u-boot/include/configs
Vipin KUMAR 7e074158ce SPEAr : Support added for SPEAr300 board
SPEAr300 SoC support contains basic spear300 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
..
manroland mpc52xx, manroland: add some commands 2009-12-07 22:50:41 +01:00
a320evb.h arm: A320: Add support for Faraday A320 evaluation board 2009-11-27 16:26:17 -06:00
A3000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
acadia.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
actux1.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux2.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux3.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux4.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ADCIOP.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Adder.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AdderUSB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADNPESC1.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ADNPESC1_base_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADS860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
aev.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
afeb9260.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
Alaska8220.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
alpr.h ppc4xx: alpr: Remove some not needed commands to make image fit again 2009-12-22 05:53:00 +01:00
amcc-common.h ppc4xx: Update flash size in reg property of the NOR flash node 2009-10-23 15:56:32 +02:00
AmigaOneG3SE.h stdio/device: rework function naming convention 2009-07-18 00:27:46 +02:00
AMX860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ap325rxa.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
AP1000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
APC405.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
apollon.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
AR405.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
aria.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
armadillo.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ASH405.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
assabet.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
at91cap9adk.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
at91rm9200dk.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
at91rm9200ek.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
at91sam9m10g45ek.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
at91sam9rlek.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
at91sam9260ek.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
at91sam9261ek.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
at91sam9263ek.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
atc.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
atngw100.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1002.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1003.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1004.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1006.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
ATUM8548.h ppc/85xx: Clean up ATUM8548 PCI setup code 2010-01-05 13:49:06 -06:00
B2.h Net: Clean up LAN91C96 Support 2009-12-14 16:42:03 -08:00
BAB7xx.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
bamboo.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
barco.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
BC3450.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
bf518f-ezbrd.h Blackfin: bf518f-ezbrd: increase monitor length 2010-01-17 09:17:27 -05:00
bf526-ezbrd.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf527-ezkit.h Blackfin: add support for BF527-EZKIT v2.1 2010-01-17 09:17:27 -05:00
bf533-ezkit.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
bf533-stamp.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-minotaur.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-pnav.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-srv1.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-stamp.h Blackfin: bf537-stamp: rename SPI/MMC define 2010-01-17 09:17:26 -05:00
bf538f-ezkit.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf548-ezkit.h Blackfin: convert bfin_sdh to generic mmc 2010-01-17 09:17:27 -05:00
bf561-acvilon.h Blackfin: bf561-acvilon: new board port 2010-01-17 09:17:26 -05:00
bf561-ezkit.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bfin_adi_common.h Blackfin: add support for kgdb 2010-01-17 20:36:09 -05:00
blackstamp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
BMW.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
bubinga.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
c2mon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CANBT.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
canmb.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
canyonlands.h ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z) 2009-11-09 13:30:19 +01:00
CATcenter.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CCM.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
cerf250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
cm-bf527.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf533.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf537e.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf537u.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf548.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf561.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm41xx.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm4008.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm5200.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
cmc_pu2.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
cmi_mpc5xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
CMS700.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
cobra5272.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
cogent_mpc8260.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPC45.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CPCI2DP.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
CPCI405.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPCI405AB.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPCI405DT.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPCI750.h 74xx_7xx: CPCI750: Add CPCI adapter/target support 2009-06-12 20:47:18 +02:00
CPCI4052.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
cpci5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
CPCIISER4.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
CPU86.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CPU87.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
cpu9260.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
cpuat91.h AT91 CPUAT91 Fix compiler warning 2009-10-18 16:40:15 -05:00
cradle.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
CRAYL1.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
csb226.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
csb272.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
csb472.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
csb637.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
CU824.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
da830evm.h DA830: Add usb config 2010-01-09 10:25:07 +01:00
DASA_SIM.h ppc4xx: Update TEXT_BASE for DASA_SIM boards 2009-03-20 22:39:13 +01:00
davinci_dm355evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm355leopard.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm365evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm6467evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dvevm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_schmoogie.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_sffsdr.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_sonata.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
DB64360.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
DB64460.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
dbau1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
debris.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
delta.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
devkit8000.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
digsy_mtc.h digsy_mtc: Add TCR register value for RTC (DS1339) 2009-09-24 00:21:06 +02:00
DK1C20.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
DK1C20_safe_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1C20_standard_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
DK1S10_mtx_ldk_20.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10_safe_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10_standard_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
