u-boot/board/freescale/t4rdb/cpld.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

48 lines
1.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/**
* Copyright 2014 Freescale Semiconductor
*
* Author: Chunhe Lan <Chunhe.Lan@freescale.com>
*
* This file provides support for the ngPIXIS, a board-specific FPGA used on
* some Freescale reference boards.
*/
/*
* CPLD register set. Feel free to add board-specific #ifdefs where necessary.
*/
struct cpld_data {
u8 chip_id1; /* 0x00 - CPLD Chip ID1 Register */
u8 chip_id2; /* 0x01 - CPLD Chip ID2 Register */
u8 sw_maj_ver; /* 0x02 - CPLD Code Major Version Register */
u8 sw_min_ver; /* 0x03 - CPLD Code Minor Version Register */
u8 hw_ver; /* 0x04 - PCBA Version Register */
u8 software_on; /* 0x05 - Override Physical Switch Enable Register */
u8 cfg_rcw_src; /* 0x06 - RCW Source Location Control Register */
u8 res0; /* 0x07 - not used */
u8 vbank; /* 0x08 - Flash Bank Selection Control Register */
u8 sw1_sysclk; /* 0x09 - SW1 Status Read Back Register */
u8 sw2_status; /* 0x0a - SW2 Status Read Back Register */
u8 sw3_status; /* 0x0b - SW3 Status Read Back Register */
u8 sw4_status; /* 0x0c - SW4 Status Read Back Register */
u8 sys_reset; /* 0x0d - Reset System With Reserving Registers Value*/
u8 global_reset;/* 0x0e - Reset System With Default Registers Value */
u8 res1; /* 0x0f - not used */
};
#define CPLD_BANK_SEL_MASK 0x07
#define CPLD_BANK_SEL_EN 0x04
#define CPLD_SYSTEM_RESET 0x01
#define CPLD_SELECT_BANK0 0x00
#define CPLD_SELECT_BANK4 0x04
#define CPLD_DEFAULT_BANK 0x01
/* Pointer to the CPLD register set */
u8 cpld_read(unsigned int reg);
void cpld_write(unsigned int reg, u8 value);
#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
#define CPLD_WRITE(reg, value) \
cpld_write(offsetof(struct cpld_data, reg), value)