mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
7a4b6964b5
This patch adds SPL support for mtmips platform. The lowlevel architecture is split into SPL and the rest parts are built into a memory loadable u-boot image. Optional SPL_DM and OF_CONTROL are also supported. The increment of size is very small (< 10 KiB) if SPL_DM and OF_CONTROL are not enabled and the memory bootable u-boot (u-boot.img) is generated automatically so there is not need to add a separate config for it. A lzma compressed payload (u-boot-lzma.img) is also generated and it will be combined with u-boot-spl.bin to form the unified ROM bootable binary u-boot-mtmips.bin. A spl loader is added to support uncompress the payload. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
412 lines
7.2 KiB
Text
412 lines
7.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
#include <dt-bindings/clock/mt7628-clk.h>
|
|
#include <dt-bindings/reset/mt7628-reset.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "ralink,mt7628a-soc";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "mti,mips24KEc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
cpuintc: interrupt-controller {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
};
|
|
|
|
clk48m: clk48m@0 {
|
|
compatible = "fixed-clock";
|
|
|
|
clock-frequency = <48000000>;
|
|
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
palmbus: palmbus@10000000 {
|
|
compatible = "palmbus", "simple-bus";
|
|
reg = <0x10000000 0x200000>;
|
|
ranges = <0x0 0x10000000 0x1FFFFF>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sysc: system-controller@0 {
|
|
compatible = "ralink,mt7620a-sysc", "syscon";
|
|
reg = <0x0 0x100>;
|
|
};
|
|
|
|
reboot: resetctl-reboot {
|
|
compatible = "resetctl-reboot";
|
|
|
|
resets = <&rstctrl MT7628_SYS_RST>;
|
|
reset-names = "sysreset";
|
|
};
|
|
|
|
clkctrl: clkctrl@0x2c {
|
|
reg = <0x2c 0x8>, <0x10 0x4>;
|
|
reg-names = "syscfg0", "clkcfg";
|
|
compatible = "mediatek,mt7628-clk";
|
|
#clock-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
rstctrl: rstctrl@0x34 {
|
|
reg = <0x34 0x4>;
|
|
compatible = "mediatek,mtmips-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pinctrl: pinctrl@60 {
|
|
compatible = "mediatek,mt7628-pinctrl";
|
|
reg = <0x3c 0x2c>, <0x1300 0x100>;
|
|
reg-names = "gpiomode", "padconf";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
state_default: pin_state {
|
|
};
|
|
|
|
spi_single_pins: spi_single_pins {
|
|
groups = "spi";
|
|
function = "spi";
|
|
};
|
|
|
|
spi_dual_pins: spi_dual_pins {
|
|
spi_master_pins {
|
|
groups = "spi";
|
|
function = "spi";
|
|
};
|
|
|
|
spi_cs1_pin {
|
|
groups = "spi cs1";
|
|
function = "spi cs1";
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0_pins {
|
|
groups = "uart0";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pins: uart1_pins {
|
|
groups = "uart1";
|
|
function = "uart1";
|
|
};
|
|
|
|
uart2_pins: uart2_pins {
|
|
groups = "uart2";
|
|
function = "uart2";
|
|
};
|
|
|
|
uart2_pwm_pins: uart2_pwm_pins {
|
|
groups = "spis";
|
|
function = "pwm_uart2";
|
|
};
|
|
|
|
i2c_pins: i2c_pins {
|
|
groups = "i2c";
|
|
function = "i2c";
|
|
};
|
|
|
|
ephy_iot_mode: ephy_iot_mode {
|
|
ephy4_1_dis {
|
|
groups = "ephy4_1_pad";
|
|
function = "digital";
|
|
};
|
|
|
|
ephy0_en {
|
|
groups = "ephy0";
|
|
function = "enable";
|
|
};
|
|
};
|
|
|
|
ephy_router_mode: ephy_router_mode {
|
|
ephy4_1_en {
|
|
groups = "ephy4_1_pad";
|
|
function = "analog";
|
|
};
|
|
|
|
ephy0_en {
|
|
groups = "ephy0";
|
|
function = "enable";
|
|
};
|
|
};
|
|
|
|
sd_iot_mode: sd_iot_mode {
|
|
ephy4_1_dis {
|
|
groups = "ephy4_1_pad";
|
|
function = "digital";
|
|
};
|
|
|
|
sdxc_en {
|
|
groups = "sdmode";
|
|
function = "sdxc";
|
|
};
|
|
|
|
sdxc_iot_mode {
|
|
groups = "sd router";
|
|
function = "iot";
|
|
};
|
|
|
|
sd_clk_pad {
|
|
pins = "sd_clk";
|
|
drive-strength-4g = <8>;
|
|
};
|
|
};
|
|
|
|
sd_router_mode: sd_router_mode {
|
|
sdxc_router_mode {
|
|
groups = "sd router";
|
|
function = "router";
|
|
};
|
|
|
|
sdxc_map_pins {
|
|
groups = "gpio0", "i2s", "sdmode", \
|
|
"i2c", "uart1";
|
|
function = "gpio";
|
|
};
|
|
|
|
sd_clk_pad {
|
|
pins = "gpio0";
|
|
drive-strength-28 = <8>;
|
|
};
|
|
};
|
|
|
|
emmc_iot_8bit_mode: emmc_iot_8bit_mode {
