mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
8909066199
This function is also available as ofnode_is_enabled(), so use that instead. Signed-off-by: Simon Glass <sjg@chromium.org>
436 lines
13 KiB
C
436 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Felix (VSC9959) Ethernet switch driver
|
|
* Copyright 2018-2021 NXP
|
|
*/
|
|
|
|
/*
|
|
* This driver is used for the Ethernet switch integrated into NXP LS1028A.
|
|
* Felix switch is derived from Microsemi Ocelot but there are several NXP
|
|
* adaptations that makes the two U-Boot drivers largely incompatible.
|
|
*
|
|
* Felix on LS1028A has 4 front panel ports and two internal ports, connected
|
|
* to ENETC interfaces. We're using one of the ENETC interfaces to push traffic
|
|
* into the switch. Injection/extraction headers are used to identify
|
|
* egress/ingress ports in the switch for Tx/Rx.
|
|
*/
|
|
|
|
#include <dm/device_compat.h>
|
|
#include <dm/of_extra.h>
|
|
#include <linux/delay.h>
|
|
#include <net/dsa.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <pci.h>
|
|
|
|
/* defines especially around PCS are reused from enetc */
|
|
#include "../fsl_enetc.h"
|
|
|
|
#define PCI_DEVICE_ID_FELIX_ETHSW 0xEEF0
|
|
|
|
/* Felix has in fact 6 ports, but we don't use the last internal one */
|
|
#define FELIX_PORT_COUNT 5
|
|
/* Front panel port mask */
|
|
#define FELIX_FP_PORT_MASK 0xf
|
|
|
|
/* Register map for BAR4 */
|
|
#define FELIX_SYS 0x010000
|
|
#define FELIX_ES0 0x040000
|
|
#define FELIX_IS1 0x050000
|
|
#define FELIX_IS2 0x060000
|
|
#define FELIX_GMII(port) (0x100000 + (port) * 0x10000)
|
|
#define FELIX_QSYS 0x200000
|
|
#define FELIX_DEVCPU_GCB 0x070000
|
|
#define FELIX_DEVCPU_GCB_SOFT_RST (FELIX_DEVCPU_GCB + 0x00000004)
|
|
#define SOFT_SWC_RST BIT(0)
|
|
#define FELIX_SYS_SYSTEM (FELIX_SYS + 0x00000E00)
|
|
#define FELIX_SYS_SYSTEM_EN BIT(0)
|
|
#define FELIX_SYS_RAM_CTRL (FELIX_SYS + 0x00000F24)
|
|
#define FELIX_SYS_RAM_CTRL_INIT BIT(1)
|
|
#define FELIX_SYS_SYSTEM_PORT_MODE(a) (FELIX_SYS_SYSTEM + 0xC + (a) * 4)
|
|
#define FELIX_SYS_SYSTEM_PORT_MODE_CPU 0x0000001e
|
|
|
|
#define FELIX_ES0_TCAM_CTRL (FELIX_ES0 + 0x000003C0)
|
|
#define FELIX_ES0_TCAM_CTRL_EN BIT(0)
|
|
#define FELIX_IS1_TCAM_CTRL (FELIX_IS1 + 0x000003C0)
|
|
#define FELIX_IS1_TCAM_CTRL_EN BIT(0)
|
|
#define FELIX_IS2_TCAM_CTRL (FELIX_IS2 + 0x000003C0)
|
|
#define FELIX_IS2_TCAM_CTRL_EN BIT(0)
|
|
|
|
#define FELIX_GMII_CLOCK_CFG(port) (FELIX_GMII(port) + 0x00000000)
|
|
#define FELIX_GMII_CLOCK_CFG_LINK_1G 1
|
|
#define FELIX_GMII_CLOCK_CFG_LINK_100M 2
|
|
#define FELIX_GMII_CLOCK_CFG_LINK_10M 3
|
|
#define FELIX_GMII_MAC_ENA_CFG(port) (FELIX_GMII(port) + 0x0000001C)
|
|
#define FELIX_GMII_MAX_ENA_CFG_TX BIT(0)
|
|
#define FELIX_GMII_MAX_ENA_CFG_RX BIT(4)
|
|