dlvision.h ppc4xx: Add DL-Vision 405EP board support 2009-07-24 06:42:31 +02:00
dnp1110.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
DP405.h 4xx: Remove binary cpld bitstream from DP405 board 2009-06-12 20:39:47 +02:00
DU405.h i2c: Remove deprecated individual i2c commands 2009-06-12 20:39:46 +02:00
DU440.h ppc4xx: Consolidate pci_target_init() function 2009-11-19 11:35:08 +01:00
EB+MCF-EV123.h update the EB+MCF-EV123 board support 2009-07-26 13:19:23 +02:00
ebony.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ELPPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ELPT860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
eNET.h i386: Final Relocation 2009-12-05 01:05:39 +01:00
EP1C20.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
EP1S10.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
EP1S40.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ep82xxm.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
EP88x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep7312.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ep8248.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ep8260.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ERIC.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
espt.h sh: Add support ESPT-GIGA borad 2009-07-11 09:02:21 +09:00
ESTEEM192E.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ETX094.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
evb4510.h arm: clean cache management 2009-04-05 13:06:31 +02:00
EVB64260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
eXalion.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
EXBITGEN.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
FADS823.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS850SAR.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
favr-32-ezkit.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
FLAGADM.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
FPS850L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
FPS860L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
fx12mm.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
G2000.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
galaxy5200.h galaxy5200: Add default environment variables 2009-10-28 21:46:21 +01:00
gcplus.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
gdppc440etx.h ppc4xx: Add GDsys PowerPC 440 ETX board support. 2009-01-26 10:13:30 +01:00
GEN860T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
GENIETV.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_ep2s60.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_xc3s_1500.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
grsim.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
grsim_leon2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
GTH.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gth2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
gw8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hammerhead.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
hcu4.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hcu5.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hermes.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HH405.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
HIDDEN_DRAGON.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
HMI10.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
hmi1001.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
HUB405.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
hymod.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IAD210.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
ibf-dsp561.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
IceCube.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
ICU862.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
idmr.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
IDS8247.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
impa7.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
imx27lite.h Merge branch 'next' of ../next 2009-12-15 23:38:34 +01:00
imx31_litekit.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
imx31_phycore.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
incaip.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
inka4x0.h ppc: Remove board-specific command table relocation fixups 2009-10-03 10:17:56 +02:00
innokom.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
integratorap.h integratorap/cp: use cfi driver 2009-06-23 00:10:04 +02:00
integratorcp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
intip.h ppc4xx: Make DDR2 timing for intip more robust 2009-09-23 15:46:02 +02:00
IP860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ipek01.h mpc52xx: add support for the IPEK01 board 2009-10-31 16:14:35 +01:00
IPHASE4539.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ISPAN.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IVML24.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
IVMS8.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ixdp425.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ixdpg425.h arm: timer and interrupt init rework 2009-06-12 20:39:48 +02:00
JSE.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
jupiter.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
KAREF.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
katmai.h ppc4xx: Katmai: Add chip_config command 2009-11-10 15:09:37 +01:00
kb9202.h at91rm9200: move serial driver to drivers/serial 2009-04-04 20:42:20 +02:00
keymile-common.h powerpc: keymile boards updates 2010-01-18 00:43:54 +01:00
kilauea.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
km8xx.h powerpc: updates for the keymile boards 2009-07-21 00:06:11 +02:00
kmeter1.h powerpc: keymile boards updates 2010-01-18 00:43:54 +01:00
kmsupx4.h 8xx: add support for new keymile kmsupx4 board. 2009-03-18 20:50:05 +01:00
korat.h ppc4xx: Consolidate pci_pre_init() function 2009-11-19 11:35:30 +01:00
KUP4K.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
KUP4X.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
kvme080.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
LANTEC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
lart.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
linkstation.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
logodl.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
lpc2292sodimm.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
lpd7a400-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a400.h lh7a40x: move serial driver to drivers/serial 2009-06-12 20:39:53 +02:00
lpd7a404-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a404.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
luan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lubbock.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
lwmon.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
lwmon5.h video: mb862xx: add option VIDEO_FB_16BPP_WORD_SWAP for IPEK01 2009-10-31 12:17:40 +01:00
m501sk.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
M5208EVBE.h ColdFire: Add M5208EVB and MCF520x CPU support 2009-07-14 09:27:17 -05:00
M5235EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5249EVB.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
M5253DEMO.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
M5253EVBE.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
M5271EVB.h Coldfire: M5271EVB: Board header update (dependencies) 2009-02-06 14:54:47 -07:00
M5272C3.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5275EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5282EVB.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
M5329EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5373EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5475EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5485EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M52277EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M53017EVB.h ColdFire: Update bootargs 2009-07-14 09:46:42 -05:00
M54451EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M54455EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
makalu.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX860T.h ppc: cleanup compiler errors/warnings 2009-03-27 20:23:32 +01:00
mcc200.h mcc200: fix build error 2009-10-19 09:18:57 +02:00
mcu25.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
mecp5123.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
mecp5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
meesc.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
METROBOX.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
