mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
113e5dfcd7
Samsung SoC is supported the WIDE8, even if Controller version is v2.0. So add the SDHCI_QUIRK_USE_WIDE8 for Samsung-SoC. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
88 lines
2.2 KiB
C
88 lines
2.2 KiB
C
/*
|
|
* (C) Copyright 2012 SAMSUNG Electronics
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <sdhci.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
static char *S5P_NAME = "SAMSUNG SDHCI";
|
|
static void s5p_sdhci_set_control_reg(struct sdhci_host *host)
|
|
{
|
|
unsigned long val, ctrl;
|
|
/*
|
|
* SELCLKPADDS[17:16]
|
|
* 00 = 2mA
|
|
* 01 = 4mA
|
|
* 10 = 7mA
|
|
* 11 = 9mA
|
|
*/
|
|
sdhci_writel(host, SDHCI_CTRL4_DRIVE_MASK(0x3), SDHCI_CONTROL4);
|
|
|
|
val = sdhci_readl(host, SDHCI_CONTROL2);
|
|
val &= SDHCI_CTRL2_SELBASECLK_SHIFT;
|
|
|
|
val |= SDHCI_CTRL2_ENSTAASYNCCLR |
|
|
SDHCI_CTRL2_ENCMDCNFMSK |
|
|
SDHCI_CTRL2_ENFBCLKRX |
|
|
SDHCI_CTRL2_ENCLKOUTHOLD;
|
|
|
|
sdhci_writel(host, val, SDHCI_CONTROL2);
|
|
|
|
/*
|
|
* FCSEL3[31] FCSEL2[23] FCSEL1[15] FCSEL0[7]
|
|
* FCSel[1:0] : Rx Feedback Clock Delay Control
|
|
* Inverter delay means10ns delay if SDCLK 50MHz setting
|
|
* 01 = Delay1 (basic delay)
|
|
* 11 = Delay2 (basic delay + 2ns)
|
|
* 00 = Delay3 (inverter delay)
|
|
* 10 = Delay4 (inverter delay + 2ns)
|
|
*/
|
|
val = SDHCI_CTRL3_FCSEL0 | SDHCI_CTRL3_FCSEL1;
|
|
sdhci_writel(host, val, SDHCI_CONTROL3);
|
|
|
|
/*
|
|
* SELBASECLK[5:4]
|
|
* 00/01 = HCLK
|
|
* 10 = EPLL
|
|
* 11 = XTI or XEXTCLK
|
|
*/
|
|
ctrl = sdhci_readl(host, SDHCI_CONTROL2);
|
|
ctrl &= ~SDHCI_CTRL2_SELBASECLK_MASK(0x3);
|
|
ctrl |= SDHCI_CTRL2_SELBASECLK_MASK(0x2);
|
|
sdhci_writel(host, ctrl, SDHCI_CONTROL2);
|
|
}
|
|
|
|
int s5p_sdhci_init(u32 regbase, int index, int bus_width)
|
|
{
|
|
struct sdhci_host *host = NULL;
|
|
host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
|
|
if (!host) {
|
|
printf("sdhci__host malloc fail!\n");
|
|
return 1;
|
|
}
|
|
|
|
host->name = S5P_NAME;
|
|
host->ioaddr = (void *)regbase;
|
|
|
|
host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
|
|
SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
|
|
SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
|
|
host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
|
|
|
|
host->set_control_reg = &s5p_sdhci_set_control_reg;
|
|
host->set_clock = set_mmc_clk;
|
|
host->index = index;
|
|
|
|
host->host_caps = MMC_MODE_HC;
|
|
if (bus_width == 8)
|
|
host->host_caps |= MMC_MODE_8BIT;
|
|
|
|
return add_sdhci(host, 52000000, 400000);
|
|
}
|