Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-02 01:19:49 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/keymile/km_arm/km_arm.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

552 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Prafulla Wadaskar <prafulla@marvell.com>
*
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2010
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*/
#include <common.h>
#include <i2c.h>
#include <nand.h>
#include <netdev.h>
#include <miiphy.h>
#include <spi.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* BOCO FPGA definitions
*/
#define BOCO 0x10
#define REG_CTRL_H 0x02
#define MASK_WRL_UNITRUN 0x01
#define MASK_RBX_PGY_PRESENT 0x40
#define REG_IRQ_CIRQ2 0x2d
#define MASK_RBI_DEFECT_16 0x01
/*
* PHY registers definitions
*/
#define PHY_MARVELL_OUI 0x5043
#define PHY_MARVELL_88E1118_MODEL 0x0022
#define PHY_MARVELL_88E1118R_MODEL 0x0024
#define PHY_MARVELL_PAGE_REG 0x0016
#define PHY_MARVELL_DEFAULT_PAGE 0x0000
#define PHY_MARVELL_88E1118R_LED_CTRL_PAGE 0x0003
#define PHY_MARVELL_88E1118R_LED_CTRL_REG 0x0010
#define PHY_MARVELL_88E1118R_LED_CTRL_RESERVED 0x1000
#define PHY_MARVELL_88E1118R_LED_CTRL_LED0_1000MB (0x7<<0)
#define PHY_MARVELL_88E1118R_LED_CTRL_LED1_ACT (0x3<<4)
#define PHY_MARVELL_88E1118R_LED_CTRL_LED2_LINK (0x0<<8)
/* I/O pin to erase flash RGPP09 = MPP43 */
#define KM_FLASH_ERASE_ENABLE 43
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
#if defined(KM_PCIE_RESET_MPP7)
MPP7_GPO,
#else
MPP7_PEX_RST_OUTn,
#endif
#if defined(CONFIG_SYS_I2C_SOFT)
MPP8_GPIO, /* SDA */
MPP9_GPIO, /* SCL */
#endif
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO, /* Reserved */
MPP13_UART1_TXD,
MPP14_UART1_RXD,
MPP15_GPIO, /* Not used */
MPP16_GPIO, /* Not used */
MPP17_GPIO, /* Reserved */
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_GPIO,
MPP21_GPIO,
MPP22_GPIO,
MPP23_GPIO,
MPP24_GPIO,
MPP25_GPIO,
MPP26_GPIO,
MPP27_GPIO,
MPP28_GPIO,
MPP29_GPIO,
MPP30_GPIO,
MPP31_GPIO,
MPP32_GPIO,
MPP33_GPIO,
MPP34_GPIO, /* CDL1 (input) */
MPP35_GPIO, /* CDL2 (input) */
MPP36_GPIO, /* MAIN_IRQ (input) */
MPP37_GPIO, /* BOARD_LED */
MPP38_GPIO, /* Piggy3 LED[1] */
MPP39_GPIO, /* Piggy3 LED[2] */
MPP40_GPIO, /* Piggy3 LED[3] */
MPP41_GPIO, /* Piggy3 LED[4] */
MPP42_GPIO, /* Piggy3 LED[5] */
MPP43_GPIO, /* Piggy3 LED[6] */
MPP44_GPIO, /* Piggy3 LED[7], BIST_EN_L */
MPP45_GPIO, /* Piggy3 LED[8] */
MPP46_GPIO, /* Reserved */
MPP47_GPIO, /* Reserved */
MPP48_GPIO, /* Reserved */
MPP49_GPIO, /* SW_INTOUTn */
0
};
static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
#if defined(CONFIG_KM_MGCOGE3UN)
/*
* Wait for startup OK from mgcoge3ne
*/
static int startup_allowed(void)
{
unsigned char buf;
/*
* Read CIRQ16 bit (bit 0)
*/
if (i2c_read(BOCO, REG_IRQ_CIRQ2, 1, &buf, 1) != 0)
printf("%s: Error reading Boco\n", __func__);
else
if ((buf & MASK_RBI_DEFECT_16) == MASK_RBI_DEFECT_16)
return 1;
return 0;
}
#endif
#if (defined(CONFIG_KM_PIGGY4_88E6061)|defined(CONFIG_KM_PIGGY4_88E6352))
/*
* All boards with PIGGY4 connected via a simple switch have ethernet always
* present.
