mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
cd93d625fd
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
236 lines
6.4 KiB
C
236 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Meson8, Meson8b and GXBB USB2 PHY driver
|
|
*
|
|
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
* Copyright (C) 2018 BayLibre, SAS
|
|
*
|
|
* Author: Beniamino Galvani <b.galvani@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <generic-phy.h>
|
|
#include <power/regulator.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#define REG_CONFIG 0x00
|
|
#define REG_CONFIG_CLK_EN BIT(0)
|
|
#define REG_CONFIG_CLK_SEL_MASK GENMASK(3, 1)
|
|
#define REG_CONFIG_CLK_DIV_MASK GENMASK(10, 4)
|
|
#define REG_CONFIG_CLK_32k_ALTSEL BIT(15)
|
|
#define REG_CONFIG_TEST_TRIG BIT(31)
|
|
|
|
#define REG_CTRL 0x04
|
|
#define REG_CTRL_SOFT_PRST BIT(0)
|
|
#define REG_CTRL_SOFT_HRESET BIT(1)
|
|
#define REG_CTRL_SS_SCALEDOWN_MODE_MASK GENMASK(3, 2)
|
|
#define REG_CTRL_CLK_DET_RST BIT(4)
|
|
#define REG_CTRL_INTR_SEL BIT(5)
|
|
#define REG_CTRL_CLK_DETECTED BIT(8)
|
|
#define REG_CTRL_SOF_SENT_RCVD_TGL BIT(9)
|
|
#define REG_CTRL_SOF_TOGGLE_OUT BIT(10)
|
|
#define REG_CTRL_POWER_ON_RESET BIT(15)
|
|
#define REG_CTRL_SLEEPM BIT(16)
|
|
#define REG_CTRL_TX_BITSTUFF_ENN_H BIT(17)
|
|
#define REG_CTRL_TX_BITSTUFF_ENN BIT(18)
|
|
#define REG_CTRL_COMMON_ON BIT(19)
|
|
#define REG_CTRL_REF_CLK_SEL_MASK GENMASK(21, 20)
|
|
#define REG_CTRL_REF_CLK_SEL_SHIFT 20
|
|
#define REG_CTRL_FSEL_MASK GENMASK(24, 22)
|
|
#define REG_CTRL_FSEL_SHIFT 22
|
|
#define REG_CTRL_PORT_RESET BIT(25)
|
|
#define REG_CTRL_THREAD_ID_MASK GENMASK(31, 26)
|
|
|
|
/* bits [31:26], [24:21] and [15:3] seem to be read-only */
|
|
#define REG_ADP_BC 0x0c
|
|
#define REG_ADP_BC_VBUS_VLD_EXT_SEL BIT(0)
|
|
#define REG_ADP_BC_VBUS_VLD_EXT BIT(1)
|
|
#define REG_ADP_BC_OTG_DISABLE BIT(2)
|
|
#define REG_ADP_BC_ID_PULLUP BIT(3)
|
|
#define REG_ADP_BC_DRV_VBUS BIT(4)
|
|
#define REG_ADP_BC_ADP_PRB_EN BIT(5)
|
|
#define REG_ADP_BC_ADP_DISCHARGE BIT(6)
|
|
#define REG_ADP_BC_ADP_CHARGE BIT(7)
|
|
#define REG_ADP_BC_SESS_END BIT(8)
|
|
#define REG_ADP_BC_DEVICE_SESS_VLD BIT(9)
|
|
#define REG_ADP_BC_B_VALID BIT(10)
|
|
#define REG_ADP_BC_A_VALID BIT(11)
|
|
#define REG_ADP_BC_ID_DIG BIT(12)
|
|
#define REG_ADP_BC_VBUS_VALID BIT(13)
|
|
#define REG_ADP_BC_ADP_PROBE BIT(14)
|
|
#define REG_ADP_BC_ADP_SENSE BIT(15)
|
|
#define REG_ADP_BC_ACA_ENABLE BIT(16)
|
|
#define REG_ADP_BC_DCD_ENABLE BIT(17)
|
|
#define REG_ADP_BC_VDAT_DET_EN_B BIT(18)
|
|
#define REG_ADP_BC_VDAT_SRC_EN_B BIT(19)
|
|
#define REG_ADP_BC_CHARGE_SEL BIT(20)
|
|
#define REG_ADP_BC_CHARGE_DETECT BIT(21)
|
|
#define REG_ADP_BC_ACA_PIN_RANGE_C BIT(22)
|
|
#define REG_ADP_BC_ACA_PIN_RANGE_B BIT(23)
|
|
#define REG_ADP_BC_ACA_PIN_RANGE_A BIT(24)
|
|
#define REG_ADP_BC_ACA_PIN_GND BIT(25)
|
|
#define REG_ADP_BC_ACA_PIN_FLOAT BIT(26)
|
|
|
|
#define RESET_COMPLETE_TIME 500
|
|
#define ACA_ENABLE_COMPLETE_TIME 50
|
|
|
|
struct phy_meson_gxbb_usb2_priv {
|
|
struct regmap *regmap;
|
|
struct reset_ctl_bulk resets;
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
struct udevice *phy_supply;
|
|
#endif
|
|
};
|
|
|
|
static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
|
|
uint val;
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
if (priv->phy_supply) {
|
|
