mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
bed7b2f00b
Get the config region to use from the reg prop. Also update the referenced region index used in comment. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
373 lines
11 KiB
C
373 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2021 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
*
|
|
* Copyright (c) 2021 Rockchip, Inc.
|
|
*
|
|
* Copyright (C) 2018 Texas Instruments, Inc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <pci.h>
|
|
#include <dm/device_compat.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
#include "pcie_dw_common.h"
|
|
|
|
int pcie_dw_get_link_speed(struct pcie_dw *pci)
|
|
{
|
|
return (readl(pci->dbi_base + PCIE_LINK_STATUS_REG) &
|
|
PCIE_LINK_STATUS_SPEED_MASK) >> PCIE_LINK_STATUS_SPEED_OFF;
|
|
}
|
|
|
|
int pcie_dw_get_link_width(struct pcie_dw *pci)
|
|
{
|
|
return (readl(pci->dbi_base + PCIE_LINK_STATUS_REG) &
|
|
PCIE_LINK_STATUS_WIDTH_MASK) >> PCIE_LINK_STATUS_WIDTH_OFF;
|
|
}
|
|
|
|
static void dw_pcie_writel_ob_unroll(struct pcie_dw *pci, u32 index, u32 reg,
|
|
u32 val)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
void __iomem *base = pci->atu_base;
|
|
|
|
writel(val, base + offset + reg);
|
|
}
|
|
|
|
static u32 dw_pcie_readl_ob_unroll(struct pcie_dw *pci, u32 index, u32 reg)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
void __iomem *base = pci->atu_base;
|
|
|
|
return readl(base + offset + reg);
|
|
}
|
|
|
|
/**
|
|
* pcie_dw_prog_outbound_atu_unroll() - Configure ATU for outbound accesses
|
|
*
|
|
* @pcie: Pointer to the PCI controller state
|
|
* @index: ATU region index
|
|
* @type: ATU accsess type
|
|
* @cpu_addr: the physical address for the translation entry
|
|
* @pci_addr: the pcie bus address for the translation entry
|
|
* @size: the size of the translation entry
|
|
*
|
|
* Return: 0 is successful and -1 is failure
|
|
*/
|
|
int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index,
|
|
int type, u64 cpu_addr,
|
|
u64 pci_addr, u32 size)
|
|
{
|
|
u32 retries, val;
|
|
|
|
dev_dbg(pci->dev, "ATU programmed with: index: %d, type: %d, cpu addr: %8llx, pci addr: %8llx, size: %8x\n",
|
|
index, type, cpu_addr, pci_addr, size);
|
|
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
|
|
lower_32_bits(cpu_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
|
|
upper_32_bits(cpu_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
|
|
lower_32_bits(cpu_addr + size - 1));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_LIMIT,
|
|
upper_32_bits(cpu_addr + size - 1));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
|
|
lower_32_bits(pci_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
|
|
upper_32_bits(pci_addr));
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
|
|
type);
|
|
dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
|
|
PCIE_ATU_ENABLE);
|
|
|
|
/*
|
|
* Make sure ATU enable takes effect before any subsequent config
|
|
* and I/O accesses.
|
|
*/
|
|
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
|
|
val = dw_pcie_readl_ob_unroll(pci, index,
|
|
PCIE_ATU_UNR_REGION_CTRL2);
|
|
if (val & PCIE_ATU_ENABLE)
|
|
return 0;
|
|
|
|
udelay(LINK_WAIT_IATU);
|
|
}
|
|
dev_err(pci->dev, "outbound iATU is not being enabled\n");
|
|
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* set_cfg_address() - Configure the PCIe controller config space access
|
|
*
|
|
* @pcie: Pointer to the PCI controller state
|
|
* @d: PCI device to access
|
|
* @where: Offset in the configuration space
|
|
*
|
|
* Configures the PCIe controller to access the configuration space of
|
|
* a specific PCIe device and returns the address to use for this
|
|
* access.
|
|
*
|
|
* Return: Address that can be used to access the configation space
|
|
* of the requested device / offset
|
|
*/
|
|
static uintptr_t set_cfg_address(struct pcie_dw *pcie,
|
|
pci_dev_t d, uint where)
|
|
{
|
|
int bus = PCI_BUS(d) - pcie->first_busno;
|
|
uintptr_t va_address;
|
|
u32 atu_type;
|
|
int ret;
|
|
|
|
/* Use dbi_base for own configuration read and write */
|
|
if (!bus) {
|
|
va_address = (uintptr_t)pcie->dbi_base;
|
|
goto out;
|
|
}
|
|
|
|
if (bus == 1)
|
|
/*
|
|
* For local bus whose primary bus number is root bridge,
|
|
* change TLP Type field to 4.
|
|
*/
|
|
atu_type = PCIE_ATU_TYPE_CFG0;
|
|
else
|
|
/* Otherwise, change TLP Type field to 5. */
|
|
atu_type = PCIE_ATU_TYPE_CFG1;
|
|
|
|
/*
|
|
* Not accessing root port configuration space?
|
|
* Region #1 is used for Outbound CFG space access.
