mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 16:39:35 +00:00
c9bb942e2f
Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
320 lines
9.8 KiB
C
320 lines
9.8 KiB
C
/*
|
|
* tseries.h
|
|
*
|
|
* specific parts for B&R T-Series Motherboard
|
|
*
|
|
* Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
|
|
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_TSERIES_H__
|
|
#define __CONFIG_TSERIES_H__
|
|
|
|
#include <configs/bur_am335x_common.h>
|
|
/* ------------------------------------------------------------------------- */
|
|
#define CONFIG_AM335X_LCD
|
|
#define CONFIG_LCD
|
|
#define CONFIG_LCD_ROTATION
|
|
#define CONFIG_LCD_DT_SIMPLEFB
|
|
#define CONFIG_SYS_WHITE_ON_BLACK
|
|
#define LCD_BPP LCD_COLOR32
|
|
|
|
#define CONFIG_HW_WATCHDOG
|
|
#define CONFIG_OMAP_WATCHDOG
|
|
#define CONFIG_SPL_WATCHDOG_SUPPORT
|
|
|
|
#define CONFIG_SPL_GPIO_SUPPORT
|
|
/* Bootcount using the RTC block */
|
|
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
|
|
#define CONFIG_BOOTCOUNT_LIMIT
|
|
#define CONFIG_BOOTCOUNT_AM33XX
|
|
/* Clock Defines */
|
|
#define V_OSCK 26000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
#define CONFIG_POWER_TPS65217
|
|
|
|
/* Support both device trees and ATAGs. */
|
|
#define CONFIG_OF_LIBFDT
|
|
#define CONFIG_USE_FDT /* use fdt within board code */
|
|
#define CONFIG_OF_BOARD_SETUP
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_CMD_BOOTZ
|
|
/*#define CONFIG_MACH_TYPE 3589*/
|
|
#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/
|
|
|
|
/* MMC/SD IP block */
|
|
#if defined(CONFIG_EMMC_BOOT)
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_OMAP_HSMMC
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
/* RAW SD card / eMMC locations. */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */
|
|
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#endif /* CONFIG_EMMC_BOOT */
|
|
|
|
/*
|
|
* When we have SPI or NAND flash we expect to be making use of mtdparts,
|
|
* both for ease of use in U-Boot and for passing information on to
|
|
* the Linux kernel.
|
|
*/
|
|
#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND)
|
|
#define CONFIG_MTD_DEVICE /* Required for mtdparts */
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#endif /* CONFIG_SPI_BOOT, ... */
|
|
|
|
#undef CONFIG_SPL_OS_BOOT
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000
|
|
|
|
/* RAW SD card / eMMC */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
|
|
|
|
/* NAND */
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000
|
|
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
|
|
#endif /* CONFIG_NAND */
|
|
#endif /* CONFIG_SPL_OS_BOOT */
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SPL_NAND_BASE
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
|
#define CONFIG_SPL_NAND_ECC
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
|
#endif /* CONFIG_NAND */
|
|
|
|
/* Always 64 KiB env size */
|
|
#define CONFIG_ENV_SIZE (64 << 10)
|
|
|
|
#ifdef CONFIG_NAND
|
|
#define NANDARGS \
|
|
"mtdids=" MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"${optargs_rot} " \
|
|
"root=mtd6 " \
|
|
"rootfstype=jffs2\0" \
|
|
"kernelsize=0x400000\0" \
|
|
"nandboot=echo booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"nand read ${loadaddr} kernel ${kernelsize}; " \
|
|
"bootz ${loadaddr} - ${dtbaddr}\0" \
|
|
"defboot=run nandboot\0" \
|
|
"bootlimit=1\0" \
|
|
"simplefb=1\0 " \
|
|
"altbootcmd=run usbscript\0"
|
|
#else
|
|
#define NANDARGS ""
|
|
#endif /* CONFIG_NAND */
|
|
|
|
#ifdef CONFIG_MMC
|
|
#define MMCARGS \
|
|
"dtbdev=mmc\0" \
|
|
"dtbpart=0:1\0" \
|
|
"mmcroot0=setenv bootargs ${optargs_rot} ${optargs} console=${console}\0" \
|
|
"mmcroot1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
|
|
"root=/dev/mmcblk0p2 rootfstype=ext4\0" \
|
|
"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \
|
|
"setenv simplefb 1; " \
|
|
"ext4load mmc 0:1 ${loadaddr} /${kernel}; " \
|
|
"ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \
|
|
"run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \
|
|
"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \
|
|
"setenv simplefb 0; " \
|
|
"ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \
|
|
"run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \
|
|
"defboot=ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \
|
|
"ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \
|
|
"run ramboot; run usbscript;\0" \
|
|
"bootlimit=1\0" \
