mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
2fcf033d36
Move the axp-gpio code out of the drivers/power/axp*.c code, and into a new separate axpi-gpio driver. This change drops supports for the gpio3 pin on the axp209, as that requires special handling, and no boards are using it. Besides cleaning things up by moving the code to a separate driver, as a bonus this change also adds support for the (non vusb) gpio pins on the axp221 and the gpio pins on the axp152. The new axp-gpio driver gets its own Kconfig option, and is only enabled on boards which need it. Besides that it only gets enabled in the regular u-boot build and not for the SPL as we never need it in the SPL. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
80 lines
2.7 KiB
C
80 lines
2.7 KiB
C
/*
|
|
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
|
|
*
|
|
* X-Powers AXP221 Power Management IC driver
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* Page 0 addresses */
|
|
#define AXP221_CHIP_ID 0x03
|
|
#define AXP221_OUTPUT_CTRL1 0x10
|
|
#define AXP221_OUTPUT_CTRL1_DCDC0_EN (1 << 0)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC1_EN (1 << 1)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC2_EN (1 << 2)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC3_EN (1 << 3)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC4_EN (1 << 4)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC5_EN (1 << 5)
|
|
#define AXP221_OUTPUT_CTRL1_ALDO1_EN (1 << 6)
|
|
#define AXP221_OUTPUT_CTRL1_ALDO2_EN (1 << 7)
|
|
#define AXP221_OUTPUT_CTRL2 0x12
|
|
#define AXP221_OUTPUT_CTRL2_ELDO1_EN (1 << 0)
|
|
#define AXP221_OUTPUT_CTRL2_ELDO2_EN (1 << 1)
|
|
#define AXP221_OUTPUT_CTRL2_ELDO3_EN (1 << 2)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO1_EN (1 << 3)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
|
|
#define AXP221_OUTPUT_CTRL2_DCDC1SW_EN (1 << 7)
|
|
#define AXP221_OUTPUT_CTRL3 0x13
|
|
#define AXP221_OUTPUT_CTRL3_ALDO3_EN (1 << 7)
|
|
#define AXP221_DLDO1_CTRL 0x15
|
|
#define AXP221_DLDO2_CTRL 0x16
|
|
#define AXP221_DLDO3_CTRL 0x17
|
|
#define AXP221_DLDO4_CTRL 0x18
|
|
#define AXP221_ELDO1_CTRL 0x19
|
|
#define AXP221_ELDO2_CTRL 0x1a
|
|
#define AXP221_ELDO3_CTRL 0x1b
|
|
#define AXP221_DCDC1_CTRL 0x21
|
|
#define AXP221_DCDC2_CTRL 0x22
|
|
#define AXP221_DCDC3_CTRL 0x23
|
|
#define AXP221_DCDC4_CTRL 0x24
|
|
#define AXP221_DCDC5_CTRL 0x25
|
|
#define AXP221_ALDO1_CTRL 0x28
|
|
#define AXP221_ALDO2_CTRL 0x29
|
|
#define AXP221_ALDO3_CTRL 0x2a
|
|
#define AXP221_VBUS_IPSOUT 0x30
|
|
#define AXP221_VBUS_IPSOUT_DRIVEBUS (1 << 2)
|
|
#define AXP221_MISC_CTRL 0x8f
|
|
#define AXP221_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
|
|
#define AXP221_PAGE 0xff
|
|
|
|
/* Page 1 addresses */
|
|
#define AXP221_SID 0x20
|
|
|
|
/* For axp_gpio.c */
|
|
#define AXP_POWER_STATUS 0x00
|
|
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
|
|
#define AXP_GPIO0_CTRL 0x90
|
|
#define AXP_GPIO1_CTRL 0x92
|
|
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
|
|
#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
|
|
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
|
|
#define AXP_GPIO_STATE 0x94
|
|
#define AXP_GPIO_STATE_OFFSET 0
|
|
|
|
int axp221_set_dcdc1(unsigned int mvolt);
|
|
int axp221_set_dcdc2(unsigned int mvolt);
|
|
int axp221_set_dcdc3(unsigned int mvolt);
|
|
int axp221_set_dcdc4(unsigned int mvolt);
|
|
int axp221_set_dcdc5(unsigned int mvolt);
|
|
int axp221_set_dldo1(unsigned int mvolt);
|
|
int axp221_set_dldo2(unsigned int mvolt);
|
|
int axp221_set_dldo3(unsigned int mvolt);
|
|
int axp221_set_dldo4(unsigned int mvolt);
|
|
int axp221_set_aldo1(unsigned int mvolt);
|
|
int axp221_set_aldo2(unsigned int mvolt);
|
|
int axp221_set_aldo3(unsigned int mvolt);
|
|
int axp221_set_eldo(int eldo_num, unsigned int mvolt);
|
|
int axp221_init(void);
|
|
int axp221_get_sid(unsigned int *sid);
|