mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 02:20:25 +00:00
1b28a5e2b0
DT alignment with Linux 5.7-rc2, including the kernel commits 431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1 ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
384 lines
7.4 KiB
Text
384 lines
7.4 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) 2019 Marek Vasut <marex@denx.de>
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "stm32mp157.dtsi"
|
|
#include "stm32mp15xc.dtsi"
|
|
#include "stm32mp15-pinctrl.dtsi"
|
|
#include "stm32mp15xxaa-pinctrl.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/mfd/st,stpmic1.h>
|
|
|
|
/ {
|
|
aliases {
|
|
eeprom0 = &eeprom0;
|
|
};
|
|
|
|
memory@c0000000 {
|
|
device_type = "memory";
|
|
reg = <0xC0000000 0x40000000>;
|
|
};
|
|
};
|
|
|
|
&cec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cec_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dcmi {
|
|
status = "okay";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&dcmi_pins_a>;
|
|
pinctrl-1 = <&dcmi_sleep_pins_a>;
|
|
};
|
|
|
|
&dts {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
pmic: stpmic@33 {
|
|
compatible = "st,stpmic1";
|
|
reg = <0x33>;
|
|
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
status = "okay";
|
|
|
|
regulators {
|
|
compatible = "st,stpmic1-regulators";
|
|
ldo1-supply = <&v3v3>;
|
|
ldo2-supply = <&v3v3>;
|
|
ldo3-supply = <&vdd_ddr>;
|
|
ldo5-supply = <&v3v3>;
|
|
ldo6-supply = <&v3v3>;
|
|
pwr_sw1-supply = <&bst_out>;
|
|
pwr_sw2-supply = <&bst_out>;
|
|
|
|
vddcore: buck1 {
|
|
regulator-name = "vddcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_ddr: buck2 {
|
|
regulator-name = "vdd_ddr";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd: buck3 {
|
|
regulator-name = "vdd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
st,mask-reset;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
v3v3: buck4 {
|
|
regulator-name = "v3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
regulator-initial-mode = <0>;
|
|
};
|
|
|
|
vdda: ldo1 {
|
|
regulator-name = "vdda";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO1 0>;
|
|
};
|
|
|
|
v2v8: ldo2 {
|
|
regulator-name = "v2v8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
interrupts = <IT_CURLIM_LDO2 0>;
|
|
};
|
|
|
|
vtt_ddr: ldo3 {
|
|
regulator-name = "vtt_ddr";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_usb: ldo4 {
|
|
regulator-name = "vdd_usb";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
interrupts = <IT_CURLIM_LDO4 0>;
|
|
};
|
|
|
|
vdd_sd: ldo5 {
|
|
regulator-name = "vdd_sd";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO5 0>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
v1v8: ldo6 {
|
|
regulator-name = "v1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
interrupts = <IT_CURLIM_LDO6 0>;
|
|
};
|
|
|
|
vref_ddr: vref_ddr {
|
|
regulator-name = "vref_ddr";
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
bst_out: boost {
|
|
regulator-name = "bst_out";
|
|
interrupts = <IT_OCP_BOOST 0>;
|
|
};
|
|
|
|
vbus_otg: pwr_sw1 {
|
|
regulator-name = "vbus_otg";
|
|
interrupts = <IT_OCP_OTG 0>;
|
|
};
|
|
|
|
vbus_sw: pwr_sw2 {
|
|
regulator-name = "vbus_sw";
|
|
interrupts = <IT_OCP_SWOUT 0>;
|
|
regulator-active-discharge;
|
|
};
|
|
};
|
|
|
|
onkey {
|
|
compatible = "st,stpmic1-onkey";
|
|
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
|
|
interrupt-names = "onkey-falling", "onkey-rising";
|
|
power-off-time-sec = <10>;
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog {
|
|
compatible = "st,stpmic1-wdt";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
eeprom0: eeprom@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
pagesize = <16>;
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ipcc {
|
|
status = "okay";
|
|
};
|
|
|
|
&iwdg2 {
|
|
timeout-sec = <32>;
|
|
status = "okay";
|
|
};
|
|
|
|
&m4_rproc {
|
|
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
|
mbox-names = "vq0", "vq1", "shutdown";
|
|
status = "okay";
|
|
};
|
|
|
|
&pwr_regulators {
|
|
vdd-supply = <&vdd>;
|
|
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&qspi {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
|
|
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
|
|
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
flash0: mx66l51235l@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <108000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
flash1: mx66l51235l@1 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <108000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&rng1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1 {
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
|
|
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
|
|
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
|
|
cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
|
disable-wp;
|
|
st,sig-dir;
|
|
st,neg-edge;
|
|
st,use-ckin;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&vdd_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
|
|
non-removable;
|
|
no-sd;
|
|
no-sdio;
|
|
st,sig-dir;
|
|
st,neg-edge;
|
|
bus-width = <8>;
|
|
vmmc-supply = <&v3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_pins_a>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&timers2 {
|
|
/* spare dmas for other usage (un-delete to enable pwm capture) */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "disabled";
|
|
pwm {
|
|
pinctrl-0 = <&pwm2_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
timer@1 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&timers6 {
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
timer@5 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&timers8 {
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "disabled";
|
|
pwm {
|
|
pinctrl-0 = <&pwm8_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
timer@7 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&timers12 {
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "disabled";
|
|
pwm {
|
|
pinctrl-0 = <&pwm12_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
timer@11 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ehci {
|
|
phys = <&usbphyc_port0>;
|
|
phy-names = "usb";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "peripheral";
|
|
phys = <&usbphyc_port1 0>;
|
|
phy-names = "usb2-phy";
|
|
vbus-supply = <&vbus_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|