#define FELIX_GMII_MAC_IFG_CFG(port) (FELIX_GMII(port) + 0x0000001C + 0x14)
|
|
#define FELIX_GMII_MAC_IFG_CFG_DEF 0x515
|
|
|
|
#define FELIX_QSYS_SYSTEM (FELIX_QSYS + 0x0000F460)
|
|
#define FELIX_QSYS_SYSTEM_SW_PORT_MODE(a) \
|
|
(FELIX_QSYS_SYSTEM + 0x20 + (a) * 4)
|
|
#define FELIX_QSYS_SYSTEM_SW_PORT_ENA BIT(14)
|
|
#define FELIX_QSYS_SYSTEM_SW_PORT_LOSSY BIT(9)
|
|
#define FELIX_QSYS_SYSTEM_SW_PORT_SCH(a) (((a) & 0x3800) << 11)
|
|
#define FELIX_QSYS_SYSTEM_EXT_CPU_CFG (FELIX_QSYS_SYSTEM + 0x80)
|
|
#define FELIX_QSYS_SYSTEM_EXT_CPU_PORT(a) (((a) & 0xf) << 8 | 0xff)
|
|
|
|
/* internal MDIO in BAR0 */
|
|
#define FELIX_PM_IMDIO_BASE 0x8030
|
|
|
|
/* Serdes block on LS1028A */
|
|
#define FELIX_SERDES_BASE 0x1ea0000L
|
|
#define FELIX_SERDES_LNATECR0(lane) (FELIX_SERDES_BASE + 0x818 + \
|
|
(lane) * 0x40)
|
|
#define FELIX_SERDES_LNATECR0_ADPT_EQ 0x00003000
|
|
#define FELIX_SERDES_SGMIICR1(lane) (FELIX_SERDES_BASE + 0x1804 + \
|
|
(lane) * 0x10)
|
|
#define FELIX_SERDES_SGMIICR1_SGPCS BIT(11)
|
|
#define FELIX_SERDES_SGMIICR1_MDEV(a) (((a) & 0x1f) << 27)
|
|
|
|
#define FELIX_PCS_CTRL 0
|
|
#define FELIX_PCS_CTRL_RST BIT(15)
|
|
|
|
/*
|
|
* The long prefix format used here contains two dummy MAC addresses, a magic
|
|
* value in place of a VLAN tag followed by the extraction/injection header and
|
|
* the original L2 frame. Out of all this we only use the port ID.
|
|
*/
|
|
#define FELIX_DSA_TAG_LEN sizeof(struct felix_dsa_tag)
|
|
#define FELIX_DSA_TAG_MAGIC 0x0a008088
|
|
#define FELIX_DSA_TAG_INJ_PORT 7
|
|
#define FELIX_DSA_TAG_INJ_PORT_SET(a) (0x1 << ((a) & FELIX_FP_PORT_MASK))
|
|
#define FELIX_DSA_TAG_EXT_PORT 10
|
|
#define FELIX_DSA_TAG_EXT_PORT_GET(a) ((a) >> 3)
|
|
|
|
struct felix_dsa_tag {
|
|
uchar d_mac[6];
|
|
uchar s_mac[6];
|
|
u32 magic;
|
|
uchar meta[16];
|
|
};
|
|
|
|
struct felix_priv {
|
|
void *regs_base;
|
|
void *imdio_base;
|
|
struct mii_dev imdio;
|
|
};
|
|
|
|
/* MDIO wrappers, we're using these to drive internal MDIO to get to serdes */
|
|
static int felix_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
|
|
{
|
|
struct enetc_mdio_priv priv;
|
|
|
|
priv.regs_base = bus->priv;
|
|
return enetc_mdio_read_priv(&priv, addr, devad, reg);
|
|
}
|
|
|
|
static int felix_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
|
|
u16 val)
|
|
{
|
|
struct enetc_mdio_priv priv;
|
|
|
|
priv.regs_base = bus->priv;
|
|
return enetc_mdio_write_priv(&priv, addr, devad, reg, val);
|
|
}
|
|
|
|
/* set up serdes for SGMII */
|
|
static void felix_init_sgmii(struct mii_dev *imdio, int pidx, bool an)
|
|
{
|
|
u16 reg;
|
|
|
|
/* set up PCS lane address */
|
|
out_le32(FELIX_SERDES_SGMIICR1(pidx), FELIX_SERDES_SGMIICR1_SGPCS |
|
|
FELIX_SERDES_SGMIICR1_MDEV(pidx));
|
|
|
|
/*
|
|
* Set to SGMII mode, for 1Gbps enable AN, for 2.5Gbps set fixed speed.
