mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
8e0f8efe2a
This patchs adds the ethernet & MDIO driver for the MIPS Octeon II / III SoC platform. Please note that these drivers are based on the 2013 U-Boot version from Marvell and make use of the platform supported helper functions for the ethernet functionality, including stuff like SFP handling. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
226 lines
6.1 KiB
C
226 lines
6.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018-2022 Marvell International Ltd.
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <fdt_support.h>
|
|
#include <log.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <mach/cvmx-regs.h>
|
|
#include <mach/cvmx-csr.h>
|
|
#include <mach/octeon-model.h>
|
|
#include <mach/octeon-feature.h>
|
|
#include <mach/cvmx-smix-defs.h>
|
|
#include <mach/cvmx-config.h>
|
|
#include <mach/cvmx-helper.h>
|
|
#include <mach/cvmx-helper-board.h>
|
|
#include <mach/cvmx-mdio.h>
|
|
|
|
#define CVMX_SMI_DRV_CTL 0x0001180000001828ull
|
|
#define DEFAULT_MDIO_SPEED 2500000 /** 2.5 MHz default speed */
|
|
|
|
/**
|
|
* cvmx_smi_drv_ctl
|
|
*
|
|
* Enables the SMI interface.
|
|
*
|
|
*/
|
|
union cvmx_smi_drv_ctl {
|
|
u64 u64;
|
|
struct cvmx_smi_drv_ctl_s {
|
|
u64 reserved_14_63 : 50;
|
|
u64 pctl : 6;
|
|
u64 reserved_6_7 : 2;
|
|
u64 nctl : 6;
|
|
} s;
|
|
};
|
|
|
|
struct octeon_mdiobus {
|
|
struct mii_dev *mii_dev;
|
|
/**
|
|
* The local bus is in the lower 8 bits, followed by the remote bus in
|
|
* the top 8 bits. Bit 16 will be set if the bus is non-local.
|
|
*/
|
|
u32 bus_id;
|
|
|
|
int node; /** Node number */
|
|
int speed; /** Bus speed, normally 2.5 MHz */
|
|
int fdt_node; /** Node in FDT */
|
|
bool local; /** true if local MDIO bus */
|
|
};
|
|
|
|
static int octeon_mdio_read(struct udevice *mdio_dev, int phy_addr,
|
|
int dev_addr, int reg_addr)
|
|
{
|
|
struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
|
|
struct mii_dev *dev = p->mii_dev;
|
|
int value;
|
|
|
|
debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x) - ", __func__,
|
|
dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr);
|
|
if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
|
|
debug("clause 45 mode\n");
|
|
value = cvmx_mdio_45_read(p->bus_id & 0xff, phy_addr, dev_addr,
|
|
reg_addr);
|
|
} else {
|
|
value = cvmx_mdio_read(p->bus_id & 0xff, phy_addr, reg_addr);
|
|
}
|
|
|
|
debug("Return value: 0x%x\n", value);
|
|
return value;
|
|
}
|
|
|
|
static int octeon_mdio_write(struct udevice *mdio_dev, int phy_addr,
|
|
int dev_addr, int reg_addr, u16 value)
|
|
{
|
|
struct octeon_mdiobus *p = dev_get_priv(mdio_dev);
|
|
struct mii_dev *dev = p->mii_dev;
|
|
|
|
debug("%s(0x%p(%s): bus_id=%d phy_addr=%d, 0x%x, 0x%x, 0x%x)\n",
|
|
__func__, dev, dev->name, p->bus_id, phy_addr, dev_addr, reg_addr,
|
|
value);
|
|
|
|
if (IS_ENABLED(CONFIG_PHYLIB_10G) && dev_addr != MDIO_DEVAD_NONE) {
|
|
debug("clause 45 mode\n");
|
|
return cvmx_mdio_45_write(p->bus_id & 0xff, phy_addr, dev_addr,
|
|
reg_addr, value);
|
|
}
|
|
|
|
return cvmx_mdio_write(p->bus_id & 0xff, phy_addr, reg_addr, value);
|
|
}
|
|
|
|
/**
|
|
* Converts a MDIO register address to a bus number
|
|
*
|
|
* @param reg_addr MDIO base register address
|
|
*
|
|
* @return MDIO bus number or -1 if invalid address
|
|
*/
|
|
int octeon_mdio_reg_addr_to_bus(u64 reg_addr)
|
|
{
|
|
int bus_base;
|
|
int bus;
|
|
|
|
/* Adjust the bus number based on the node number */
|
|
bus_base = cvmx_csr_addr_to_node(reg_addr) * 4;
|
|
reg_addr = cvmx_csr_addr_strip_node(reg_addr);
|
|
|
|
switch (reg_addr) {
|
|
