mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
138 lines
3.6 KiB
ArmAsm
138 lines
3.6 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2012-2015 Panasonic Corporation
|
|
* Copyright (C) 2015-2016 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/sizes.h>
|
|
#include <asm/system.h>
|
|
|
|
ENTRY(lowlevel_init)
|
|
mov r8, lr @ persevere link reg across call
|
|
|
|
/*
|
|
* The UniPhier Boot ROM loads SPL code to the L2 cache.
|
|
* But CPUs can only do instruction fetch now because start.S has
|
|
* cleared C and M bits.
|
|
* First we need to turn on MMU and Dcache again to get back
|
|
* data access to L2.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
|
|
orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
#ifdef CONFIG_DEBUG_LL
|
|
bl debug_ll_init
|
|
#endif
|
|
|
|
bl setup_init_ram @ RAM area for stack and page table
|
|
|
|
/*
|
|
* Now we are using the page table embedded in the Boot ROM.
|
|
* What we need to do next is to create a page table and switch
|
|
* over to it.
|
|
*/
|
|
bl create_page_table
|
|
bl __v7_flush_dcache_all
|
|
|
|
/* Disable MMU and Dcache before switching Page Table */
|
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
|
|
bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
bl enable_mmu
|
|
|
|
mov lr, r8 @ restore link
|
|
mov pc, lr @ back to my caller
|
|
ENDPROC(lowlevel_init)
|
|
|
|
ENTRY(enable_mmu)
|
|
mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register)
|
|
bic r0, r0, #0x37
|
|
orr r0, r0, #0x20 @ disable TTBR1
|
|
mcr p15, 0, r0, c2, c0, 2
|
|
|
|
orr r0, r12, #0x8 @ Outer Cacheability for table walks: WBWA
|
|
mcr p15, 0, r0, c2, c0, 0 @ TTBR0
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs
|
|
|
|
mov r0, #-1 @ manager for all domains (No permission check)
|
|
mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register)
|
|
|
|
dsb
|
|
isb
|
|
/*
|
|
* MMU on:
|
|
* TLBs was already invalidated in "../start.S"
|
|
* So, we don't need to invalidate it here.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
|
|
orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
mov pc, lr
|
|
ENDPROC(enable_mmu)
|
|
|
|
/*
|
|
* For PH1-Pro4 or older SoCs, the size of WAY is 32KB.
|
|
* It is large enough for tmp RAM.
|
|
*/
|
|
#define BOOT_RAM_SIZE (SZ_32K)
|
|
#define BOOT_RAM_BASE ((CONFIG_SPL_STACK) - (BOOT_RAM_SIZE))
|
|
#define BOOT_RAM_WAYS (0x00000100) @ way 8
|
|
|
|
#define SSCO_BASE 0x506c0000
|
|
#define SSCOPE 0x244
|
|
#define SSCOQM 0x248
|
|
#define SSCOQAD 0x24c
|
|
#define SSCOQSZ 0x250
|
|
#define SSCOQWN 0x258
|
|
#define SSCOPPQSEF 0x25c
|
|
#define SSCOLPQS 0x260
|
|
|
|
ENTRY(setup_init_ram)
|
|
ldr r1, = SSCO_BASE
|
|
|
|
/* Touch to zero for the boot way */
|
|
0: ldr r0, = 0x00408006 @ touch to zero with address range
|
|
str r0, [r1, #SSCOQM]
|
|
ldr r0, = BOOT_RAM_BASE
|
|
str r0, [r1, #SSCOQAD]
|
|
ldr r0, = BOOT_RAM_SIZE
|
|
str r0, [r1, #SSCOQSZ]
|
|
ldr r0, = BOOT_RAM_WAYS
|
|
str r0, [r1, #SSCOQWN]
|
|
ldr r0, [r1, #SSCOPPQSEF]
|
|
cmp r0, #0 @ check if the command is successfully set
|
|
bne 0b @ try again if an error occurs
|
|
|
|
1: ldr r0, [r1, #SSCOLPQS]
|
|
cmp r0, #0x4
|
|
bne 1b @ wait until the operation is completed
|
|
str r0, [r1, #SSCOLPQS] @ clear the complete notification flag
|
|
|
|
mov pc, lr
|
|
ENDPROC(setup_init_ram)
|
|
|
|
#define DEVICE 0x00002002 /* Non-shareable Device */
|
|
#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
|
|
|
|
ENTRY(create_page_table)
|
|
ldr r0, = DEVICE
|
|
ldr r1, = BOOT_RAM_BASE
|
|
mov r12, r1 @ r12 is preserved during D-cache flush
|
|
0: str r0, [r1], #4 @ specify all the sections as Device
|
|
adds r0, r0, #0x00100000
|
|
bcc 0b
|
|
|
|
ldr r0, = NORMAL
|
|
str r0, [r12] @ mark the first section as Normal
|
|
add r0, r0, #0x00100000
|
|
str r0, [r12, #4] @ mark the second section as Normal
|
|
mov pc, lr
|
|
ENDPROC(create_page_table)
|