|
|
* Although fixed speed is 1Gbps, we could be running at 2.5Gbps based
|
|
* on PLL configuration. Setting 1G for 2.5G here is counter intuitive
|
|
* but intentional.
|
|
*/
|
|
reg = ENETC_PCS_IF_MODE_SGMII;
|
|
reg |= an ? ENETC_PCS_IF_MODE_SGMII_AN : ENETC_PCS_IF_MODE_SPEED_1G;
|
|
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
|
|
ENETC_PCS_IF_MODE, reg);
|
|
|
|
/* Dev ability - SGMII */
|
|
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
|
|
ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SGMII);
|
|
|
|
/* Adjust link timer for SGMII */
|
|
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
|
|
ENETC_PCS_LINK_TIMER1, ENETC_PCS_LINK_TIMER1_VAL);
|
|
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
|
|
ENETC_PCS_LINK_TIMER2, ENETC_PCS_LINK_TIMER2_VAL);
|
|
|
|
reg = ENETC_PCS_CR_DEF_VAL;
|
|
reg |= an ? ENETC_PCS_CR_RESET_AN : ENETC_PCS_CR_RST;
|
|
/* restart PCS AN */
|
|
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
|
|
ENETC_PCS_CR, reg);
|
|
}
|
|
|
|
/* set up MAC and serdes for (Q)SXGMII */
|
|
static int felix_init_sxgmii(struct mii_dev *imdio, int pidx)
|
|
{
|
|
int timeout = 1000;
|
|
|
|
/* set up transit equalization control on serdes lane */
|
|
out_le32(FELIX_SERDES_LNATECR0(1), FELIX_SERDES_LNATECR0_ADPT_EQ);
|
|
|
|
/*reset lane */
|
|
felix_mdio_write(imdio, pidx, MDIO_MMD_PCS, FELIX_PCS_CTRL,
|
|
FELIX_PCS_CTRL_RST);
|
|
while (felix_mdio_read(imdio, pidx, MDIO_MMD_PCS,
|
|
FELIX_PCS_CTRL) & FELIX_PCS_CTRL_RST &&
|
|
--timeout) {
|
|
mdelay(10);
|
|
}
|
|
if (felix_mdio_read(imdio, pidx, MDIO_MMD_PCS,
|
|
FELIX_PCS_CTRL) & FELIX_PCS_CTRL_RST)
|
|
return -ETIME;
|
|
|
|
/* Dev ability - SXGMII */
|
|
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL,
|
|
ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SXGMII);
|
|
|
|
/* Restart PCS AN */
|
|
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL, ENETC_PCS_CR,
|
|
ENETC_PCS_CR_RST | ENETC_PCS_CR_RESET_AN);
|
|
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL,
|
|
ENETC_PCS_REPL_LINK_TIMER_1,
|
|
ENETC_PCS_REPL_LINK_TIMER_1_DEF);
|
|
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL,
|
|
ENETC_PCS_REPL_LINK_TIMER_2,
|
|
ENETC_PCS_REPL_LINK_TIMER_2_DEF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Apply protocol specific configuration to MAC, serdes as needed */
|
|
static void felix_start_pcs(struct udevice *dev, int port,
|
|
struct phy_device *phy, struct mii_dev *imdio)
|
|
{
|
|
ofnode node = dsa_port_get_ofnode(dev, port);
|
|
bool inband_an = ofnode_eth_uses_inband_aneg(node);
|
|
|
|
switch (phy->interface) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
case PHY_INTERFACE_MODE_2500BASEX:
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
felix_init_sgmii(imdio, port, inband_an);
|
|
break;
|
|
case PHY_INTERFACE_MODE_10GBASER:
|
|
case PHY_INTERFACE_MODE_USXGMII:
|
|
if (felix_init_sxgmii(imdio, port))
|
|
dev_err(dev, "PCS reset timeout on port %d\n", port);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void felix_init(struct udevice *dev)
