u-boot/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

44 lines
1,000 B
ArmAsm

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* WORK Microwave work_92105 board low level init
*
* (C) Copyright 2014 DENX Software Engineering GmbH
* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
*
* Low level init is called from SPL to set up the clocks.
* On entry, the LPC3250 is in Direct Run mode with all clocks
* running at 13 MHz; on exit, ARM clock is 208 MHz, HCLK is
* 104 MHz and PCLK is 13 MHz.
*
* This code must run from SRAM so that the clock changes do
* not prevent it from executing.
*/
.globl lowlevel_init
lowlevel_init:
/* Set ARM, HCLK, PCLK dividers for normal mode */
ldr r0, =0x0000003D
ldr r1, =0x40004040
str r0, [r1]
/* Start HCLK PLL for 208 MHz */
ldr r0, =0x0001401E
ldr r1, =0x40004058
str r0, [r1]
/* wait for HCLK PLL to lock */
1:
ldr r0, [r1]
ands r0, r0, #1
beq 1b
/* switch to normal mode */
ldr r1, =0x40004044
ldr r0, [r1]
orr r0, #0x00000004
str r0, [r1]
/* Return to U-Boot via saved link register */
mov pc, lr