mgcoge.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
mgsuvd.h 8xx, mgsuvd: rename board to a more generic name 2009-03-18 20:50:04 +01:00
MHPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
microblaze-generic.h microblaze: Stop stack clobbering in microblaze-generic. 2009-12-08 08:51:42 +01:00
MigoR.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
mimc200.h MIMC200: set default fbmem value 2009-11-22 22:07:17 +01:00
MIP405.h Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
ML2.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ml300.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ml507.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
modnet50.h netarm: move serial driver to drivers/serial 2009-03-29 23:01:41 +02:00
motionpro.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
MOUSSE.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mp2usb.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
MPC86xADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC832XEMDS.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC837XEMDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC837XERDB.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC885ADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc5121ads.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
mpc7448hpc2.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
MPC8260ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8266ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8313ERDB.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8315ERDB.h mpc83xx: Add NAND boot support for MPC8315E-RDB boards 2010-01-07 18:33:52 -06:00
MPC8323ERDB.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8349EMDS.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8349ITX.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8360EMDS.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8360ERDK.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8536DS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8540ADS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8540EVAL.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8541CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8544DS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8548CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8555CDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8560ADS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8568MDS.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8569MDS.h mpc85xx: Add 4-bits eSDHC support for MPC8569E-MDS boards 2010-01-05 13:49:10 -06:00
MPC8572DS.h ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START 2010-01-05 13:49:08 -06:00
MPC8610HPCD.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
MPC8641HPCN.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
mpr2.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7720se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7722se.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ms7750se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
muas3001.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
mucmc52.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
munices.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
MUSENKI.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mv88f6281gtw_ge.h Marvell MV88F6281GTW_GE Board support 2009-07-18 20:41:42 +02:00
MVBC_P.h Remove deprecated 'autoscr' command/variables 2009-09-22 23:03:24 +02:00
MVBLM7.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MVBLUE.h MVBLUE: Remove CONFIG_CMD_IRQ 2009-12-14 21:31:17 +01:00
MVS1.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
mx1ads.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
mx1fs2.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
mx31ads.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
mx31pdk.h MX31: Activate NAND environment on i.MX31 PDK board. 2010-01-19 17:08:13 -06:00
NC650.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
neo.h ppc4xx: Add GDSys neo 405EP board support 2008-10-21 17:35:02 +02:00
NETPHONE.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
netstal-common.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
netstar.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
NETTA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETTA2.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETVIA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
nhk8815.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
ns9750dev.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
NSCU.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
NX823.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
o2dnt.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
ocotea.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
OCRTC.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
omap3_beagle.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap3_evm.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap3_overo.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap3_pandora.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap3_sdp3430.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap3_zoom1.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap3_zoom2.h OMAP3 zoom2 Use usbtty if the debug board is not connected. 2009-12-20 12:51:51 +01:00
omap730.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap730p2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1510.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap1510inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610h2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap2420h4.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap5912osk.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
openrd_base.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
ORSG.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
OXC.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
P1_P2_RDB.h ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START 2010-01-05 13:49:08 -06:00
P3G4.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
p3mx.h p3mx: Remove serial relocation fixups 2009-10-03 10:17:57 +02:00
p3p440.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
P2020DS.h ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START 2010-01-05 13:49:08 -06:00
PATI.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
pb1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCI405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
PCI5441.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCIPPC2.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PCIPPC6.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
pcm030.h board support patch for phyCORE-MPC5200B-tiny 2009-07-10 23:21:32 +02:00
pcs440ep.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
pcu_e.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
pdnb3.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
pf5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
PIP405.h Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
PK1C20.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
pleb2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
PLU405.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
PM520.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM826.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM828.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM854.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
PM856.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
pm9261.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
pm9263.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
PMC405.h ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards 2009-09-10 14:38:17 +02:00
PMC405DE.h ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards 2009-09-10 14:38:17 +02:00
PMC440.h ppc4xx: Remove unused features from PMC440 board support 2009-11-19 11:39:43 +01:00
PN62.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
PPChameleonEVB.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
ppmc7xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ppmc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
purple.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
pxa255_idp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
qemu-mips.h Refresh LZMA-lib to v4.65 2009-07-22 09:43:27 +02:00
qong.h serial_mx31: allow it to work with mx27 too and rename to serial_mxc 2009-06-21 16:18:13 +02:00
QS823.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS850.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