|
|
* Direction = Outbound
|
|
* Region Index = 1
|
|
*/
|
|
d = PCI_MASK_BUS(d);
|
|
d = PCI_ADD_BUS(bus, d);
|
|
ret = pcie_dw_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1,
|
|
atu_type, (u64)pcie->cfg_base,
|
|
d << 8, pcie->cfg_size);
|
|
if (ret)
|
|
return (uintptr_t)ret;
|
|
|
|
va_address = (uintptr_t)pcie->cfg_base;
|
|
|
|
out:
|
|
va_address += where & ~0x3;
|
|
|
|
return va_address;
|
|
}
|
|
|
|
/**
|
|
* pcie_dw_addr_valid() - Check for valid bus address
|
|
*
|
|
* @d: The PCI device to access
|
|
* @first_busno: Bus number of the PCIe controller root complex
|
|
*
|
|
* Return 1 (true) if the PCI device can be accessed by this controller.
|
|
*
|
|
* Return: 1 on valid, 0 on invalid
|
|
*/
|
|
static int pcie_dw_addr_valid(pci_dev_t d, int first_busno)
|
|
{
|
|
if ((PCI_BUS(d) == first_busno) && (PCI_DEV(d) > 0))
|
|
return 0;
|
|
if ((PCI_BUS(d) == first_busno + 1) && (PCI_DEV(d) > 0))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* pcie_dw_read_config() - Read from configuration space
|
|
*
|
|
* @bus: Pointer to the PCI bus
|
|
* @bdf: Identifies the PCIe device to access
|
|
* @offset: The offset into the device's configuration space
|
|
* @valuep: A pointer at which to store the read value
|
|
* @size: Indicates the size of access to perform
|
|
*
|
|
* Read a value of size @size from offset @offset within the configuration
|
|
* space of the device identified by the bus, device & function numbers in @bdf
|
|
* on the PCI bus @bus.
|
|
*
|
|
* Return: 0 on success
|
|
*/
|
|
int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong *valuep,
|
|
enum pci_size_t size)
|
|
{
|
|
struct pcie_dw *pcie = dev_get_priv(bus);
|
|
uintptr_t va_address;
|
|
ulong value;
|
|
|
|
dev_dbg(pcie->dev, "PCIE CFG read: bdf=%2x:%2x:%2x ",
|
|
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
|
|
|
|
if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) {
|
|
debug("- out of range\n");
|
|
*valuep = pci_get_ff(size);
|
|
return 0;
|
|
}
|
|
|
|
va_address = set_cfg_address(pcie, bdf, offset);
|
|
|
|
value = readl((void __iomem *)va_address);
|
|
|
|
debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
|
|
*valuep = pci_conv_32_to_size(value, offset, size);
|
|
|
|
return pcie_dw_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_TYPE_IO, pcie->io.phys_start,
|
|
pcie->io.bus_start, pcie->io.size);
|
|
}
|
|
|
|
/**
|
|
* pcie_dw_write_config() - Write to configuration space
|
|
*
|
|
* @bus: Pointer to the PCI bus
|
|
* @bdf: Identifies the PCIe device to access
|
|
* @offset: The offset into the device's configuration space
|
|
* @value: The value to write
|
|
* @size: Indicates the size of access to perform
|
|
*
|
|
* Write the value @value of size @size from offset @offset within the
|
|
* configuration space of the device identified by the bus, device & function
|
|
* numbers in @bdf on the PCI bus @bus.
|
|
*
|
|
* Return: 0 on success
|
|
*/
|
|
int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong value,
|
|
enum pci_size_t size)
|
|
{
|
|
struct pcie_dw *pcie = dev_get_priv(bus);
|
|
uintptr_t va_address;
|
|
ulong old;
|
|
|
|
dev_dbg(pcie->dev, "PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
|
|
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
|
|
dev_dbg(pcie->dev, "(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
|
|
|
|
if (!pcie_dw_addr_valid(bdf, pcie->first_busno)) {
|
|
debug("- out of range\n");
|
|
return 0;
|
|
}
|
|
|
|
va_address = set_cfg_address(pcie, bdf, offset);
|
|
|
|
old = readl((void __iomem *)va_address);
|
|
value = pci_conv_size_to_32(old, value, offset, size);
|
|
writel(value, (void __iomem *)va_address);
|
|
|
|
return pcie_dw_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_TYPE_IO, pcie->io.phys_start,
|
|
pcie->io.bus_start, pcie->io.size);
|
|
}
|
|
|
|
/**
|
|
* pcie_dw_setup_host() - Setup the PCIe controller for RC opertaion
|
|
*
|
|
* @pcie: Pointer to the PCI controller state
|
|
*
|
|
* Configure the host BARs of the PCIe controller root port so that
|
|
* PCI(e) devices may access the system memory.