int ret = regulator_set_enable(priv->phy_supply, true);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
regmap_update_bits(priv->regmap, REG_CONFIG,
|
|
REG_CONFIG_CLK_32k_ALTSEL,
|
|
REG_CONFIG_CLK_32k_ALTSEL);
|
|
regmap_update_bits(priv->regmap, REG_CTRL,
|
|
REG_CTRL_REF_CLK_SEL_MASK,
|
|
0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
|
|
regmap_update_bits(priv->regmap, REG_CTRL,
|
|
REG_CTRL_FSEL_MASK,
|
|
0x5 << REG_CTRL_FSEL_SHIFT);
|
|
|
|
/* reset the PHY */
|
|
regmap_update_bits(priv->regmap, REG_CTRL,
|
|
REG_CTRL_POWER_ON_RESET,
|
|
REG_CTRL_POWER_ON_RESET);
|
|
udelay(RESET_COMPLETE_TIME);
|
|
regmap_update_bits(priv->regmap, REG_CTRL,
|
|
REG_CTRL_POWER_ON_RESET,
|
|
0);
|
|
udelay(RESET_COMPLETE_TIME);
|
|
|
|
regmap_update_bits(priv->regmap, REG_CTRL,
|
|
REG_CTRL_SOF_TOGGLE_OUT,
|
|
REG_CTRL_SOF_TOGGLE_OUT);
|
|
|
|
/* Set host mode */
|
|
regmap_update_bits(priv->regmap, REG_ADP_BC,
|
|
REG_ADP_BC_ACA_ENABLE,
|
|
REG_ADP_BC_ACA_ENABLE);
|
|
udelay(ACA_ENABLE_COMPLETE_TIME);
|
|
|
|
regmap_read(priv->regmap, REG_ADP_BC, &val);
|
|
if (val & REG_ADP_BC_ACA_PIN_FLOAT) {
|
|
pr_err("Error powering on GXBB USB PHY\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_gxbb_usb2_power_off(struct phy *phy)
|
|
{
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
|
|
|
|
if (priv->phy_supply) {
|
|
int ret = regulator_set_enable(priv->phy_supply, false);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops meson_gxbb_usb2_phy_ops = {
|
|
.power_on = phy_meson_gxbb_usb2_power_on,
|
|
.power_off = phy_meson_gxbb_usb2_power_off,
|
|
};
|
|
|
|
static int meson_gxbb_usb2_phy_probe(struct udevice *dev)
|
|
{
|
|
struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
|
|
struct clk clk_usb_general, clk_usb;
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_get_by_name(dev, "usb_general", &clk_usb_general);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk_usb_general);
|
|
if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
|
|
pr_err("Failed to enable PHY general clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_get_by_name(dev, "usb", &clk_usb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk_usb);
|
|
if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
|
|
pr_err("Failed to enable PHY clock\n");
|
|
return ret;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
|
|
if (ret && ret != -ENOENT) {
|
|
pr_err("Failed to get PHY regulator\n");
|
|
return ret;
|
|
}
|
|
#endif
|
|
ret = reset_get_bulk(dev, &priv->resets);
|
|
if (!ret) {
|
|
ret = reset_deassert_bulk(&priv->resets);
|
|
if (ret) {
|
|
pr_err("Failed to deassert reset\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_gxbb_usb2_phy_remove(struct udevice *dev)
|
|
{
|
|
struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
|
|
|
|
return reset_release_bulk(&priv->resets);
|
|
}
|
|
|
|
static const struct udevice_id meson_gxbb_usb2_phy_ids[] = {
|
|
{ .compatible = "amlogic,meson8-usb2-phy" },
|
|
{ .compatible = "amlogic,meson8b-usb2-phy" },
|
|
{ .compatible = "amlogic,meson-gxbb-usb2-phy" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(meson_gxbb_usb2_phy) = {
|
|
.name = "meson_gxbb_usb2_phy",
|
|
.id = UCLASS_PHY,
|
|
.of_match = meson_gxbb_usb2_phy_ids,
|
|
.probe = meson_gxbb_usb2_phy_probe,
|
|
.remove = meson_gxbb_usb2_phy_remove,
|
|
.ops = &meson_gxbb_usb2_phy_ops,
|
|
.priv_auto_alloc_size = sizeof(struct phy_meson_gxbb_usb2_priv),
|
|
};
|