case 0x1180000001800:
|
|
case 0x1180000003800: /* 68XX/78XX address */
|
|
bus = 0;
|
|
break;
|
|
case 0x1180000001900:
|
|
case 0x1180000003880:
|
|
bus = 1;
|
|
break;
|
|
case 0x1180000003900:
|
|
bus = 2;
|
|
break;
|
|
case 0x1180000003980:
|
|
bus = 3;
|
|
break;
|
|
default:
|
|
printf("%s: Unknown register address 0x%llx\n", __func__,
|
|
reg_addr);
|
|
return -1;
|
|
}
|
|
bus += bus_base;
|
|
debug("%s: address 0x%llx is bus %d\n", __func__, reg_addr, bus);
|
|
return bus;
|
|
}
|
|
|
|
static int octeon_mdio_probe(struct udevice *dev)
|
|
{
|
|
struct octeon_mdiobus *p = dev_get_priv(dev);
|
|
union cvmx_smi_drv_ctl drv_ctl;
|
|
cvmx_smix_clk_t smi_clk;
|
|
u64 mdio_addr;
|
|
int bus;
|
|
u64 sclock;
|
|
u32 sample_dly;
|
|
u64 denom;
|
|
|
|
mdio_addr = dev_read_addr(dev);
|
|
debug("%s: Translated address: 0x%llx\n", __func__, mdio_addr);
|
|
bus = octeon_mdio_reg_addr_to_bus(mdio_addr);
|
|
p->bus_id = bus;
|
|
debug("%s: bus: %d\n", __func__, bus);
|
|
|
|
drv_ctl.u64 = csr_rd(CVMX_SMI_DRV_CTL);
|
|
drv_ctl.s.pctl = dev_read_u32_default(dev, "cavium,pctl-drive-strength",
|
|
drv_ctl.s.pctl);
|
|
drv_ctl.s.nctl = dev_read_u32_default(dev, "cavium,nctl-drive-strength",
|
|
drv_ctl.s.nctl);
|
|
debug("%s: Set MDIO PCTL drive strength to 0x%x and NCTL drive strength to 0x%x\n",
|
|
__func__, drv_ctl.s.pctl, drv_ctl.s.nctl);
|
|
csr_wr(CVMX_SMI_DRV_CTL, drv_ctl.u64);
|
|
|
|
/* Set the bus speed, default is 2.5MHz */
|
|
p->speed = dev_read_u32_default(dev, "cavium,max-speed",
|
|
DEFAULT_MDIO_SPEED);
|
|
sclock = gd->bus_clk;
|
|
smi_clk.u64 = csr_rd(CVMX_SMIX_CLK(bus & 3));
|
|
smi_clk.s.phase = sclock / (p->speed * 2);
|
|
|
|
/* Allow sample delay to be specified */
|
|
sample_dly = dev_read_u32_default(dev, "cavium,sample-delay", 0);
|
|
/* Only change the sample delay if it is set, otherwise use
|
|
* the default value of 2.
|
|
*/
|
|
if (sample_dly) {
|
|
u32 sample;
|
|
|
|
denom = (sclock * 1000ULL) / sample_dly;
|
|
debug("%s: sclock: %llu, sample_dly: %u ps, denom: %llu\n",
|
|
__func__, sclock, sample_dly, denom);
|
|
sample = (sclock + denom - 1) / denom;
|
|
debug("%s: sample: %u\n", __func__, smi_clk.s.sample);
|
|
if (sample < 2) {
|
|
printf("%s: warning: cavium,sample-delay %u ps is too small in device tree for %s\n",
|
|
__func__, sample_dly, dev->name);
|
|
sample = 2;
|
|
}
|
|
if (sample > (2 * smi_clk.s.phase - 3)) {
|
|
printf("%s: warning: cavium,sample-delay %u ps is too large in device tree for %s\n",
|
|
__func__, sample_dly, dev->name);
|
|
sample = 2 * smi_clk.s.phase - 3;
|
|
}
|
|
smi_clk.s.sample = sample & 0xf;
|
|
smi_clk.s.sample_hi = (sample >> 4) & 0xf;
|
|
debug("%s(%s): sample delay: %u ps (%d clocks)\n", __func__,
|
|
dev->name, sample_dly, smi_clk.s.sample);
|
|
}
|
|
csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);
|
|
|
|
debug("mdio clock phase: %d clocks\n", smi_clk.s.phase);
|
|
csr_wr(CVMX_SMIX_CLK(bus & 3), smi_clk.u64);
|
|
debug("Enabling SMI interface %s\n", dev->name);
|
|
csr_wr(CVMX_SMIX_EN(bus & 3), 1);
|
|
|
|
/* Muxed MDIO bus support removed for now! */
|
|
return 0;
|
|
}
|
|
|
|
static const struct mdio_ops octeon_mdio_ops = {
|
|
.read = octeon_mdio_read,
|
|
.write = octeon_mdio_write,
|
|
};
|
|
|
|
static const struct udevice_id octeon_mdio_ids[] = {
|
|
{ .compatible = "cavium,octeon-3860-mdio" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(octeon_mdio) = {
|
|
.name = "octeon_mdio",
|
|
.id = UCLASS_MDIO,
|
|
.of_match = octeon_mdio_ids,
|
|
.probe = octeon_mdio_probe,
|
|
.ops = &octeon_mdio_ops,
|
|
.priv_auto = sizeof(struct octeon_mdiobus),
|
|
};
|