u-boot/configs/uniphier_v8_defconfig
Masahiro Yamada 7e3caa81e0 Move CONFIG_PANIC_HANG to Kconfig
Freescale (NXP) boards have lots of defconfig files per board.
I used "imply PANIC_HANG" for them.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-26 13:10:24 -05:00

54 lines
1.2 KiB
Text

CONFIG_ARM=y
CONFIG_ARM_SMCCC=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ARCH_UNIPHIER_V8_MULTI=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_LOGLEVEL=6
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CONFIG=y
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_NAND=y
CONFIG_NAND_DENALI_DT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x0
CONFIG_SMC911X_32_BIT=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_UNIPHIER=y
CONFIG_USB_STORAGE=y
CONFIG_PANIC_HANG=y