mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
8aa5e6973c
The Gateworks imx8mp-venice-gw73xx-2x consists of a SOM + baseboard. The GW702x SOM contains the following: - i.MX8M Plus SoC - LPDDR4 memory - eMMC Boot device - Gateworks System Controller (GSC) with integrated EEPROM, button controller, and ADC's - PMIC - SOM connector providing: - eQoS GbE MII - 1x SPI - 2x I2C - 4x UART - 2x USB 3.0 - 1x PCI - 1x SDIO (4-bit 3.3V) - 1x SDIO (4-bit 3.3V/1.8V) - GPIO The GW73xx Baseboard contains the following: - 1x RJ45 GbE (eQoS from SOM) - 1x RJ45 GbE (PCI) - off-board I/O connector with MIPI-CSI (3-lane), MIPI-DSI (4-lane), - off-board I/O connector with RS232/RS485 - off-board I/O connector with SPI - off-board I/O connector with I2C, UART, and GPIO I2C, I2S and GPIO - microSD (1.8V/3.3V) - GPS - Accelerometer - EERPOM - USB 3.0 Hub - Front Panel bi-color LED - re-chargeable battery (for RTC) - PCIe clock generator - PCIe switch - on-board 802.11abgnac 1x1 WiFi and Bluetooth 5.2 - 1x USB Type-A host socket with USB 3.0 support - 1x USB OTG with USB 2.0 support - 2x MiniPCIe socket with PCI and USB 2.0 - 1x MiniPCIe socket with SIM, PCI/USB 3.0 (mux), and USB 2.0 - Wide range DC input supply Signed-off-by: Tim Harvey <tharvey@gateworks.com>
95 lines
1.4 KiB
Text
95 lines
1.4 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2023 Gateworks Corporation
|
|
*/
|
|
#include "imx8mp-venice-gw702x-u-boot.dtsi"
|
|
|
|
ðphy0 {
|
|
reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <1000>;
|
|
reset-post-delay-us = <300000>;
|
|
};
|
|
|
|
&gpio4 {
|
|
dio_1 {
|
|
gpio-hog;
|
|
input;
|
|
gpios = <8 GPIO_ACTIVE_HIGH>;
|
|
line-name = "dio1";
|
|
};
|
|
|
|
dio_0 {
|
|
gpio-hog;
|
|
input;
|
|
gpios = <11 GPIO_ACTIVE_HIGH>;
|
|
line-name = "dio0";
|
|
};
|
|
|
|
pci_usb_sel {
|
|
gpio-hog;
|
|
output-low;
|
|
gpios = <14 GPIO_ACTIVE_HIGH>;
|
|
line-name = "pci_usb_sel";
|
|
};
|
|
|
|
mipi_gpio4 {
|
|
gpio-hog;
|
|
input;
|
|
gpios = <17 GPIO_ACTIVE_HIGH>;
|
|
line-name = "mipi_gpio4";
|
|
};
|
|
|
|
rs485_en {
|
|
gpio-hog;
|
|
output-low;
|
|
gpios = <22 GPIO_ACTIVE_HIGH>;
|
|
line-name = "rs485_en";
|
|
};
|
|
|
|
rs485_term {
|
|
gpio-hog;
|
|
output-low;
|
|
gpios = <23 GPIO_ACTIVE_HIGH>;
|
|
line-name = "rs485_term";
|
|
};
|
|
|
|
mipi_gpio1 {
|
|
gpio-hog;
|
|
input;
|
|
gpios = <24 GPIO_ACTIVE_HIGH>;
|
|
line-name = "mipi_gpio1";
|
|
};
|
|
|
|
mipi_gpio3 {
|
|
gpio-hog;
|
|
input;
|
|
gpios = <25 GPIO_ACTIVE_HIGH>;
|
|
line-name = "mipi_gpio3";
|
|
};
|
|
|
|
mipi_gpio2 {
|
|
gpio-hog;
|
|
input;
|
|
gpios = <26 GPIO_ACTIVE_HIGH>;
|
|
line-name = "mipi_gpio2";
|
|
};
|
|
|
|
rs485_hd {
|
|
gpio-hog;
|
|
output-low;
|
|
gpios = <27 GPIO_ACTIVE_HIGH>;
|
|
line-name = "rs485_hd";
|
|
};
|
|
|
|
pci_wdis {
|
|
gpio-hog;
|
|
output-high;
|
|
gpios = <28 GPIO_ACTIVE_HIGH>;
|
|
line-name = "pci_wdis#";
|
|
};
|
|
};
|
|
|
|
/* gpio-usb-con not supported yet in U-Boot so make this a host for now */
|
|
&usb_dwc3_0 {
|
|
dr_mode = "host";
|
|
};
|