|
|
*/
|
|
void pcie_dw_setup_host(struct pcie_dw *pci)
|
|
{
|
|
struct udevice *ctlr = pci_get_controller(pci->dev);
|
|
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
|
|
u32 ret;
|
|
|
|
if (!pci->atu_base)
|
|
pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
|
|
|
|
/* setup RC BARs */
|
|
writel(PCI_BASE_ADDRESS_MEM_TYPE_64,
|
|
pci->dbi_base + PCI_BASE_ADDRESS_0);
|
|
writel(0x0, pci->dbi_base + PCI_BASE_ADDRESS_1);
|
|
|
|
/* setup interrupt pins */
|
|
clrsetbits_le32(pci->dbi_base + PCI_INTERRUPT_LINE,
|
|
0xff00, 0x100);
|
|
|
|
/* setup bus numbers */
|
|
clrsetbits_le32(pci->dbi_base + PCI_PRIMARY_BUS,
|
|
0xffffff, 0x00ff0100);
|
|
|
|
/* setup command register */
|
|
clrsetbits_le32(pci->dbi_base + PCI_PRIMARY_BUS,
|
|
0xffff,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
|
|
|
|
/* Enable write permission for the DBI read-only register */
|
|
dw_pcie_dbi_write_enable(pci, true);
|
|
/* program correct class for RC */
|
|
writew(PCI_CLASS_BRIDGE_PCI, pci->dbi_base + PCI_CLASS_DEVICE);
|
|
/* Better disable write permission right after the update */
|
|
dw_pcie_dbi_write_enable(pci, false);
|
|
|
|
setbits_le32(pci->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL,
|
|
PORT_LOGIC_SPEED_CHANGE);
|
|
|
|
for (ret = 0; ret < hose->region_count; ret++) {
|
|
if (hose->regions[ret].flags == PCI_REGION_IO) {
|
|
pci->io.phys_start = hose->regions[ret].phys_start; /* IO base */
|
|
pci->io.bus_start = hose->regions[ret].bus_start; /* IO_bus_addr */
|
|
pci->io.size = hose->regions[ret].size; /* IO size */
|
|
} else if (hose->regions[ret].flags == PCI_REGION_MEM) {
|
|
pci->mem.phys_start = hose->regions[ret].phys_start; /* MEM base */
|
|
pci->mem.bus_start = hose->regions[ret].bus_start; /* MEM_bus_addr */
|
|
pci->mem.size = hose->regions[ret].size; /* MEM size */
|
|
} else if (hose->regions[ret].flags == PCI_REGION_PREFETCH) {
|
|
pci->prefetch.phys_start = hose->regions[ret].phys_start; /* PREFETCH base */
|
|
pci->prefetch.bus_start = hose->regions[ret].bus_start; /* PREFETCH_bus_addr */
|
|
pci->prefetch.size = hose->regions[ret].size; /* PREFETCH size */
|
|
} else if (hose->regions[ret].flags == PCI_REGION_SYS_MEMORY) {
|
|
if (!pci->cfg_base) {
|
|
pci->cfg_base = (void *)(pci->io.phys_start - pci->io.size);
|
|
pci->cfg_size = pci->io.size;
|
|
}
|
|
} else {
|
|
dev_err(pci->dev, "invalid flags type!\n");
|
|
}
|
|
}
|
|
|
|
dev_dbg(pci->dev, "Config space: [0x%llx - 0x%llx, size 0x%llx]\n",
|
|
(u64)pci->cfg_base, (u64)pci->cfg_base + pci->cfg_size,
|
|
(u64)pci->cfg_size);
|
|
|
|
dev_dbg(pci->dev, "IO space: [0x%llx - 0x%llx, size 0x%llx]\n",
|
|
(u64)pci->io.phys_start, (u64)pci->io.phys_start + pci->io.size,
|
|
(u64)pci->io.size);
|
|
|
|
dev_dbg(pci->dev, "IO bus: [0x%llx - 0x%llx, size 0x%llx]\n",
|
|
(u64)pci->io.bus_start, (u64)pci->io.bus_start + pci->io.size,
|
|
(u64)pci->io.size);
|
|
|
|
dev_dbg(pci->dev, "MEM space: [0x%llx - 0x%llx, size 0x%llx]\n",
|
|
(u64)pci->mem.phys_start,
|
|
(u64)pci->mem.phys_start + pci->mem.size,
|
|
(u64)pci->mem.size);
|
|
|
|
dev_dbg(pci->dev, "MEM bus: [0x%llx - 0x%llx, size 0x%llx]\n",
|
|
(u64)pci->mem.bus_start,
|
|
(u64)pci->mem.bus_start + pci->mem.size,
|
|
(u64)pci->mem.size);
|
|
|
|
if (pci->prefetch.size) {
|
|
dev_dbg(pci->dev, "PREFETCH space: [0x%llx - 0x%llx, size 0x%llx]\n",
|
|
(u64)pci->prefetch.phys_start,
|
|
(u64)pci->prefetch.phys_start + pci->prefetch.size,
|
|
(u64)pci->prefetch.size);
|
|
|
|
dev_dbg(pci->dev, "PREFETCH bus: [0x%llx - 0x%llx, size 0x%llx]\n",
|
|
(u64)pci->prefetch.bus_start,
|
|
(u64)pci->prefetch.bus_start + pci->prefetch.size,
|
|
(u64)pci->prefetch.size);
|
|
}
|
|
}
|