quad100hd.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
quantum.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
r2dplus.h Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:37:59 +02:00
R360MPI.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
r7780mp.h r7780mp: fix typo in Ethernet chip model number comment. 2009-09-10 23:11:03 +02:00
Rattler.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
RBC823.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
rd6281a.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
redwood.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rmu.h rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared 2009-06-10 00:15:11 +02:00
RPXClassic.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
RPXlite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXlite_DW.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXsuper.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
RRvision.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsdproto.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsk7203.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
sacsng.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
Sandpoint8240.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Sandpoint8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sbc35_a9g20.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
sbc405.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
sbc2410x.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
sbc8240.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sbc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8349.h sbc8349: fix incorrect comment 2009-10-28 22:07:56 +01:00
SBC8540.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8548.h sbc8548: reclaim wasted sector in boot flash 2009-09-30 08:29:47 -05:00
sbc8560.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8641d.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
sc3.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
sc520_cdp.h i386: Fix malloc initialization 2009-12-05 01:02:10 +01:00
sc520_spunk.h i386: Fix malloc initialization 2009-12-05 01:02:10 +01:00
sc520_spunk_rel.h * Code cleanup: 2003-06-27 21:31:46 +00:00
scb9328.h Convert DM9000 driver for CONFIG_NET_MULTI 2009-06-15 00:13:55 -07:00
SCM.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sequoia.h Adds EHCI definitions to sequoia board configuration file. 2010-01-09 10:27:21 +01:00
sh7763rdp.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
sh7785lcr.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
shannon.h arm: clean cache management 2009-04-05 13:06:31 +02:00
sheevaplug.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
SIMPC8313.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
SL8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SM850.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
smdk2400.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk2410.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk6400.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
smdkc100.h s5pc1xx: update cache routines 2010-01-23 08:15:48 -06:00
smmaco4.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
SMN42.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
socrates.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
sorcery.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
spc1920.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SPD823TS.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
spear-common.h SPEAr : Support added for SPEAr600 board 2010-01-23 08:15:49 -06:00
spear3xx.h SPEAr : Support added for SPEAr300 board 2010-01-23 08:15:50 -06:00
spear6xx.h SPEAr : Support added for SPEAr600 board 2010-01-23 08:15:49 -06:00
spieval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
stxgp3.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
stxssa.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
stxxtc.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
svm_sc8xx.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
SX1.h arm925t: Fix CONFIG_SYS_HZ to 1000 2009-04-29 21:39:46 +02:00
SXNI855T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
taihu.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
taishan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TASREG.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
tb0229.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TB5200.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
tcm-bf518.h Blackfin: tcm-bf518: new board port 2010-01-17 09:17:27 -05:00
tcm-bf537.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
TK885D.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
tny_a9260.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
TOP860.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
TOP5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
Total5200.h mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c 2009-03-18 20:54:56 +01:00
TQM85xx.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
TQM823L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM823M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM834x.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
TQM850L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM850M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM855L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM855M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM860L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM860M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM862L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM862M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM866M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM885D.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM5200.h tqm5200: Correct comment and code in post_hotkeys_pressed. 2009-10-08 00:31:23 +02:00
TQM8260.h TQM8260: fix locations of kernel and ramdisk images in flash 2009-02-17 10:26:38 +01:00
TQM8272.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
trab.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
trizepsiv.h xscale: add support for the polaris board 2009-07-06 21:52:58 +02:00
uc100.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
uc101.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
utx8245.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
v5fx30teval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
v37.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
v38b.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
VCMA9.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
vct.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
versatile.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
virtlab2.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
vme8349.h mpc83xx: Add support for MPC8349 esd caddy2 2010-01-07 18:34:31 -06:00
VOH405.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
voiceblue.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
VOM405.h 4xx: Remove binary cpld bitstream from VOM405 board 2009-06-12 20:39:46 +02:00
VoVPN-GW.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
W7OLMC.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
W7OLMG.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
walnut.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
wepep250.h pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
WUH405.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
xaeniax.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
xilinx-ppc.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
xilinx-ppc405-generic.h ppc4xx: Generic architecture for xilinx ppc405(v3) 2008-10-24 17:26:09 +02:00
xilinx-ppc405.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx-ppc440.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xm250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
XPEDITE1000.h xpedite1k: Move to X-ES vendor directory 2009-07-24 06:42:32 +02:00
XPEDITE5170.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
XPEDITE5200.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
XPEDITE5370.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
xsengine.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
yosemite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
yucca.h ppc4xx: Consolidate 4xx PCIe board specific configuration 2009-11-09 11:26:57 +01:00
Yukon8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
zeus.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
ZPC1900.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ZUMA.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
zylonite.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00