u-boot/arch/arm/mach-at91/include/mach/at91sam9260.h
Simon Glass bcee8d6764 dm: gpio: Allow control of GPIO uclass in SPL
At present if CONFIG_SPL_GPIO_SUPPORT is enabled then the GPIO uclass
is included in SPL/TPL without any control for boards. Some boards may
want to disable this to reduce code size where GPIOs are not needed in
SPL or TPL.

Add a new Kconfig option to permit this. Default it to 'y' so that
existing boards work correctly.

Change existing uses of CONFIG_DM_GPIO to CONFIG_IS_ENABLED(DM_GPIO) to
preserve the current behaviour. Also update the 74x164 GPIO driver since
it cannot build with SPL.

This allows us to remove the hacks in config_uncmd_spl.h and
Makefile.uncmd_spl (eventually those files should be removed).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 08:52:29 +08:00

169 lines
5.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* [origin: Linux kernel include/asm-arm/arch-at91/at91sam9260.h]
*
* (C) 2006 Andrew Victor
* (C) Copyright 2010
* Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
*
* Definitions for the SoCs:
* AT91SAM9260, AT91SAM9G20, AT91SAM9XE
*
* Note that those SoCs are mostly software and pin compatible,
* therefore this file applies to all of them. Differences between
* those SoCs are concentrated at the end of this file.
*/
#ifndef AT91SAM9260_H
#define AT91SAM9260_H
/*
* Peripheral identifiers/interrupts.
*/
#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
#define ATMEL_ID_SYS 1 /* System Peripherals */
#define ATMEL_ID_PIOA 2 /* Parallel IO Controller A */
#define ATMEL_ID_PIOB 3 /* Parallel IO Controller B */
#define ATMEL_ID_PIOC 4 /* Parallel IO Controller C */
#define ATMEL_ID_ADC 5 /* Analog-to-Digital Converter */
#define ATMEL_ID_USART0 6 /* USART 0 */
#define ATMEL_ID_USART1 7 /* USART 1 */
#define ATMEL_ID_USART2 8 /* USART 2 */
#define ATMEL_ID_MCI 9 /* Multimedia Card Interface */
#define ATMEL_ID_UDP 10 /* USB Device Port */
#define ATMEL_ID_TWI0 11 /* Two-Wire Interface 0 */
#define ATMEL_ID_SPI0 12 /* Serial Peripheral Interface 0 */
#define ATMEL_ID_SPI1 13 /* Serial Peripheral Interface 1 */
#define ATMEL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
/* Reserved: 15 */
/* Reserved: 16 */
#define ATMEL_ID_TC0 17 /* Timer Counter 0 */
#define ATMEL_ID_TC1 18 /* Timer Counter 1 */
#define ATMEL_ID_TC2 19 /* Timer Counter 2 */
#define ATMEL_ID_UHP 20 /* USB Host port */
#define ATMEL_ID_EMAC0 21 /* Ethernet 0 */
#define ATMEL_ID_ISI 22 /* Image Sensor Interface */
#define ATMEL_ID_USART3 23 /* USART 3 */
#define ATMEL_ID_USART4 24 /* USART 4 */
/* USART5 or TWI1: 25 */
#define ATMEL_ID_TC3 26 /* Timer Counter 3 */
#define ATMEL_ID_TC4 27 /* Timer Counter 4 */
#define ATMEL_ID_TC5 28 /* Timer Counter 5 */
#define ATMEL_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
#define ATMEL_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
#define ATMEL_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
/*
* User Peripherals physical base addresses.
*/
#define ATMEL_BASE_TCB0 0xfffa0000
#define ATMEL_BASE_TC0 0xfffa0000
#define ATMEL_BASE_TC1 0xfffa0040
#define ATMEL_BASE_TC2 0xfffa0080
#define ATMEL_BASE_UDP0 0xfffa4000
#define ATMEL_BASE_MCI 0xfffa8000
#define ATMEL_BASE_TWI0 0xfffac000
#define ATMEL_BASE_USART0 0xfffb0000