|
|
{
|
|
struct dsa_pdata *pdata = dev_get_uclass_plat(dev);
|
|
struct felix_priv *priv = dev_get_priv(dev);
|
|
void *base = priv->regs_base;
|
|
int timeout = 100;
|
|
|
|
/* Switch core reset */
|
|
out_le32(base + FELIX_DEVCPU_GCB_SOFT_RST, SOFT_SWC_RST);
|
|
while (in_le32(base + FELIX_DEVCPU_GCB_SOFT_RST) & SOFT_SWC_RST &&
|
|
--timeout)
|
|
udelay(10);
|
|
if (in_le32(base + FELIX_DEVCPU_GCB_SOFT_RST) & SOFT_SWC_RST)
|
|
dev_err(dev, "Timeout waiting for switch core reset\n");
|
|
timeout = 100;
|
|
|
|
/* Init core memories */
|
|
out_le32(base + FELIX_SYS_RAM_CTRL, FELIX_SYS_RAM_CTRL_INIT);
|
|
while (in_le32(base + FELIX_SYS_RAM_CTRL) & FELIX_SYS_RAM_CTRL_INIT &&
|
|
--timeout)
|
|
udelay(10);
|
|
if (in_le32(base + FELIX_SYS_RAM_CTRL) & FELIX_SYS_RAM_CTRL_INIT)
|
|
dev_err(dev, "Timeout waiting for switch memories\n");
|
|
|
|
/* Start switch core, set up ES0, IS1, IS2 */
|
|
out_le32(base + FELIX_SYS_SYSTEM, FELIX_SYS_SYSTEM_EN);
|
|
out_le32(base + FELIX_ES0_TCAM_CTRL, FELIX_ES0_TCAM_CTRL_EN);
|
|
out_le32(base + FELIX_IS1_TCAM_CTRL, FELIX_IS1_TCAM_CTRL_EN);
|
|
out_le32(base + FELIX_IS2_TCAM_CTRL, FELIX_IS2_TCAM_CTRL_EN);
|
|
udelay(20);
|
|
|
|
priv->imdio.read = felix_mdio_read;
|
|
priv->imdio.write = felix_mdio_write;
|
|
priv->imdio.priv = priv->imdio_base + FELIX_PM_IMDIO_BASE;
|
|
strlcpy(priv->imdio.name, dev->name, MDIO_NAME_LEN);
|
|
|
|
/* set up CPU port */
|
|
out_le32(base + FELIX_QSYS_SYSTEM_EXT_CPU_CFG,
|
|
FELIX_QSYS_SYSTEM_EXT_CPU_PORT(pdata->cpu_port));
|
|
out_le32(base + FELIX_SYS_SYSTEM_PORT_MODE(pdata->cpu_port),
|
|
FELIX_SYS_SYSTEM_PORT_MODE_CPU);
|
|
}
|
|
|
|
/*
|
|
* Probe Felix:
|
|
* - enable the PCI function
|
|
* - map BAR 4
|
|
* - init switch core and port registers
|
|
*/
|
|
static int felix_probe(struct udevice *dev)
|
|
{
|
|
struct felix_priv *priv = dev_get_priv(dev);
|
|
int err;
|
|
|
|
if (ofnode_valid(dev_ofnode(dev)) &&
|
|
!ofnode_is_enabled(dev_ofnode(dev))) {
|
|
dev_dbg(dev, "switch disabled\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv->imdio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0, 0, PCI_REGION_TYPE, 0);
|
|
if (!priv->imdio_base) {
|
|
dev_err(dev, "failed to map BAR0\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->regs_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_4, 0, 0, PCI_REGION_TYPE, 0);
|
|
if (!priv->regs_base) {
|
|
dev_err(dev, "failed to map BAR4\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* register internal MDIO for debug */
|
|
if (!miiphy_get_dev_by_name(dev->name)) {
|
|
struct mii_dev *mii_bus;
|
|
|
|
mii_bus = mdio_alloc();
|
|
if (!mii_bus)
|
|
return -ENOMEM;
|
|
|
|
mii_bus->read = felix_mdio_read;
|
|
mii_bus->write = felix_mdio_write;
|
|
mii_bus->priv = priv->imdio_base + FELIX_PM_IMDIO_BASE;
|
|
strlcpy(mii_bus->name, dev->name, MDIO_NAME_LEN);
|
|
err = mdio_register(mii_bus);
|
|
if (err) {
|
|
mdio_free(mii_bus);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY);
|
|
|
|
dsa_set_tagging(dev, FELIX_DSA_TAG_LEN, 0);
