u-boot/drivers/power/regulator/act8846.c
Simon Glass 9119820b6b power: regulator: Add a driver for ACT8846 regulators
Add a full regulator driver for the ACT8846. This provides easy access to
voltage and current settings for each regulator.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00

155 lines
3.2 KiB
C

/*
* Copyright (C) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
* Based on Rockchip's drivers/power/pmic/pmic_act8846.c:
* Copyright (C) 2012 rockchips
* zyw <zyw@rock-chips.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <power/act8846_pmic.h>
#include <power/pmic.h>
#include <power/regulator.h>
static const u16 voltage_map[] = {
600, 625, 650, 675, 700, 725, 750, 775,
800, 825, 850, 875, 900, 925, 950, 975,
1000, 1025, 1050, 1075, 1100, 1125, 1150, 1175,
1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550,
1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950,
2000, 2050, 2100, 2150, 2200, 2250, 2300, 2350,
2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100,
3200, 3300, 3400, 3500, 3600, 3700, 3800, 3900,
};
enum {
REG_SYS0,
REG_SYS1,
REG1_VOL = 0x10,
REG1_CTL = 0X11,
REG2_VOL0 = 0x20,
REG2_VOL1,
REG2_CTL,
REG3_VOL0 = 0x30,
REG3_VOL1,
REG3_CTL,
REG4_VOL0 = 0x40,
REG4_VOL1,
REG4_CTL,
REG5_VOL = 0x50,
REG5_CTL,
REG6_VOL = 0X58,
REG6_CTL,
REG7_VOL = 0x60,
REG7_CTL,
REG8_VOL = 0x68,
REG8_CTL,
REG9_VOL = 0x70,
REG9_CTL,
REG10_VOL = 0x80,
REG10_CTL,
REG11_VOL = 0x90,
REG11_CTL,
REG12_VOL = 0xa0,
REG12_CTL,
REG13 = 0xb1,
};
static const u8 addr_vol[] = {
0, REG1_VOL, REG2_VOL0, REG3_VOL0, REG4_VOL0,
REG5_VOL, REG6_VOL, REG7_VOL, REG8_VOL, REG9_VOL,
REG10_VOL, REG11_VOL, REG12_VOL,
};
static const u8 addr_ctl[] = {
0, REG1_CTL, REG2_CTL, REG3_CTL, REG4_CTL,
REG5_CTL, REG6_CTL, REG7_CTL, REG8_CTL, REG9_CTL,
REG10_CTL, REG11_CTL, REG12_CTL,
};
static int check_volt_table(const u16 *volt_table, int uvolt)
{
int i;
for (i = VOL_MIN_IDX; i < VOL_MAX_IDX; i++) {
if (uvolt <= (volt_table[i] * 1000))
return i;
}
return -EINVAL;
}
static int reg_get_value(struct udevice *dev)
{
int reg = dev->driver_data;
int ret;
ret = pmic_reg_read(dev->parent, reg);
if (ret < 0)
return ret;
return voltage_map[ret & LDO_VOL_MASK] * 1000;
}
static int reg_set_value(struct udevice *dev, int uvolt)
{
int reg = dev->driver_data;
int val;
val = check_volt_table(voltage_map, uvolt);
if (val < 0)
return val;
return pmic_clrsetbits(dev->parent, addr_vol[reg], LDO_VOL_MASK, val);
}
static int reg_set_enable(struct udevice *dev, bool enable)
{
int reg = dev->driver_data;
return pmic_clrsetbits(dev->parent, addr_ctl[reg], LDO_EN_MASK,
enable ? LDO_EN_MASK : 0);
}
static bool reg_get_enable(struct udevice *dev)
{
int reg = dev->driver_data;
int ret;
ret = pmic_reg_read(dev->parent, reg);
if (ret < 0)
return ret;
return ret & LDO_EN_MASK ? true : false;
}
static int act8846_reg_probe(struct udevice *dev)
{
struct dm_regulator_uclass_platdata *uc_pdata;
int reg = dev->driver_data;
uc_pdata = dev_get_uclass_platdata(dev);
uc_pdata->type = reg <= 4 ? REGULATOR_TYPE_BUCK : REGULATOR_TYPE_LDO;
uc_pdata->mode_count = 0;
return 0;
}
static const struct dm_regulator_ops act8846_reg_ops = {
.get_value = reg_get_value,
.set_value = reg_set_value,
.get_enable = reg_get_enable,
.set_enable = reg_set_enable,
};
U_BOOT_DRIVER(act8846_buck) = {
.name = "act8846_reg",
.id = UCLASS_REGULATOR,
.ops = &act8846_reg_ops,
.probe = act8846_reg_probe,
};