|
|
"altbootcmd=run mmcboot0;\0" \
|
|
"upduboot=dhcp; " \
|
|
"tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \
|
|
"tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0"
|
|
#else
|
|
#define MMCARGS ""
|
|
#endif /* CONFIG_MMC */
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BUR_COMMON_ENV \
|
|
"verify=no\0" \
|
|
"autoload=0\0" \
|
|
"dtb=bur-ppt-ts30.dtb\0" \
|
|
"dtbaddr=0x80100000\0" \
|
|
"loadaddr=0x80200000\0" \
|
|
"ramaddr=0x80A00000\0" \
|
|
"kernel=zImage\0" \
|
|
"ramdisk=rootfs.cpio.uboot\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"optargs=consoleblank=0 quiet panic=2\0" \
|
|
"nfsroot=/tftpboot/tseries/rootfs-small\0" \
|
|
"nfsopts=nolock\0" \
|
|
"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=/dev/nfs " \
|
|
"nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \
|
|
"ip=dhcp\0" \
|
|
"netboot=echo Booting from network ...; " \
|
|
"dhcp; " \
|
|
"tftp ${loadaddr} ${kernel}; " \
|
|
"tftp ${dtbaddr} ${dtb}; " \
|
|
"run netargs; " \
|
|
"bootz ${loadaddr} - ${dtbaddr}\0" \
|
|
"ramboot=echo Booting from network into RAM ...; "\
|
|
"if dhcp; then; " \
|
|
"tftp ${loadaddr} ${kernel}; " \
|
|
"tftp ${ramaddr} ${ramdisk}; " \
|
|
"if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \
|
|
"then; else tftp ${dtbaddr} ${dtb}; fi;" \
|
|
"run mmcroot0; " \
|
|
"bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \
|
|
"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
|
|
"setenv autoload 0; " \
|
|
"dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \
|
|
NANDARGS \
|
|
MMCARGS
|
|
#endif /* !CONFIG_SPL_BUILD*/
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run defboot;"
|
|
#define CONFIG_BOOTDELAY 0
|
|
|
|
#ifdef CONFIG_NAND
|
|
/*
|
|
* GPMC block. We support 1 device and the physical address to
|
|
* access CS0 at is 0x8000000.
|
|
*/
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x8000000
|
|
#define CONFIG_NAND_OMAP_GPMC
|
|
#define CONFIG_CMD_NAND
|
|
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
|
|
#define CONFIG_NAND_OMAP_ELM
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
|
|
|
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
|
|
"128k(MLO)," \
|
|
"128k(MLO.backup)," \
|
|
"128k(dtb)," \
|
|
"128k(u-boot-env)," \
|
|
"512k(u-boot)," \
|
|
"4m(kernel),"\
|
|
"128m(rootfs),"\
|
|
"-(user)"
|
|
#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
|
|
#endif /* CONFIG_NAND */
|
|
|
|
/* USB configuration */
|
|
#define CONFIG_USB_MUSB_DSPS
|
|
#define CONFIG_ARCH_MISC_INIT
|
|
#define CONFIG_MUSB_PIO_ONLY
|
|
#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
|
|
/* attention! not only for gadget, enables also highspeed in hostmode */
|
|
#define CONFIG_USB_GADGET_DUALSPEED
|
|
#define CONFIG_MUSB_HOST
|
|
#define CONFIG_AM335X_USB0
|
|
#define CONFIG_AM335X_USB0_MODE MUSB_HOST
|
|
#define CONFIG_AM335X_USB1
|
|
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
|
|
|
|
#ifdef CONFIG_MUSB_HOST
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_USB_STORAGE
|
|
#endif /* CONFIG_MUSB_HOST */
|
|
|
|
#if defined(CONFIG_SPI_BOOT)
|
|
/* McSPI IP block */
|
|
#define CONFIG_SPI
|
|
#define CONFIG_OMAP3_SPI
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
#define CONFIG_SF_DEFAULT_SPEED 24000000
|
|
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
|
|
#undef CONFIG_ENV_IS_NOWHERE
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
|
|
#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
|
|
#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
|
|
|
|
#elif defined(CONFIG_EMMC_BOOT)
|
|
#undef CONFIG_ENV_IS_NOWHERE
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_SYS_MMC_ENV_PART 2
|
|
#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
|
|
#elif defined(CONFIG_NAND)
|
|
/* No NAND env support in SPL */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#endif
|
|
#define CONFIG_ENV_OFFSET 0x60000
|
|
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
|
|
#else
|
|
#error "no storage for Environment defined!"
|
|
#endif
|
|
/*
|
|
* Common filesystems support. When we have removable storage we
|
|
* enabled a number of useful commands and support.
|
|
*/
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_FAT_WRITE
|
|
#define CONFIG_FS_EXT4
|
|
#define CONFIG_EXT4_WRITE
|
|
#define CONFIG_CMD_EXT4
|
|
#define CONFIG_CMD_EXT4_WRITE
|
|
#define CONFIG_CMD_FS_GENERIC
|
|
#endif /* CONFIG_MMC, ... */
|
|
|
|
#endif /* ! __CONFIG_TSERIES_H__ */
|