#define ATMEL_BASE_USART1 0xfffb4000
#define ATMEL_BASE_USART2 0xfffb8000
#define ATMEL_BASE_SSC0 0xfffbc000
#define ATMEL_BASE_ISI0 0xfffc0000
#define ATMEL_BASE_EMAC0 0xfffc4000
#define ATMEL_BASE_SPI0 0xfffc8000
#define ATMEL_BASE_SPI1 0xfffcc000
#define ATMEL_BASE_USART3 0xfffd0000
#define ATMEL_BASE_USART4 0xfffd4000
/* USART5 or TWI1: 0xfffd8000 */
#define ATMEL_BASE_TCB1 0xfffdc000
#define ATMEL_BASE_TC3 0xfffdc000
#define ATMEL_BASE_TC4 0xfffdc040
#define ATMEL_BASE_TC5 0xfffdc080
#define ATMEL_BASE_ADC 0xfffe0000
/* Reserved: 0xfffe4000 - 0xffffe7ff */
/*
* System Peripherals physical base addresses.
*/
#define ATMEL_BASE_SYS 0xffffe800
#define ATMEL_BASE_SDRAMC 0xffffea00
#define ATMEL_BASE_SMC 0xffffec00
#define ATMEL_BASE_MATRIX 0xffffee00
#define ATMEL_BASE_CCFG 0xffffef14
#define ATMEL_BASE_AIC 0xfffff000
#define ATMEL_BASE_DBGU 0xfffff200
#define ATMEL_BASE_PIOA 0xfffff400
#define ATMEL_BASE_PIOB 0xfffff600
#define ATMEL_BASE_PIOC 0xfffff800
/* EEFC: 0xfffffa00 */
#define ATMEL_BASE_PMC 0xfffffc00
#define ATMEL_BASE_RSTC 0xfffffd00
#define ATMEL_BASE_SHDWN 0xfffffd10
#define ATMEL_BASE_RTT 0xfffffd20
#define ATMEL_BASE_PIT 0xfffffd30
#define ATMEL_BASE_WDT 0xfffffd40
/* GPBR(non-XE SoCs): 0xfffffd50 */
/* GPBR(XE SoCs): 0xfffffd60 */
/* Reserved: 0xfffffd70 - 0xffffffff */
/*
* Internal Memory common on all these SoCs
*/
#define ATMEL_BASE_BOOT 0x00000000 /* Boot mapped area */
#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */
/* SRAM or FLASH: 0x00200000 */
/* SRAM: 0x00300000 */
/* Reserved: 0x00400000 */
#define ATMEL_UHP_BASE 0x00500000 /* USB Host controller */
/*
* External memory
*/
#define ATMEL_BASE_CS0 0x10000000 /* typically NOR */
#define ATMEL_BASE_CS1 0x20000000 /* SDRAM */
#define ATMEL_BASE_CS2 0x30000000
#define ATMEL_BASE_CS3 0x40000000 /* typically NAND */
#define ATMEL_BASE_CS4 0x50000000
#define ATMEL_BASE_CS5 0x60000000
#define ATMEL_BASE_CS6 0x70000000
#define ATMEL_BASE_CS7 0x80000000
/* Timer */
#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c
/*
* Other misc defines
*/
#if !CONFIG_IS_ENABLED(DM_GPIO)
#define ATMEL_PIO_PORTS 3 /* these SoCs have 3 PIO */
#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
#endif
#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
/*
* SoC specific defines
*/
#if defined(CONFIG_AT91SAM9XE)
# define ATMEL_CPU_NAME "AT91SAM9XE"
# define ATMEL_ID_TWI1 25 /* TWI 1 */
# define ATMEL_BASE_FLASH 0x00200000 /* Internal FLASH */
# define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM */
# define ATMEL_BASE_TWI1 0xfffd8000
# define ATMEL_BASE_EEFC 0xfffffa00
# define ATMEL_BASE_GPBR 0xfffffd60
#elif defined(CONFIG_AT91SAM9260)
# define ATMEL_CPU_NAME "AT91SAM9260"
# define ATMEL_ID_USART5 25 /* USART 5 */
# define ATMEL_BASE_SRAM0 0x00200000 /* Internal SRAM 0 */
# define ATMEL_BASE_SRAM1 0x00300000 /* Internal SRAM 1 */
# define ATMEL_BASE_USART5 0xfffd8000
# define ATMEL_BASE_GPBR 0xfffffd50
#elif defined(CONFIG_AT91SAM9G20)
# define ATMEL_CPU_NAME "AT91SAM9G20"
# define ATMEL_ID_USART5 25 /* USART 5 */
# define ATMEL_BASE_SRAM0 0x00200000 /* Internal SRAM 0 */
# define ATMEL_BASE_SRAM1 0x00300000 /* Internal SRAM 1 */
# define ATMEL_BASE_USART5 0xfffd8000
# define ATMEL_BASE_GPBR 0xfffffd50
#endif
#endif