*/
int ethernet_present(void)
{
return 1;
}
#else
int ethernet_present(void)
{
uchar buf;
int ret = 0;
if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
printf("%s: Error reading Boco\n", __func__);
return -1;
}
if ((buf & MASK_RBX_PGY_PRESENT) == MASK_RBX_PGY_PRESENT)
ret = 1;
return ret;
}
#endif
static int initialize_unit_leds(void)
{
/*
* Init the unit LEDs per default they all are
* ok apart from bootstat
*/
uchar buf;
if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
printf("%s: Error reading Boco\n", __func__);
return -1;
}
buf |= MASK_WRL_UNITRUN;
if (i2c_write(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
printf("%s: Error writing Boco\n", __func__);
return -1;
}
return 0;
}
static void set_bootcount_addr(void)
{
uchar buf[32];
unsigned int bootcountaddr;
bootcountaddr = gd->ram_size - BOOTCOUNT_ADDR;
sprintf((char *)buf, "0x%x", bootcountaddr);
env_set("bootcountaddr", (char *)buf);
}
int misc_init_r(void)
{
#if defined(CONFIG_KM_MGCOGE3UN)
char *wait_for_ne;
u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE);
wait_for_ne = env_get("waitforne");
if ((wait_for_ne != NULL) && (dip_switch == 0)) {
if (strcmp(wait_for_ne, "true") == 0) {
int cnt = 0;
int abort = 0;
puts("NE go: ");
while (startup_allowed() == 0) {
if (tstc()) {
(void) getc(); /* consume input */
abort = 1;
break;
}
udelay(200000);
cnt++;
if (cnt == 5)
puts("wait\b\b\b\b");
if (cnt == 10) {
cnt = 0;
puts(" \b\b\b\b");
}
}
if (abort == 1)
printf("\nAbort waiting for ne\n");
else
puts("OK\n");
}
}
#endif
ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
initialize_unit_leds();
set_km_env();
set_bootcount_addr();
return 0;
}
int board_early_init_f(void)
{
#if defined(CONFIG_SYS_I2C_SOFT)
u32 tmp;
/* set the 2 bitbang i2c pins as output gpios */
tmp = readl(MVEBU_GPIO0_BASE + 4);
writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , MVEBU_GPIO0_BASE + 4);
#endif
/* adjust SDRAM size for bank 0 */
mvebu_sdram_size_adjust(0);
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
/*
* The KM_FLASH_GPIO_PIN switches between using a
* NAND or a SPI FLASH. Set this pin on start
* to NAND mode.
*/
kw_gpio_set_valid(KM_FLASH_GPIO_PIN, 1);
kw_gpio_direction_output(KM_FLASH_GPIO_PIN, 1);
#if defined(CONFIG_SYS_I2C_SOFT)
/*
* Reinit the GPIO for I2C Bitbang driver so that the now
* available gpio framework is consistent. The calls to
* direction output in are not necessary, they are already done in
* board_early_init_f
*/
kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1);
kw_gpio_set_valid(KM_KIRKWOOD_SCL_PIN, 1);
#endif
#if defined(CONFIG_SYS_EEPROM_WREN)
kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38);
kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1);
#endif
#if defined(CONFIG_KM_FPGA_CONFIG)
trigger_fpga_config();
#endif
return 0;
}
int board_late_init(void)
{
#if (defined(CONFIG_KM_COGE5UN) | defined(CONFIG_KM_MGCOGE3UN))
u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE);
/* if pin 1 do full erase */
if (dip_switch != 0) {
/* start bootloader */
puts("DIP: Enabled\n");
env_set("actual_bank", "0");
}
#endif
#if defined(CONFIG_KM_FPGA_CONFIG)
wait_for_fpga_config();
fpga_reset();
toggle_eeprom_spi_bus();
#endif
return 0;
}
int board_spi_claim_bus(struct spi_slave *slave)
{
kw_gpio_set_value(KM_FLASH_GPIO_PIN, 0);
return 0;
}
void board_spi_release_bus(struct spi_slave *slave)
{
kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1);
}
#if (defined(CONFIG_KM_PIGGY4_88E6061))
#define PHY_LED_SEL_REG 0x18
#define PHY_LED0_LINK (0x5)
#define PHY_LED1_ACT (0x8<<4)
#define PHY_LED2_INT (0xe<<8)
#define PHY_SPEC_CTRL_REG 0x1c
#define PHY_RGMII_CLK_STABLE (0x1<<10)
#define PHY_CLSA (0x1<<1)
/* Configure and enable MV88E3018 PHY */
void reset_phy(void)
{
char *name = "egiga0";
unsigned short reg;
if (miiphy_set_current_dev(name))
return;
/* RGMII clk transition on data stable */
if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, &reg))
printf("Error reading PHY spec ctrl reg\n");
if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG,
reg | PHY_RGMII_CLK_STABLE | PHY_CLSA))
printf("Error writing PHY spec ctrl reg\n");
/* leds setup */
if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG,
PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT))
printf("Error writing PHY LED reg\n");
/* reset the phy */
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
}
#elif defined(CONFIG_KM_PIGGY4_88E6352)
#include <mv88e6352.h>
#if defined(CONFIG_KM_NUSA)
struct mv88e_sw_reg extsw_conf[] = {
