFIG_POST
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE
|
|
#else
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
# define CONFIG_SYS_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_MPC5xxx_FEC_MII100
|
|
/*
|
|
* Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
|
|
*/
|
|
/* #define CONFIG_MPC5xxx_FEC_MII10 */
|
|
#define CONFIG_PHY_ADDR 0x00
|
|
#define CONFIG_MII
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*
|
|
* use CS1 as gpio_wkup_6 output
|
|
* Bit 0 (mask: 0x80000000): 0
|
|
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
|
|
* 00 -> No Alternatives, I2C1 is used for onboard EEPROM
|
|
* 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
|
|
* EEPROM
|
|
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
|
|
* use PSC2 as UART: Bits 24-27 (mask: 0x00000070): 0100
|
|
* use PSC3 as UART: Bits 20-23 (mask: 0x00000700): 0100
|
|
* use PSC6 as UART: Bits 9-11 (mask: 0x00700000): 0101
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x01501444
|
|
|
|
/*
|
|
* RTC configuration
|
|
*/
|
|
#define CONFIG_RTC_RTC4543 1 /* use external RTC */
|
|
|
|
/*
|
|
* Software (bit-bang) three wire serial configuration
|
|
*
|
|
* Note that we need the ifdefs because otherwise compilation of
|
|
* mkimage.c fails.
|
|
*/
|
|
#define CONFIG_SOFT_TWS 1
|
|
|
|
#ifdef TWS_IMPLEMENTATION
|
|
#include <mpc5xxx.h>
|
|
#include <asm/io.h>
|
|
|
|
#define TWS_CE MPC5XXX_GPIO_WKUP_PSC1_4 /* GPIO_WKUP_0 */
|
|
#define TWS_WR MPC5XXX_GPIO_WKUP_PSC2_4 /* GPIO_WKUP_1 */
|
|
#define TWS_DATA MPC5XXX_GPIO_SINT_PSC3_4 /* GPIO_SINT_0 */
|
|
#define TWS_CLK MPC5XXX_GPIO_SINT_PSC3_5 /* GPIO_SINT_1 */
|
|
|
|
static inline void tws_ce(unsigned bit)
|
|
{
|
|
struct mpc5xxx_wu_gpio *wu_gpio =
|
|
(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
|
|
if (bit)
|
|
setbits_8(&wu_gpio->dvo, TWS_CE);
|
|
else
|
|
clrbits_8(&wu_gpio->dvo, TWS_CE);
|
|
}
|
|
|
|
static inline void tws_wr(unsigned bit)
|
|
{
|
|
struct mpc5xxx_wu_gpio *wu_gpio =
|
|
(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
|
|
if (bit)
|
|
setbits_8(&wu_gpio->dvo, TWS_WR);
|
|
else
|
|
clrbits_8(&wu_gpio->dvo, TWS_WR);
|
|
}
|
|
|
|
static inline void tws_clk(unsigned bit)
|
|
{
|
|
struct mpc5xxx_gpio *gpio =
|
|
(struct mpc5xxx_gpio *)MPC5XXX_GPIO;
|
|
if (bit)
|
|
setbits_8(&gpio->sint_dvo, TWS_CLK);
|
|
else
|
|
clrbits_8(&gpio->sint_dvo, TWS_CLK);
|
|
}
|
|
|
|
static inline void tws_data(unsigned bit)
|
|
{
|
|
struct mpc5xxx_gpio *gpio =
|
|
(struct mpc5xxx_gpio *)MPC5XXX_GPIO;
|
|
if (bit)
|
|
setbits_8(&gpio->sint_dvo, TWS_DATA);
|
|
else
|
|
clrbits_8(&gpio->sint_dvo, TWS_DATA);
|
|
}
|
|
|
|
static inline unsigned tws_data_read(void)
|
|
{
|
|
struct mpc5xxx_gpio *gpio =
|
|
(struct mpc5xxx_gpio *)MPC5XXX_GPIO;
|
|
return !!(in_8(&gpio->sint_ival) & TWS_DATA);
|
|
}
|
|
|
|
static inline void tws_data_config_output(unsigned output)
|
|
{
|
|
struct mpc5xxx_gpio *gpio =
|
|
(struct mpc5xxx_gpio *)MPC5XXX_GPIO;
|
|
if (output)
|
|
setbits_8(&gpio->sint_ddr, TWS_DATA);
|
|
else
|
|
clrbits_8(&gpio->sint_ddr, TWS_DATA);
|
|
}
|
|
#endif /* TWS_IMPLEMENTATION */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/* Enable an alternate, more extensive memory test */
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
/*
|
|
* Enable loopw command.
|
|
*/
|
|
#define CONFIG_LOOPW
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
|
|
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x00087800 /* for pci_clk = 66 MHz */
|
|
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
|
|
|
|
/* 32Mbit SRAM @0x30000000 */
|
|
#define CONFIG_SYS_CS1_START 0x30000000
|
|
#define CONFIG_SYS_CS1_SIZE 0x00400000
|
|
#define CONFIG_SYS_CS1_CFG 0x31800 /* for pci_clk = 33 MHz */
|
|
|
|
/* 2 quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
|
|
#define CONFIG_SYS_CS2_START 0x80000000
|
|
#define CONFIG_SYS_CS2_SIZE 0x0001000
|
|
#define CONFIG_SYS_CS2_CFG 0x21800 /* for pci_clk = 33 MHz */
|
|
|
|
/* GPIO in @0x30400000 */
|
|
#define CONFIG_SYS_CS3_START 0x30400000
|
|
#define CONFIG_SYS_CS3_SIZE 0x00100000
|
|
#define CONFIG_SYS_CS3_CFG 0x31800 /* for pci_clk = 33 MHz */
|
|
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* USB stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_CLOCK 0x00015555
|
|
#define CONFIG_USB_CONFIG 0x00001000
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff Supports IDE harddisk
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060 /* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x005C /* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
|
|
|
|
#define CONFIG_ATAPI 1
|
|
|
|
#define CONFIG_SYS_BRIGHTNESS 0xFF /* LCD Default Brightness (255 = off) */
|
|
|
|
#endif /* __CONFIG_H */
|