2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-14 07:13:03 +00:00
u-boot/arch/arm/dts/rv1108-evb.dts
Neil Armstrong ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30

79 lines
1.2 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*/
/dts-v1/;
#include "rv1108.dtsi"
/ {
model = "Rockchip RV1108 Evaluation board";
compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x08000000>;
};
chosen {
stdout-path = "serial2:1500000n8";
};
vcc5v0_otg: vcc5v0-otg-drv {
compatible = "regulator-fixed";
enable-active-high;
regulator-name = "vcc5v0_otg";
gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&gmac {
status = "okay";
clock_in_out = <0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
};
&saradc {
status = "okay";
};
&sfc {
status = "okay";
flash@0 {
compatible = "gd25q256","jedec,spi-nor";
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
spi-max-frequency = <96000000>;
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&usb20_otg {
vbus-supply = <&vcc5v0_otg>;
status = "okay";
};
&usb_host_ehci {
status = "okay";
};
&usb_host_ohci {
status = "okay";
};