|
|
ephy4_1_dis {
|
|
groups = "ephy4_1_pad";
|
|
function = "digital";
|
|
};
|
|
|
|
emmc_en {
|
|
groups = "sdmode";
|
|
function = "sdxc";
|
|
};
|
|
|
|
emmc_iot_mode {
|
|
groups = "sd router";
|
|
function = "iot";
|
|
};
|
|
|
|
emmc_d4_d5 {
|
|
groups = "uart2";
|
|
function = "sdxc d5 d4";
|
|
};
|
|
|
|
emmc_d6 {
|
|
groups = "pwm1";
|
|
function = "sdxc d6";
|
|
};
|
|
|
|
emmc_d7 {
|
|
groups = "pwm0";
|
|
function = "sdxc d7";
|
|
};
|
|
|
|
sd_clk_pad {
|
|
pins = "sd_clk";
|
|
drive-strength-4g = <8>;
|
|
};
|
|
};
|
|
};
|
|
|
|
watchdog: watchdog@100 {
|
|
compatible = "ralink,mt7628a-wdt", "mediatek,mt7621-wdt";
|
|
reg = <0x100 0x30>;
|
|
|
|
resets = <&rstctrl MT7628_TIMER_RST>;
|
|
reset-names = "wdt";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <24>;
|
|
};
|
|
|
|
intc: interrupt-controller@200 {
|
|
compatible = "ralink,rt2880-intc";
|
|
reg = <0x200 0x100>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
resets = <&rstctrl MT7628_INT_RST>;
|
|
reset-names = "intc";
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
|
|
ralink,intc-registers = <0x9c 0xa0
|
|
0x6c 0xa4
|
|
0x80 0x78>;
|
|
};
|
|
|
|
memory-controller@300 {
|
|
compatible = "ralink,mt7620a-memc";
|
|
reg = <0x300 0x100>;
|
|
};
|
|
|
|
gpio@600 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
|
|
reg = <0x600 0x100>;
|
|
|
|
resets = <&rstctrl MT7628_PIO_RST>;
|
|
reset-names = "pio";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
gpio0: bank@0 {
|
|
reg = <0>;
|
|
compatible = "mtk,mt7621-gpio-bank";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpio1: bank@1 {
|
|
reg = <1>;
|
|
compatible = "mtk,mt7621-gpio-bank";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpio2: bank@2 {
|
|
reg = <2>;
|
|
compatible = "mtk,mt7621-gpio-bank";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
spi0: spi@b00 {
|
|
compatible = "ralink,mt7621-spi";
|
|
reg = <0xb00 0x40>;
|
|
|
|
resets = <&rstctrl MT7628_SPI_RST>;
|
|
reset-names = "spi";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clocks = <&clkctrl CLK_SPI>;
|
|
};
|
|
|
|
uart0: uartlite@c00 {
|
|
compatible = "mediatek,hsuart", "ns16550a";
|
|
reg = <0xc00 0x100>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
|
|
clocks = <&clkctrl CLK_UART0>;
|
|
|
|
resets = <&rstctrl MT7628_UART0_RST>;
|
|
reset-names = "uart0";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <20>;
|
|
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
uart1: uart1@d00 {
|
|
compatible = "mediatek,hsuart", "ns16550a";
|
|
reg = <0xd00 0x100>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
|
|
clocks = <&clkctrl CLK_UART1>;
|
|
|
|
resets = <&rstctrl MT7628_UART1_RST>;
|
|
reset-names = "uart1";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <21>;
|
|
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
uart2: uart2@e00 {
|
|
compatible = "mediatek,hsuart", "ns16550a";
|
|
reg = <0xe00 0x100>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
|
|
clocks = <&clkctrl CLK_UART2>;
|
|
|
|
resets = <&rstctrl MT7628_UART2_RST>;
|
|
reset-names = "uart2";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <22>;
|
|
|
|
reg-shift = <2>;
|
|
};
|
|
};
|
|
|
|
eth: eth@10110000 {
|
|
compatible = "mediatek,mt7628-eth";
|
|
reg = <0x10100000 0x10000
|
|
0x10110000 0x8000>;
|
|
|
|
resets = <&rstctrl MT7628_EPHY_RST>;
|
|
reset-names = "ephy";
|
|
|
|
syscon = <&sysc>;
|
|
};
|
|
|
|
usb_phy: usb-phy@10120000 {
|
|
compatible = "mediatek,mt7628-usbphy";
|
|
reg = <0x10120000 0x1000>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
ralink,sysctl = <&sysc>;
|
|
|
|
resets = <&rstctrl MT7628_UPHY_RST>;
|
|
reset-names = "phy";
|
|
|
|
clocks = <&clkctrl CLK_UPHY>;
|
|
clock-names = "cg";
|
|
};
|
|
|
|
ehci@101c0000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x101c0000 0x1000>;
|
|
|
|
phys = <&usb_phy>;
|
|
phy-names = "usb";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <18>;
|
|
};
|
|
|
|
mmc: mmc@10130000 {
|
|
compatible = "mediatek,mt7620-mmc";
|
|
reg = <0x10130000 0x4000>;
|
|
builtin-cd = <1>;
|
|
r_smpl = <1>;
|
|
|
|
clocks = <&clk48m>, <&clkctrl CLK_SDXC>;
|
|
clock-names = "source", "hclk";
|
|
|
|
resets = <&rstctrl MT7628_SDXC_RST>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|