|
|
|
|
/* set up registers */
|
|
felix_init(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int felix_port_probe(struct udevice *dev, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
int supported = PHY_GBIT_FEATURES | SUPPORTED_2500baseX_Full;
|
|
struct felix_priv *priv = dev_get_priv(dev);
|
|
|
|
phy->supported &= supported;
|
|
phy->advertising &= supported;
|
|
|
|
felix_start_pcs(dev, port, phy, &priv->imdio);
|
|
|
|
return phy_config(phy);
|
|
}
|
|
|
|
static int felix_port_enable(struct udevice *dev, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct felix_priv *priv = dev_get_priv(dev);
|
|
void *base = priv->regs_base;
|
|
|
|
/* Set up MAC registers */
|
|
out_le32(base + FELIX_GMII_CLOCK_CFG(port),
|
|
FELIX_GMII_CLOCK_CFG_LINK_1G);
|
|
|
|
out_le32(base + FELIX_GMII_MAC_IFG_CFG(port),
|
|
FELIX_GMII_MAC_IFG_CFG_DEF);
|
|
|
|
out_le32(base + FELIX_GMII_MAC_ENA_CFG(port),
|
|
FELIX_GMII_MAX_ENA_CFG_TX | FELIX_GMII_MAX_ENA_CFG_RX);
|
|
|
|
out_le32(base + FELIX_QSYS_SYSTEM_SW_PORT_MODE(port),
|
|
FELIX_QSYS_SYSTEM_SW_PORT_ENA |
|
|
FELIX_QSYS_SYSTEM_SW_PORT_LOSSY |
|
|
FELIX_QSYS_SYSTEM_SW_PORT_SCH(1));
|
|
|
|
return phy_startup(phy);
|
|
}
|
|
|
|
static void felix_port_disable(struct udevice *dev, int pidx,
|
|
struct phy_device *phy)
|
|
{
|
|
struct felix_priv *priv = dev_get_priv(dev);
|
|
void *base = priv->regs_base;
|
|
|
|
out_le32(base + FELIX_GMII_MAC_ENA_CFG(pidx), 0);
|
|
|
|
out_le32(base + FELIX_QSYS_SYSTEM_SW_PORT_MODE(pidx),
|
|
FELIX_QSYS_SYSTEM_SW_PORT_LOSSY |
|
|
FELIX_QSYS_SYSTEM_SW_PORT_SCH(1));
|
|
|
|
/*
|
|
* we don't call phy_shutdown here to avoid waiting next time we use
|
|
* the port, but the downside is that remote side will think we're
|
|
* actively processing traffic although we are not.
|
|
*/
|
|
}
|
|
|
|
static int felix_xmit(struct udevice *dev, int pidx, void *packet, int length)
|
|
{
|
|
struct felix_dsa_tag *tag = packet;
|
|
|
|
tag->magic = FELIX_DSA_TAG_MAGIC;
|
|
tag->meta[FELIX_DSA_TAG_INJ_PORT] = FELIX_DSA_TAG_INJ_PORT_SET(pidx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int felix_rcv(struct udevice *dev, int *pidx, void *packet, int length)
|
|
{
|
|
struct felix_dsa_tag *tag = packet;
|
|
|
|
if (tag->magic != FELIX_DSA_TAG_MAGIC)
|
|
return -EINVAL;
|
|
|
|
*pidx = FELIX_DSA_TAG_EXT_PORT_GET(tag->meta[FELIX_DSA_TAG_EXT_PORT]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dsa_ops felix_dsa_ops = {
|
|
.port_probe = felix_port_probe,
|
|
.port_enable = felix_port_enable,
|
|
.port_disable = felix_port_disable,
|
|
.xmit = felix_xmit,
|
|
.rcv = felix_rcv,
|
|
};
|
|
|
|
U_BOOT_DRIVER(felix_ethsw) = {
|
|
.name = "felix-switch",
|
|
.id = UCLASS_DSA,
|
|
.probe = felix_probe,
|
|
.ops = &felix_dsa_ops,
|
|
.priv_auto = sizeof(struct felix_priv),
|
|
};
|
|
|
|
static struct pci_device_id felix_ethsw_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_FELIX_ETHSW) },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_PCI_DEVICE(felix_ethsw, felix_ethsw_ids);
|