/*
* port 0, PIGGY4, autoneg
* first the fix for the 1000Mbits Autoneg, this is from
* a Marvell errata, the regs are undocumented
*/
{ PHY(0), PHY_PAGE, AN1000FIX_PAGE },
{ PHY(0), PHY_STATUS, AN1000FIX },
{ PHY(0), PHY_PAGE, 0 },
/* now the real port and phy configuration */
{ PORT(0), PORT_PHY, NO_SPEED_FOR },
{ PORT(0), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
{ PHY(0), PHY_1000_CTRL, NO_ADV },
{ PHY(0), PHY_SPEC_CTRL, AUTO_MDIX_EN },
{ PHY(0), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
FULL_DUPLEX },
/* port 1, unused */
{ PORT(1), PORT_CTRL, PORT_DIS },
{ PHY(1), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(1), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 2, unused */
{ PORT(2), PORT_CTRL, PORT_DIS },
{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 3, unused */
{ PORT(3), PORT_CTRL, PORT_DIS },
{ PHY(3), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(3), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 4, ICNEV, SerDes, SGMII */
{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
{ PORT(4), PORT_PHY, SPEED_1000_FOR },
{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
{ PHY(4), PHY_CTRL, PHY_PWR_DOWN },
{ PHY(4), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
/* port 5, CPU_RGMII */
{ PORT(5), PORT_PHY, RX_RGMII_TIM | TX_RGMII_TIM | FLOW_CTRL_EN |
FLOW_CTRL_FOR | LINK_VAL | LINK_FOR | FULL_DPX |
FULL_DPX_FOR | SPEED_1000_FOR },
{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
/* port 6, unused, this port has no phy */
{ PORT(6), PORT_CTRL, PORT_DIS },
};
#else
struct mv88e_sw_reg extsw_conf[] = {};
#endif
void reset_phy(void)
{
#if defined(CONFIG_KM_MVEXTSW_ADDR)
char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
ARRAY_SIZE(extsw_conf));
mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
#endif
}
#else
/* Configure and enable MV88E1118 PHY on the piggy*/
void reset_phy(void)
{
unsigned int oui;
unsigned char model, rev;
char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
/* reset the phy */
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
/* get PHY model */
if (miiphy_info(name, CONFIG_PHY_BASE_ADR, &oui, &model, &rev))
return;
/* check for Marvell 88E1118R Gigabit PHY (PIGGY3) */
if ((oui == PHY_MARVELL_OUI) &&
(model == PHY_MARVELL_88E1118R_MODEL)) {
/* set page register to 3 */
if (miiphy_write(name, CONFIG_PHY_BASE_ADR,
PHY_MARVELL_PAGE_REG,
PHY_MARVELL_88E1118R_LED_CTRL_PAGE))
printf("Error writing PHY page reg\n");
/*
* leds setup as printed on PCB:
* LED2 (Link): 0x0 (On Link, Off No Link)
* LED1 (Activity): 0x3 (On Activity, Off No Activity)
* LED0 (Speed): 0x7 (On 1000 MBits, Off Else)
*/
if (miiphy_write(name, CONFIG_PHY_BASE_ADR,
PHY_MARVELL_88E1118R_LED_CTRL_REG,
PHY_MARVELL_88E1118R_LED_CTRL_RESERVED |
PHY_MARVELL_88E1118R_LED_CTRL_LED0_1000MB |
PHY_MARVELL_88E1118R_LED_CTRL_LED1_ACT |
PHY_MARVELL_88E1118R_LED_CTRL_LED2_LINK))
printf("Error writing PHY LED reg\n");
/* set page register back to 0 */
if (miiphy_write(name, CONFIG_PHY_BASE_ADR,
PHY_MARVELL_PAGE_REG,
PHY_MARVELL_DEFAULT_PAGE))
printf("Error writing PHY page reg\n");
}
}
#endif
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var(void)
{
ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return 0;
}
#endif
#if defined(CONFIG_SYS_I2C_SOFT)
void set_sda(int state)
{
I2C_ACTIVE;
I2C_SDA(state);
}
void set_scl(int state)
{
I2C_SCL(state);
}
int get_sda(void)
{
I2C_TRISTATE;
return I2C_READ;
}
int get_scl(void)
{
return kw_gpio_get_value(KM_KIRKWOOD_SCL_PIN) ? 1 : 0;
}
#endif
#if defined(CONFIG_POST)
#define KM_POST_EN_L 44
#define POST_WORD_OFF 8
int post_hotkeys_pressed(void)
{
#if defined(CONFIG_KM_COGE5UN)
return kw_gpio_get_value(KM_POST_EN_L);
#else
return !kw_gpio_get_value(KM_POST_EN_L);
#endif
}
ulong post_word_load(void)
{
void* addr = (void *) (gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF);
return in_le32(addr);
}
void post_word_store(ulong value)
{
void* addr = (void *) (gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF);
out_le32(addr, value);
}
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
{
*vstart = CONFIG_SYS_SDRAM_BASE;
/* we go up to relocation plus a 1 MB margin */
*size = CONFIG_SYS_TEXT_BASE - (1<<20);
return 0;
}
#endif
#if defined(CONFIG_SYS_EEPROM_WREN)
int eeprom_write_enable(unsigned dev_addr, int state)
{
kw_gpio_set_value(KM_KIRKWOOD_ENV_WP, !state);
return !kw_gpio_get_value(KM_KIRKWOOD_ENV_WP);
}
#endif
Reference in a new issue View git blame Copy permalink