u-boot/configs/r8a77970_eagle_defconfig
Vignesh R 6d82517836 configs: Don't use SPI_FLASH_BAR as default
Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
not break functionality.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07 15:33:22 +05:30

69 lines
1.6 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_TEXT_BASE=0x50000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_RCAR_GEN3=y
CONFIG_R8A77970=y
CONFIG_TARGET_EAGLE=y
CONFIG_SMBIOS_PRODUCT_NAME=""
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20"
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="r8a77970-eagle.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="r8a77970-eagle-u-boot"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_BLK=y
CONFIG_CLK=y
CONFIG_CLK_RENESAS=y
CONFIG_DM_GPIO=y
CONFIG_RCAR_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_RCAR_IIC=y
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_DM_ETH=y
CONFIG_RENESAS_RAVB=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_PFC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SCIF_CONSOLE=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_RENESAS_RPC_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SMBIOS_MANUFACTURER=""